The MiniBump is the lowest cost product and simple to use for calibrating or bump testing your gas detector. It is certified to be intrinsically safer for operation on potentially explosive atmospheres. The MiniBump operates with interchangeable generating sources providing either fixed concentration output for calibration of bump output to drive your detector into alarm for operational verification. The complete device provides the equivalent of 5 58L cylinders of gas.

Features

• Interchangeable generating cells
• Automatic shut down after each test
• Alkaline battery powered
• Disposable generating source
• CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark
• ATEX II3G EEx nL IIB T4

Specifications

Hydrogen Sulfide	Minimum 25 ppm
Chlorine	Minimum 5 ppm
Hydrogen Cyanide	Minimum 10 ppm
Hydrogen	Minimum 25 ppm
Useful Cell Life	Source defined
Bump Test Time	Less than 120 seconds
Operating Temperature	-40 to 50°C
Relative Humidity	0-100%
Battery Power	2 Alkaline AA cells
Battery Life	About 10 hours
Intrinsic Safety	Class 1, Division 1, Groups A, B, C, D
Size	4″L x 2.36″ W x 1.18″ H
Weight	0.5 pounds

Ordering Information

All MiniBump units are shipped with a rubber calibration cup, an instruction card and two AA alkaline batteries. For pricing call AFC International, Inc. at 800-952-3293 or 219-987-6825 or fax 219-987-6826 or emailsales@afcintl.com.

Description	Catalog No.
MiniBump Gas Generator, order cell separately	750-0401-00
MiniBump, Wall Mount, Cl2 cell	210-0750-00
MiniBump, Wall Mount H2S cell	210-0750-05
Chlorine Bump Cell, 350 tests	510-0500-01
Hydrogen Sulfide Bump Cell, 350 tests	510-0550-02
Hydrogen Cyanide Bump Cell, 350 tests	510-0570-02
Hydrogen Bump Cell, 350 tests	510-0590-02
Chlorine Calibration Cell, Specify range, 1-25 ppm	510-0401-0X
Hydrogen Calibration Cell, specify range, 1-25 ppm	510-0451-0X
Hydrogen Sulfide Calibration Cell, specify range, 1-25 ppm	510-0471-0X
Hydrogen Cyanide Calibration Cell, specify range, 1-25 ppm	510-0491-0X

Downloads

MiniBump Gas Generator Literature

The AFC International Bump Test Station is an easy to use device for the verification of sensor response of your multi gas or personal gas detectors. This simple bump test can be performed in less than 60 seconds and will give you the piece of mind that your instrument is responding to gas properly, prior to entering a confined space or dangerous gas area in a plant.

The wall mounted Bump Test Station can be modified to work with any make or model instrument on the market. A simple push of the start button activates the flow of test gas. A green light turns on, indicating the system is working. The flow meter on the front of the unit verifies that gas is flowing. In about 30 seconds all alarms on the instrument should be activated. If they are not, the instrument should not be used and then sent in for service. The station automatically shuts off after the selected time period and the green light goes out. AFC International uses quality gas standards that are certified accurate. The Bump Test Station can use any concentration of gas and cylinder sizes. We recommend that you use a gas concentration high enough to insure that all gas sensor alarms will be activated within a 30 to 60 second time period.

The Bump Test Station is a perfect compliment to any company’s calibration or maintenance schedule and can be customized to fit your gas detection program.The AFC International Bump Test Station is not intended to and/or should not be used to replace periodic instrument manufacturer’s recommended gas calibration interval! It is simply a test that can fill in the gaps between calibrations.

The ISEA passed a new statement in November 2009. This was after 2 1/2 years of debate. The definition of a bump test has now been expanded into two methods. There is now a qualitative (bump) and a quantitative (calibration check) for all gas monitors. The new statement is available here.

Product Video Reviews

Specifications

Power	110 VAC, 56″ cord supplied with unit
Enclosure	Single Channel: 22″ H x 11″ W x 6.25″ D Dual Channel: 22″ H x 15″ W x 7″ D Wall mounted, NEMA 4X
Flow Rate	0.3 – 1.5 LPM (300 – 1,500 cc) standard others available
Test Time	1 to 60 seconds, adjustable, 30 seconds standard with automatic shut off and reset switch
Compatibility	Any diffusion or sample draw instrument, may require instrument manufacturer’s calibration adapter
Cylinder Size	58 & 103 L cylinders standard, others available
Number of Tests @ 30 seconds	224 test per 58L cylinder at 30 seconds 412 tests per 103L cylinder at 30 seconds

Ordering Information

Description	Catalog No.
Single Channel Bump Test Station without gas	BTS101
Dual Channel Bump Test Station without gas	BTS201

Downloads

Bump Test Literature

Real Time Electronic Access to Certificate of Analysis (COA) and Safety Data Sheet (SDS) with the PortaGas Mobile app. Get immediate access to electronic COA and SDS, real time cylinder management capabilities and Strip & Ship return support. The PortaGas mobile app provides greater integrity and efficiency in managing required cylinder documentation. Quickly retrieve and email to your desktop on demand electronic Certificates of Analysis (eCOAs) and Safety Data Sheets (SDSs) for each cylinder. Scan cylinder label QR codes with your electronic device to receive and store cylinder information. Quickly verify gas components and expiration dates of calibration gas to ensure compliance. Simplify cylinder management and cylinder tracking in your facility by using you device or a mobile database of cylinder information.

Features

• Quickly retrieve and email eCOAs and SDSs
• Scan and store cylinder information, blend expiration dates and blend specifications in your phone
• Set alerts to monitor and anticipate the expiration of your gas blend to ensure process quality
• Create, store and email your cylinder reorder list

PortaGreen calibration gas cylinders can be conveniently returned to PortaGas for reuse using the Strip and Ship program. These cylinders are more compact and globally approved.

The Strip and Ship Program Features

• Eliminates Hazmat disposal fees
• Pre-paid FedEx Labels included with each cylinder, return to PortaGas at no cost to you
• No valve to break or cylinder to drill out
• Double your volume with the same environmental footprint
• Simply strip off the perforated shrink wrap on the outer tube and place in the plastic tube

How to Use

• Strip outer layer of shrink wrap at the perforation to reveal the tube for the cylinder of gas
• Remove the black cap and place on the bottom of the tube. Either remove your cylinder of gas or use it while in the tube
• Attach regulator to cylinder and use cylinder until empty
• When gauge reads zero, remove regulator and pull cylinder out of tube
• Next, simply strip perforated section on the cylinder’s shrink wrap to reveal pre-paid return label
• Place empty cylinder back into the tube and place the black cap back on. The shipper will scan the bar code on the pre-paid shipping label.
• No paperwork to fill out!

Commonly Requested Gases

• Industrial Hygiene Gases
  • Ammonia, balance Air or Nitrogen
  • Carbon Dioxide, balance Air or Nitrogen
  • Carbon Monoxide, balance Air or Nitrogen
  • Chlorine, balance Nitrogen
  • Ethylene Oxide, balance Air or Nitrogen
  • Hydrogen Chloride, balance Nitrogen
  • Hydrogen Cyanide, balance Nitrogen
  • Hydrogen Sulfide, balance Air or Nitrogen
  • LEL% Methane, balance Air
  • LEL% Pentane, balance Air
  • LEL% Propane, balance Air
  • Nitrogen Dioxide, balance Air or Nitrogen
  • Nitric Oxide, balance Nitrogen
  • Sulfur Dioxide, balance Air or Nitrogen
  • Zero Air
  • Zero Nitrogen
• Environmental Gases
  • Benzene, balance Air or Nitrogen
  • Isobutylene, balance Air
  • Toluene
• Quad Gas Mix for Confined Space Entry
  • Hydrogen Sulfide, Carbon Monoxide, LEL (Methane/Propane/Pentane) and Oxygen deficiency, balance Nitrogen

Other gases available on request.

Product Video Reviews

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Downloads

PortaGreen Calibration Gas Literature PortaGas Mobile App Literature

In 2008, NFPA 1989 mandated an outside air analysis at least quarterly. With associated rules governing routine service, you may actually be required to test six times each year or more. You collect the air sample into the sterile container that we provide for you. (non-hazardous) The air is tested at a laboratory certified by the American Association for Laboratory Accreditation as required by NFPA. You will receive a certificate stating that you air meets the standards you requested. If your air does not pass, you are contacted personally to discuss the problem and another test can be sent out at once to you.

Features

• Recommended by NFPA 1500
• OSHA
• ANSI
• CGA
• NIOSH
• USN

Laboratory report will contain a breakdown of the levels of the following:

• Oxygen
• Carbon dioxide
• Odor
• Carbon monoxide
• Oil vapors (Hydrocarbons)
• Particulate matter

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Compressed Air Sample Kit, Low Pressure, Under 150 psi	NXATLP
Compressed Air Sample Kit, High Pressure, Over 150 psi	XAT1

For use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe. For use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe. The active ingredient is benzalkoium chloride. These pads will not harm even the most sensitive rubber facepieces. 5″ x 7″, 100 towelettes per box. The “Big Ones” are 8″ x 11″ and packaged 50 towelettes per box. A handy cleaning pad box for wall mounting is also available.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Alcohol Free Cleaning Pads	3001
Big Ones Cleaning Pads	3001-05
Cleaning Pad Box Holder	1001-02

Downloads

Alcohol Free Cleaning Pad literature

The Deluxe Storage Bag is made of durable polyester outer shell and fleece inside protects the mask from scratches. Added features include a breathable PVC mesh covering, drawstring closure and carrying strap designed to be used over the shoulder or for hand carry. Zippered inside and outside pockets allow extra storage for lens protectors and accessories. A hook is provided to hang the bag when stored and drain hole is at the base of the bag. A clear plastic window pouch for personal identification. 10″ in diameter.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Fleece Lined Bag	2025
Deluxe Fleece Lined Bag	2025-01

Downloads

Fleece Lined Storage Bag literature

Belt mounted for carrying respirators, gloves, goggles and small tools. Constructed of lightweight nylon reinforced vinyl fabric with Velcro closure to protect equipment from dust and moisture. Available in half mask and full mask sizes.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Half Mask Bag, 7″ x 4″ x 9″	2010
Full Mask Bag, 9″ x 7″ x 11″	2020

Single use disposable storage bags with gusset help prevent cross contamination of any personal safety equipment such as respirators or ear muffs. The large, 21″ x 11″ x 8″ bags come with pressure sensitive seals where cleaning information can be recorded. Packaged with 100 respirator cleaning labels in a reusable storage bag. Extra large bags are also available, 12″ x 8″ x 28″

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Disposable Respirator Storage Bags, pk/100	4001-05
XL Disposable Respirator Storage Bags, pk/50	4001-06

Downloads

Respirator Storage Bags literature

Reusable storage bags keep equipment contaminant free. These large, 14″ x 16″ transparent bag with zipper. These bags are made of tough 10 mil poly to last longer and hold half or full mask sizes. Cleaning instructions are printed on the bag.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Respirator Storage Bags	2000

For qualitative fit testing of air purifying respirators this Smoke Test Kit offers everything needed for meeting OSHA’s protocol for fit testing with smoke. When activated, Stannic Chloride is a white colorless gas with a pungent odor. It fumes strongly in moist air forming white hydrochloric acid fume. The emitted tin compound has a strong odor that will provoke an involuntary reaction (i.e. coughing) by the test subject. Each kit includes a vinyl protective pouch, hand operated air bulb, breaker tool, poly tubing, six smoke tubes with caps and instructions. Each container averages 3-5 fit tests per tube.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Standard Smoke Test Kit	2050
Replacement Tubes, pk/6	2050-01

Downloads

Smoke Test Kit literature

These kits offer a qualitative OSHA compliant fit test for disposable and reusable dust and mist respirators. These kits offer a qualitative OSHA compliant fit test for disposable and reusable dust and mist respirators. Bitrex creates an unmistakable bitter taste that indicates breakthrough on the respirator fit. New disposable glass ampules make pouring solution into nebulizers easier and reduce the change of contamination. The Saccharin Kit has a sweet taste to indicate failure on the respirator fit test. Each kit includes a test hood, sensitivity nebulizer, test nebulizer, 6 ampules of sensitivity solution, and 6 ampules of test solution.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Bitrex Test Kit	2041
Bitrex Sensitivity Solution, pk/6	2041-11K
Bitrex Test Solution, pk/6	2041-12K
Saccharin Fit Test Kit	2040
Saccharin Sensitivity Solution, pk/6	2040-11K
Saccharin Test Solution, pk/6	2040-12K

Downloads

Bitrex Fit Test Kit literature

Saccharin Fit Test Kit literature

This vest uses cooling inserts to keep the wearer comfortable. It is ideal for under HazMat suits and other protective clothing. This vest features 4 pockets for inserts and is available in 3 sizes. This vest features four pockets for inserts, zipper front and adjusts with Velcro over shoulder and side straps to help achieve a snug fit. Added comfort with 2 layers of 100% cotton. Inserts not included.

The Feather Ice Inserts freeze like ice buy stay cold up to three times as long. These reusable packs deliver a constant level of cold. They are lightweight, pliable powder to conform to your body when frozen. Non-toxic, 4 per package.

The Phase Change Insert is safe, non toxic PCM. Freeze in the refrigerator or ice water. Delivers a constant temperature of 58° for up to 3 hours. 6″ x 14″ and weighs just 16 ounces. 4 per package.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Standard Vest for Inserts, L	8413-03
Standard Vest for Inserts, XL	8413-04
Standard Vest for Inserts, XXL	8413-05
Feather Ice Inserts	8413-11
Phase Change Inserts	8414-11

Downloads

Vest with Inserts Datasheet

These vests are designed to protect and provide comfort to workers who must function in environments with excessive heat, including construction, firefighters, welders and factory workers. The standard cooling vest is lightweight and when soaked in water for 5 to 9 minutes and will provide all day cooling comfort. Snap closures allow for quick access. Available in royal blue and in 3 sizes. 100% cotton and hand washable.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Standard Cooling Vest, 34-44″	8401-03
Standard Cooling Vest, 46-48″	8401-04
Standard Cooling Vest, 50-52″	8401-05

Downloads

Cooling Cooling Vest Datasheet

Downloads

Allegro’s wall cases protect respirators against damaging plant and window environments. They are made of corrosion resistant ABS with ultraviolet inhibitors. Nonmetallic hinges and latches prevent rust while a rubber door seal protects equipment from dust and moisture. The Deluxe Case comes with a shelf and single SCBA cylinder bracket. The Standard Case offers the same large capacity without shelf or bracket. Size: 20″ w x 13″ d x 32.5″ h, 13 pounds.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Deluxe SCBA Wall Case	4100
Standard SCBA Wall Case	4101

Downloads

SCBA Case literature

The easiest way to meet your needs for portable air sources for up to three respirator users or two hood users. Available in explosion proof configurations for special applications. Applicable for chemical handling and clean-up. The A-1500EX meets Class I Div 1 & 2 Group D Class II Div 1 & 2 Groups F & G
*Warning: Ambient Air Pumps are not to be used with generators
**Warning: Air inlet to the pump must be located where breathable air can be assured at all times

Specifications

	A-1500 Pump	A-1500 EX Pump
Construction	Rigid metal base & housing, brass & galvanized steel plumbing, quick connect Rectus (OBAC) air fitting, adjustable brass pressure relief valve, powder coated gray, fan guard, pressure gauge 0-15 psi
Pump	Type: Oil-less, rotary vane, direct driven Vanes: Carbon construction (4 each replaceable), 3.5″ x 1.344″ x 0.188″ Filter: Inlet: 50.0 felt material Filter: Exhaust: 0.3 micron HEPA inline Working Pressure: 2-12 psi, 15 psi max Performance: 0-20 CFM @ 60 Hz Noise Level: At Pump: 95 dB, At 10′: 78 dB	Type: Oil-less, rotary vane, direct driven Vanes: Carbon construction (4 each replaceable), 3.5″ x 1.344″ x 0.188″ Filter: Inlet: 50.0 felt material Filter: Exhaust: 0.3 micron HEPA inline Working Pressure: 2-12 psi, 15 psi max Performance: 0-15 CFM @ 60 Hz Noise Level: At Pump: 95 dB, At 10′: 78 dB
Motor	HP: 1 ½ HP UL listed, CSA certified, TEFC continuous duty Volts: 115V/230 AC, Single Phase RPM: 1725 RPM NEMA Nom Eff: 75.0
	Cord: 8′ AWG 16/3 SJOOW 300V Neoprene med duty	Cord: 12′ AWG SJOOW-A 300V neoprene medium duty
Airline	100′ maximum from pump to respirator
Dimensions	24″ L x 10″ W x 16″ H, 97 pounds	27″ L x 10″ W x 15″ H, 122 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
A-1500TE Ambient Air Pump	9832
A-1500EX Ambient Air Pump, explosion proof	9833

Downloads

A1500 Pump literature

Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. A CO monitor is integrated to meet OSHA requirements for continuous monitoring of carbon monoxide levels. Each regulator can be individually adjusted at different pressure settings for different types of respirators and can also be used for supplying separate outlets for air tools. The CO monitor is integrated to meet OSHA requirements for continuous monitoring of carbon monoxide levels. This air filtration panel is housed in a portable, rugged Pelican case with carrying handles and latches for protection and security. There is an acrylic window to monitor the pressure gauges. Included is a 16 gauge, black powder coated steel stand for support.

Specifications

Construction	Pelican case with handle, acrylic window, black powder coated, 16 gauge steel stand, brass plumbing with quick-disconnects
CO Power Source	115 VAC to 9 VDC adapter, 9 VDC alkaline battery backup
CO Alarm Settings	10 ppm
External Connections	For optional remote strobe light alarm
Audible Alarm	90 dB
Visual Alarm	External power LED light signal
CO Sensor	Electrochemical
Display	Liquid crystal
Keys	Mode & Set
Modes	Normal operation, peak, battery charge & calibration mode
Calibration	Self adjusting calibration to 20 ppm CO
First Stage Filter	Zinc manifold, ABS cover, nylon bowl guard, polycarbonate bowl, 5 micron sintered polyethylene coalescing filter & automatic mechanical drain
Second Stage Filter	Zinc manifold, ABS cover, nylon bowl guard, polycarbonate bowl, 0.010 micron sintered polyethylene coalescing filter & automatic manual drain
Third Stage Filter	Zinc manifold, ABS cover, nylon bowl guard, polycarbonate bowl, 0.003 micron sintered polyethylene coalescing filter & automatic manual drain
Regulator	Individual, high pressure, zinc body, acetal adjusting knob, ABS cover, brass/nitrile valve with a 0-160 psi pressure gauge and an external relief valve set at 125 psi
Flow Meter	Clear acrylic, Teflon float with adjustable metering valve, graduations from 0.0-1.0 LPM
Dimensions	4 Worker: 21″ x 6.75″ x 14.5″, 21 pounds 6 Worker: 23″ x 7.5″ x 16.5″, 27 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Multi-Regulator Air Filtration Panel, 4 Worker	9874MR
Multi-Regulator Air Filtration Panel, 6 Worker	9876MR

Downloads

Multi-Regulator Air Filtration Panel literature

This Compressed Air Vortex Vest delivers constant and adjustable cooling and heating. The Vortex Vest is especially popular for workers in confined space as well as foundries, steel mills, asbestos abatement and paint baking operations. With no moving parts, the vortex tube forces a simple heat exchange to separate compressed air into hot and cold airstreams. The PVC vest delivers continuous cooled or heated air through its perforated, inner lining. This vest offers full range of motion and can be worn under protective clothing.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Vortex Vest with Plastic Cooler	8300
Vortex Vest only	8300-01
Vortex Vest only, 200+ pounds	8300-01L
Vortex Heater/Cooler with Metal Snap Tite Coupler	8300-90
Vortex Cooler with Plastic Snap Tite Coupler	8300-95
Vortex Heater with Plastic Snap Tite Coupler	8310-95
Vortex Cooler with Metal Snap Tite Coupler, 25 CFM	9991-25
50′ Air Source Hose	8400-50
100′ Air Source Hose	8400-100

Downloads

Compressed Air Vortex Vest datasheet

This Flame Retardant Low Profile Vortex Cooling Air Vest is designed for cooling personnel in circumstances where air conditioning is not feasible. The vest connects to any existing clean compressed air source. It’s patented engineered jets keep the wearer continuously cooled with refrigerated air. The airflow enhances the body’s natural evaporative cooling. The airflow additionally keeps the grit, dust and fibers out. One size fits 130-225 pounds. With no moving parts, the vortex tube spins filtered compressed air to separate it into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve producing a cold airstream.

Features

• Durable and rugged construction
• Breathable flame/heat retardant material
• Nylon belt keeps vest secure
• Can be worn under protective clothing
• Exchanges air seven times a minute
• Quiet operation
• Recommended for environments up to 120°F
• Will cool compressed air 25°F

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Flame Retardant Votrex Cooling Cooling Vest	8450
Air Source Hose 50′ with Snap Tite Coupler & Plug	8400-50
Air Source Hose, 100′ with Snap Tite Coupler & Plug	8400-100

Downloads

Vortex Flame Retardant Cooling Vest datasheet

Soak this Economy Poncho Cooling Vest in cold water for 10-15 minutes for all day cooling. This vest is inexpensive and easy to put on. The vest is reversible so you can easily refresh the cooling process by turning the vest inside out. 1 size fits most.

Features

• Outside fabric is 100% cotton
• Inside vest has cooling crystals
• Sectionalized for better cooling distribution
• Nylon side straps with quick buckle closures
• Hi-Viz orange color
• Weight: 7 ounces

Avoid contact with salt water, gasoline, alcohol or other chemicals as these may damage the cooling crystals and may cause skin irritation.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Economy Poncho Cooling Vest	8402

Downloads

Datasheet

A low cost and portable means of cooling breathing air while keeping workers comfortable and productive for hours. This system is capable of reducing the air temperature from 180° F to as low as 50° F. The cooling system is connected to a high pressure breathing source, such as a filtration panel, cascade system or compressor, not to exceed 150 psi, through a 5′ long inlet supply airline using a heavy duty Hansen coupler. Air flowing through the FDA Grade PVC temperature cooling coil inside the 70 quart cooler reduces the air temperature by having ice poured onto and around the coil. Coils are separated to allow ice to surround hose. The outlet air is filtered at the end of the coil line by a 5 micron particulate air filter, which removes condensation that may build up in the hose. The pressure regulator includes a pressure gauge and adjustable knob with locking ring. Single outlet coupler can adapt to 3-Worker Manifold. Transportation is made easy with durable wheels and a locking telescoping pull handle. NOTE: panel sold separately, Dimensions: 20″w x 21″l x 24″h, Weight: 28 lbs. (without ice)

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
High Pressure Allegroair Airline Cooling System	9820-HP
Low Pressure Allegroair Airline Cooling System	9820-LP

Downloads

AllegroAir Airline Cooling System Literature

The new Allegro Air Filtration Panel Cart filters impurities and hydrocarbons from an air compressor to convert to breathable air. All components are housed in a portable and rugged Pelican case mounted on a powder-coated steel cart w/ telescopic handle for ease of storage and shipping. To meet OSHA requirements an optional CO monitor is available for continuous monitoring of carbon monoxide levels.

Features

• Components housed in a portable, rugged Pelican case mounted on a powder coated steel cart with telescopic handle
• All brass plumbing with quick disconnect Hansen couplers
• U-bracket for lifting

Specifications

Panel	Max Flow	Max Inlet	Dimensions	Weight
4 Worker Cart	60 CFM	125 psig	48.5″ x 13.5″ x 26″	56 pounds
8 Worker Cart	100 CFM	125 psig	48.5″ x 13.5″ x s6″	59 pounds

Specifications-General

Construction	Housed in a portable, rugged Pelican case with carrying handle, 16 gauge powder coated steel, all brass plumbing with Hansen couplers
CO Monitor	Power: 115V AC to 9V DC power adapter for continuous power supply, 9V DC Alkaline battery as back up Alarm Setting: 10 ppm Ext Connections: Optional remote strobe alarm Audible: 90 dB Piezo alarm Sensor: Electrochemical, replaceable Display: LCD Keys: Mode & Set Calibration: self adjusting calibration to 20 ppm
Filtration System	5 micron particulate filter element and automatic mechanical drain Second Stage: 0.010 micron coalescing filter & manual drain Third Stage: 0.003 micro activated carbon filter & manual drain Regulator: High pressure, adjusting pressure knob Flow Meter: Adjustable metering valve, range 0.0 – 1.0 LPM

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Four Worker Cart	9874-EFC
Eight Worker Cart	9878-EFC

Downloads

Air Filtration Panel Cart Datasheet

The easy to order, easy to use Complete Ventilation Systems include all the most requested equipment you need for your confined space site. The systems include a choice of our most popular blowers, 6′ & 15′ of ducting with a storage bag, and a Manhole Ventilation Passthru (MVP). The Axial AC & DC Metal Blower Systems offer lightweight portability with the highest output available from axial style blowers.

Allegro has a new CFM Blower Selector available at the App store for iPhone & Android phones.

The AC blower is designed with tough steel construction, a durable grill, convenient carrying handle and rubber feet. Its small profile means easy storage. It is Certified CSA STD C22.2 No. 113. The air delivery is certified CEESI.

The DC blower is perfect for locations where electricity is not available because it can be operated off a truck battery. It features a 12 volt DC electric motor with thermal protector and single speed performance. It includes a 15′ cord with alligator clips.

Features

• Epxoy powder coated in safety orange
• Flange on intake side for optional inlet adapter
• 18 gauge cold rolled steel housing
• Welded motor mount construction
• Carry handle made of 3 ply rubber belting
• Steel/chrome plated grill

Specifications

Type	AC Blower	DC Blower
Free Air	1275	1150
One 90° Bend	661	800
Two 90° Bends	582	650
Weight	19 lbs	18 lbs
HP	1/3	1/4
Power	3.0A/120V AC	22A/12V DC

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
DC Axial Blower System	9520-06M
AC Axial Blower System	9520-14M

Downloads

AC Axial Blower Sheet

DC Axial Blower Datasheet

This Point of Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. The POA is housed in a portable, rugged Pelican case with carrying handles and latches for protection and security. It can also be wall mounted. Each POA includes an adjustable pressure regulator, pressure gauge and a brass spring-loaded pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure in 150 psi. Dimensions: 12″ x 10″ x 5″

Specifications

Relief Valve	Pop-Safety, brass material, spring loaded (external)
Maximum Temperature	150°F
Maximum Pressure	300 psi
Flow Capacity	82 scfm
Inlet Fittings	½” quick connect steel Hansen plug
Outlet Fittings	¼” quick connect brass Hansen coupler
Manifold	Zinc
Adjusting Knob	Acetal
Body Cap	ABS
Valve	Balanced valve design, brass/nitrile
Diaphragm	Spring loaded, nitrile/zinc
Pressure Gauge	Analog, CBM, 0-160 psi, 1 ½” dial face

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Point of Attachment Air Control System	9871-03
Economy Point of Attachment Air Control System, no Pelican Case	9871-03EC

Downloads

Point of Attachment Air Control literature

This pump is designed to be used outside the contaminated work environment to bring clean, breathable air into supplied air respirator or hood. This pump offers a low cost air source when a compressor is not available. It is portable, and oil-less, producing no carbon monoxide, oil vapor or oil mist, thus eliminating the need for carbon monoxide monitoring and alarm system. The A-750 is ideal for a super portable, lightweight air source for a single or two respirator users. Sold performance in applications of one worker painting, cleaning, sanding or chemical handling operations. For two respirators or one hood.

Specifications

Construction	Rigid metal base & housing, brass * galvanized steel plumbing, quick connect Rectus (OBAC) air fitting, adjustable brass pressure relief valve, Steel handle, powder coated blue
Pump	Type: Oil-less, rotary vane Vanes: Carbon construction (4 each replaceable), 2″ x 1.5″ x 0.219″ Filter: Inlet: 50.0 felt material with metal grid inlet filter housing Filter: Exhaust: 0.3 micron HEPA inline Pressure Gauge: 1 ½” face, 0-15 psi, steel housing Working Pressure: 2-12 psi, 15 psi maximum Performance: 0-10 CFM @ 60 Hz, 0-8 CFM @ 50 Hz Noise Level: At Pump: 90 dB, At 10′: 72 dB
Motor	HP: ¾ HP UL listed, CSA certified Volts: 115V/230 AC, Single Phase RPM: 1725 RPM @ 60 Hz/1425 RPM @ 50 Hz Currant Draw: 115V, 12A @ 60 Hz/12.2-14A@ 50 Hz Cord: 10′ AWG 16/3 SJ OOW 300 V with integrated on/off Switch Plug: Integrated NEMA 5-15
Airline	100′ maximum from pump to respirator
Dimensions	16″ L x 9″ W x 13″ H, 53 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
A-750 Ambient Air Pump	9821

Downloads

A-750 Ambient Air Pump literature

This pump is designed to be used outside the contaminated work environment to bring clean, breathable air into supplied air respirator or hood. This pump offers a low cost air source when a compressor is not available. It is portable, and oil-less, producing no carbon monoxide, oil vapor or oil mist, thus eliminating the need for carbon monoxide monitoring and alarm system. The A-300 is ideal for a super portable, lightweight air source for a single respirator user. Sold performance in applications of one worker painting, cleaning, sanding or chemical handling operations.

Specifications

Construction	Rigid metal base & housing, brass plumbing, quick connect Rectus (OBAC) air fitting, adjustable brass pressure relief valve, powder coated blue
Pump	Type: Oil-less, rotary vane Vanes: Carbon construction (4 each replaceable), 1.25″ x 1.5″ x 0.125″ Filter: Inlet: 40.0 micron bronze/steel Filter: Exhaust: 0.3 micron HEPA inline Pressure Gauge: 1 ½” face, 0-15 psi, steel housing Working Pressure: 2-12 psi, 15 psi maximum Noise Level: At Pump: 90 dB, At 10′: 72 dB
Motor	HP: ¼Volts: 115V/230 VAC, Single Phase Hertz: 60/50 UL Listed, CSA certified RPM: 1725 RPM @ 60 Hz/1425 RPM @ 50 Hz Currant Draw: 115V, 4.6A @ 60 Hz/ 4.8-5.0A @ 50 Hz Cord: 6.5′ AWG 16/3 SJOOW with integrated On/Off Switch Plug: Integrated NEMA 5-15
Airline	100′ maximum from pump to respirator
Dimensions	15″ L x 9″ W x 13″ H, 33 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
A-300 Pump	9806

Downloads

A-300 Pump literature

The complete kit offers a portable, lightweight air source for one, two or three workers. They are offered with one, two or three comfortable half mask supplied air respirators, a ¼ hp ambient air pump, ¾ hp pump or 1 ½ hp pump and 50 or 100 feet of breathing hose. This comfortable half mask offers low pressure continuous flow protection with the same unique over the shoulder hose and belt as the full face mask. It’s durable and easy to use and clean. The low profile design allows it to fit under welding shields.

The mask seal is durable silicone rubber maintains shape while in storage, hypoallergenic and chemical/ozone resistant and comfortable even in extreme heat and cold environments.

The down tube and belt assembly have a 90° elbow allows it to be directed over the shoulder and out of the way and is made of a corrugated material for flexibility.

NIOSH approved.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
One Worker Half Mask SAR w/ 50′ Hose, ¼ hp Pump	9205-01
One Worker Half Mask SAR w/ 100′ Hose, ¼ hp Pump	9215-01
Two Worker Half Mask SAR w/ 50′ Hose, ¾ hp Pump	9205-02
Two Worker Half Mask SAR w/ 100′ Hose, ¾ hp Pump	9215-02
Three Worker Half Mask SAR w/ 50′ Hose, 1½ hp Pump	9205-03
Three Worker Half Mask SAR w/ 100′ Hose, 1½ hp Pump	9215-03
Low Pressure Half Mask Supplied Air Respirator Assembly	9920

Downloads

Half Mask SAR Datasheet

The full face mask supplied air system provides a portable air source for one, two or three respirator users. They include one, two or three full mask supplied air respirators, a ¼ hp ambient air pump, ¾ hp pump or 1½ hp pump and 50 or 100 foot of breathing air hose. This comfortable full mask offers low pressure continuous flow protection with a unique over the should hose design and an adjustable belt holds the hose out of the way. It is durable and easy to use and clean.The mask is made of silicone rubber for durability and will hold its shape even in extreme heat or cold. It features a double sealing flange and deep chin pocket to provide an improved face to mask seal with a much improved and more comfortable fit. The lens is replaceable polycarbonate and offers a wider, distortion free viewing area with an anti-fog anti-scratch coating. The removable hairnet means greater comfort and fits easily under a hardhat. The low pressure unit includes and OBAC quick connect fitting while the high pressure includes a large diameter contoured exhalation valve. The down tube & belt assembly feature a 90° elbow that allows it to be directed over the shoulder and out of the way, and is corrugated flexible and lightweight material for greater comfort and less fatigue. NIOSH Approved TC-19C-353, use only Allegro hose.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
One Worker Full Mask SAR w/ 50′ Hose, ¼ hp Pump	9200-01
One Worker Full Mask SAR w/ 100′ Hose, ¼ hp Pump	9210-01
Two Worker Full Mask SAR w/ 50′ Hose, ¾ hp Pump	9200-02
Two Worker Full Mask SAR w/ 100′ Hose, ¾ hp Pump	9210-02
Three Worker Full Mask SAR w/ 50′ Hose, 1 ½ hp Pump	9200-03
Three Worker Full Mask SAR w/ 100′ Hose, 1 ½ hp Pump	9210-03
Full Mask Assembly	9901
Full Mask Supplied Air Respirator with Personal Air Cooler	9902-C
Full Mask Supplied Air Respirator with Flow Control Valve	9902-CV
Full Mask Supplied Air Respirator with Temperature Controller	9902-HC
Lens Covers, pk/25	9901-25

Downloads

Full Mask Supplied Air System Datasheet

In areas such as painting or asbestos abatement, where levels of contamination are low, these complete SAR systems offer a portable air source for one or two workers. Especially comfortable for bearded workers, the hood style SAR is lightweight and loose fitting, to fit comfortably over the head. A large clear window offers a wide view and complete protection in dirty environments such as spray painting or asbestos abatement. The convenient disposable design is perfect where respirator cleaning or decontamination if difficult. They include disposable, lightweight, loose fitting DuPont Tyvek hoods, a ¾ hp pump or 1 ½ hp pump and 50 or 100 foot of breathing air hose. NIOSH approval number TC-19C-331.

The lens is a clear 15 mil co-polyester (PETG) with a distortion free panoramic view 6″ x 12″. The suspension is a disposable one piece assembly and includes an absorbent foam headband. The adjustable Velcro closure head harness secures hood in place.

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
One Worker Tyvek SAR with/ 50′ Hose	9220-01
One Worker Tyvek SAR with 100′ Hose	9230-01
Two Worker Tyvek SAR with 50′ Hose	9220-02
Two Worker Tyvek SAR with 100′ Hose	9230-02
Complete Tyvek Respirator Hood Assembly	9910
Replacement Hoot with Suspension, downtube not included	9910-10

Downloads

Series Tyvek Hood Systems LP Datasheet

Allegro’s Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3 stage filtration system purifies compressed air removing water, oil and particulate contaminates. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).

The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. The Carry Air AC/DC powered unit is housed in a rugged Pelican case for portability and protection. It includes a support stand for stability and up right operation. An AC/DC powered Wall-mount unit is also available. Available with and without CO monitors. All models meet NIOSH requirements for point of attachment.

Specifications

Panel	Max Flow	Max Inlet	Dimensions	Weight
1 Worker Carry-Air	15 CFM	150 psig	16″ x 13″ x 7″	11 pounds
2 Worker Carry-Air	30 CFM	150 psig	18″ x 12″ x 6″	14 pounds
5 Worker Carry-Air	60 CFM	150 psig	21″ x 14.5″ x 6.75″	19 pounds
8 Worker Carry-Air	100 CFM	150 psig	23″ x 16.5″ x 7.5″	25 pounds

Specifications-General

Construction	Housed in a portable, rugged Pelican case with carrying handle, 16 gauge powder coated steel, all brass plumbing with Hansen couplers
CO Monitor	Power: 115V AC to 9V DC power adapter for continuous power supply, 9V DC Alkaline battery as back up Alarm Setting: 10 ppm Ext Connections: Optional remote strobe alarm Audible: 90 dB Piezo alarm Sensor: Electrochemical, replaceable Display: LCD Keys: Mode & Set Calibration: self adjusting calibration to 20 ppm
Filtration System	5 micron particulate filter element and automatic mechanical drain Second Stage: 0.010 micron coalescing filter & manual drain Third Stage: 0.003 micro activated carbon filter & manual drain Regulator: High pressure, adjusting pressure knob Flow Meter: Adjustable metering valve, range 0.0 – 1.0 LPM

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
One Worker Carry Air with Carbon Monoxide Monitor	9873
Two Worker Carry Air with Carbon Monoxide Monitor	9872
Two Worker Carry Air without Carbon Monoxide Monitor	9872-W/O
Five Worker Carry Air with Carbon Monoxide Monitor	9875
Five Worker Carry Air without Carbon Monoxide Monitor	9875-W/O
Eight Worker Carry Air with Carbon Monoxide Monitor	9878
Eight Worker Carry Air without Carbon Monoxide Monitor	9878-W/O

Downloads

1 Worker Carry-Air literature

Allegro’s Wall-Air Filtration Panel convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3 stage filtration system purifies compressed air removing water, oil and particulate contaminates. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada). The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. An AC/DC powered Wall-mount unit is also available. Available with and without CO monitors. All models meet NIOSH requirements for point of attachment.

Specifications

Panel	Max Flow	Max Inlet	Dimensions	Weight
1 Worker Wall-Air	15 CFM	150 psig	21.25″ x 8.25″ x 7.75″	11 pounds
2 Worker Wall-Air	30 CFM	150 psig	21.25″ x 8.25″ x 7.75″	11 pounds
5 Worker Wall-Air	60 CFM	150 psig	22″ x 8.5″ x7.5″	15 pounds
8 Worker Wall-Air	100 CFM	150 psig	25″ x 14″ x 7″	21 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
One Worker Wall-Air with Carbon Monoxide Monitor	9873-40
Two Worker Wall-Air with Carbon Monoxide Monitor	9872-40
Two Worker Wall-Air without Carbon Monoxide Monitor	9872-40W/O
Five Worker Wall-Air with Carbon Monoxide Monitor	9875-40
Five Worker Wall-Air without Carbon Monoxide Monitor	9875-40W/O
Eight Worker Wall-Air with Carbon Monoxide Monitor	9878-40
Eight Worker Wall-Air without Carbon Monoxide Monitor	9878-40W/O

Downloads

Wall-Air Filtration Panel literature

The Remote CO Alarm System is attached to any air source or filter panel and alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm. This remote alarm system can be connected up to the filtration panel by means of a 50′ cable that plugs into the filtration panel. This allows the user to keep the CO Alarm closer to their working areas assuring them of being warned if the CO levels exceed 10 ppm. The alarm consists of both a loud 90 dB alarm and a highly visible red strobe light. Also available with a strobe.

Features

• Housed in a portable, rugged Pelican case with a carrying handle and latches for protection and security
• Can be operated in AC or DC modes
• Uses a single 9 Volt battery
• Maximum regulator pressure is 150 psig
• Coupling pigtail and kit included for fast and easy adaptation to an existing air filtration system
• All brass plumbing with quick disconnect ¼” plug

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
Remote CO Alarm for Carry-Air or Wall-Air Panel	9871-02
Remote CO Alarm with Strobe for Carry-Air or Wall-Air Panel	9871-01
Economy Remote CO Alarm with Strobe (Smaller Size)	9871-01EC

Downloads

CO Alarm literature

The 9533 COM-PAX-IAL AC Blower Series Blowers you have come to love and rely on just got better! The already industry leading compact design is now even more compact. These blowers have been shortened from 32″ to 26″ while decreasing the weight by 8 pounds. The Axial an easy to use complete ventilation system. It includes all the most asked for equipment you need for your confined space site. Allegro has a blower app available from the App store. This versatile system features the 8″ COM-PAX-IAL blower with canister and your choice of 15′ or 25′ of ducting. This lightweight unit is designed with the quick connect clipping system which allows workers to attach the canister, tools free, to the input side for powerful extraction or output side for ventilation. The 15′ or 25′ ducting stores conveniently within the canister. Special design features include blower and canister built in carry handles, built in on/off switch and safety orange coloration.

Features

• Shortest & lightest canister with ducting on the market
• Shortened canister still holds 15′ or 25′ of ducting
• Made from single-ply, PVC coated vinyl and polyester materials
• Temperature resistant up to 180°F
• Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs

Specifications

Type	AC Blower	DC Blower
Free Air	831 CFM	816 CFM
One 90° Bend	709 CFM	526 CFM
Two 90° Bends	586 CFM	442 CFM
Weight with 15′ Ducting	25 lbs	33 lbs
HP	1/3	¼
Power	3A/115V AC	25A/12V DC

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
AC COM-PAX-IAL Blower with 15′ Ducting	9533-15
AC COM-PAX-IAL Blower with 25′ Ducting	9533-25
DC COM-PAX-IAL Blower with 15′ Ducting	9536-15
DC COM-PAX-IAL Blower with 25′ Ducting	9536-25

Downloads

AC Com Pax Ial Blower DC Com-Pax-Ial Plastic Blower

The ATI PortaSens II has been updated to the PortaSens III portable gas leak detector. The new PortaSens III is a rugged hand held device used to detect leaks of toxic or otherwise dangerous gas and also to detect oxygen displacement. The D16 quickly adapts to measure different gases by inserting the appropriate gas sensor module which retains all of the calibration and configuration settings for the target gas. An internal pump with a flexible wand is included for point sampling around suspect pipe fittings and confined spaces. Readings and settings are presented on a backlighted, resistive touch, color graphics LCD with a beeper to notify you of alarms and other events. Readings are recorded in .csv files (ASCII text, comma-separated values) and transferred to a PC using the supplied USB cable. No external application is required. The files may be opened with any text editor or directly by applications like Microsoft Excel. Power is provided from a rechargeable NiMH D-cell battery. The battery should be removed and charged in an external charger after each use. The battery is not used or even required when the device is connected to a USB port. The inlet port, located on the manifold lid, is fitted with a quick disconnect fitting to connect the flexible want. The wand can be used for probing closely around pipes and fittings and for sampled confined spaces without entering. The wand is lined with Teflon and is inert to nearly all vapors and gases. Flexible tubing may be connected to the inlet port to sample high gas concentration or those beyond the reach of the wand. Fluorocarbon based tubing is strongly recommended for measuring low concentrations of reactive gases. Other materials may be used for high range measurements where the adsorption of gas by the tubing is negligible or where you are probing or significant leaks. The internal walls of the wand and any inlet tubing must be kept dry. Water on the walls may absorb soluble gases and decrease the gas readings, presenting an unsafe condition. If the inside of the wand or tubing gets wet, dry dry air through it for 10-15 minutes.

Features

• Interchangeable smart sensors for over 30 gases
• Internal sample pump and external sampling wand
• One hand pistol grip design
• Easy to read back lit color graphics, LCD
• Instantaneous and timed sampling modes of operation
• Visual and audible alarms
• Internal datalogger with RS-232 output

Specifications

Range	Dependent on gas, see chart below
Display	Backlighted, resistive touch sensitive 320 x 240 color graphics LCD with an anti-glare overlay.
Accuracy	±5% of value, sensor dependent
Sensitivity	1% of sensor module range
Repeatability	±1% of lowest sensor module range
Sampling Pump	Internal diaphragm pump, 400cc/min, adjustable, long life, variable speed, DC motor
Alarms	Three level alarms, configurable for high or low operation or disabled Trouble, low battery, restricted flow alarms Alarm indications on LCD and beeper
Data Logger	Internal 4Gb, selectable sampling intervals from 10 seconds to 60 minutes
Sample/Measure	Self timed sample/measure mode for repeatable readings
Real Time Clock	Battery backed, accurate to about 1 minute per year
Input/Output	USB 2.0 MDS Class interface with 1 m mini-USB cable
Power	D-cell battery, rechargeable, NiMH, external charger required 10-12 hours of continuous use Alkaline D-Cell battery USB connection provides power, but does not charge battery
Operating Temperature	-25° to 55°C
Size	3.5″ W x 9″ H x 5.5″ D
Weight	7 pounds

Ordering Information

The PortaSens III is supplied in a padded carrying case for easy storage and transport. Space is provided for an extra battery plus up to two sensor keepers, which means up to 8 extra sensors ready for immediate use. Each PortaSens III includes the detector, spare filters, 10″ Teflon lined sampling wand, flowmeter, USB cable, spare NIMH “D” cell battery, sensor keeper and calibration”T” fitting. The basic PortaSens III detector does not include sensor modules. Because the PortaSens III is designed to accept any gas sensor, you can select one or more sensor modules. Each sensor module is factory calibrated for the minimum and maximum ranges indicated. The standard factory calibration for the module is listed below. Please choose the sensor below. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description	Catalog No.
Model C16-1 PortaSens III, 120 VAC Charger	00-1876
Charger	28-0039

Sensor Specifications & Ordering Information

Gas	Range	Resolution	Factory Calibration	Part No.
Acetic Acid	0-100/500 ppm	–	100 ppm	00-1045
Acid Gases	0-10/200 ppm	0.1 ppm	20 ppm	00-1038
Acetylene	0-200/2,000 ppm	1 ppm	500 ppm	00-1057
Alcohol	0-50/500 ppm	1 ppm	200 ppm	00-1043
	0-500/2,000 ppm	1 ppm	2,000 ppm	00-1044
Ammonia	0-50/500 ppm	1 ppm	200 ppm	00-1010
	0-500/2,000 ppm	1 ppm	1,000 ppm	00-1011
Arsine	0-500/2,000 ppb	1 ppb	1,000 ppb	00-1024
	0-10/200 ppm	0.1 ppm	10 ppm	00-1025
Bromine	0-1/5 ppm	0.01 ppm	2 ppm	00-1000
	0-5/100	0.1 ppm	20 ppm	00-1001
Carbon Dioxide-IR	0-0.2/1.5% ppm	1 ppm	200 ppm	00-1012
Carbon Monoxide	0-50/1,000 ppm	1 ppm	200 ppm	00-1012
Chlorine	0-1/5 ppm	0.01 ppm	2 ppm	00-1002
	0-5/100 ppm	0.1 ppm	20 ppm	00-1003
Chlorine Dioxide	0-1/5 ppm	0.01 ppm	2 ppm	00-1004
	0-1/5 ppm	–	Low Cl2 Response	00-1425
	0-5/200 ppm	0.1 ppm	20 ppm	00-1005
	0-200/1,000 ppm	0.1 ppm	1,000 ppm	00-1359
Diborane	0-500/2,000 ppb	1 ppb	1,000 ppb	00-1026
	0-10/200 ppm	0.1 ppm	10 ppm	00-1027
Dimethyl-amine (DMA)	0-100/200 ppm	–	100 ppm	00-1450
Ethylene Oxide	0-20/200 ppm	0.1 ppm	20 ppm	00-1039
Fluorine	0-1/5 ppm	0.01 ppm	2 ppm	00-1006
	0-5/100 ppm	0.1 ppm	20 ppm	00-1007
Formaldehyde	0-20/200 ppm	0.1 ppm	20 ppm	00-1040
	0-500/2,000 ppm	1 ppm	1,000 ppm	00-1349
Germane	0-500/2,000 ppb	1 ppb	1,000 ppb	00-1028
	0-10/200 ppm	0.1 ppm	10 ppm	00-1029
Hydrogen	0-1/10%	0.01%	4%	00-1013
	0-500/2,000 ppm	1 ppm	2,000 ppm	00-1041
Hydrogen Bromide	0-10/200 ppm	–	20 ppm	00-1455
Hydrogen Chloride	0-10/200 ppm	0.1 ppm	20 ppm	00-1017
Hydrogen Cyanide	0-10/200 ppm	0.1 ppm	20 ppm	00-1018
Hydrogen Fluoride	0-10/200 ppm	0.1 ppm	20 ppm	00-1019
Hydrogen Peroxide	0-200/2,000 ppm	0.1 ppm	1,000 ppm	00-1169
	0-10/100 ppm	0.1 ppm	20 ppm	00-1042
Hydrogen Selenide	0-500/2,000 ppb	1 ppb	1,000 ppb	00-1030
	0-10/200 ppm	0.1 ppm	10 ppm	00-1031
Hydrogen Sulfide	0-10/200 ppm	0.1 ppm	50 ppm	00-1020
	0-200/1,000 ppm	–	500 ppm	00-1469
Iodine	0-1/5 ppm	0.01 ppm	2 ppm	00-1036
	0-5/100 ppm	0.1 ppm	20 ppm	00-1037
Nitrogen Dioxide	0-10/200 ppm	0.1 ppm	20 ppm	00-1022
Nitric Oxide	0-50/500 ppm	1 ppm	200 ppm	00-1021
NOX	0-50/500 ppm	0.1 ppm	200 ppm	00-1181
Oxygen	0-5/25%	0.1%	25%	00-1014
Ozone	0-1/5 ppm	0.01 ppm	2 ppm	00-1008
	0-500/2,000 ppb	–	1,000 ppb	00-1163
	0-5/200 ppm	0.1 ppm	20 ppm	00-1009
	0-200/1,000 ppm	0.1 ppm	1,000 ppm	00-1358
Phosgene	0-1/5 ppm	0.01 ppm	2 ppm	00-1015
	0-5/100 ppm	0.1 ppm	100 ppm	00-1016
Phosphine	0-500/2,000 ppb	1 ppb	1,000 ppb	00-1032
	0-10/200 ppm	0.1 ppm	10 ppm	00-1033
	0-200/2,000 ppm	1 ppm	1,000 ppm	00-1034
Silane	0-10/200 ppm	0.1 ppm	10 ppm	00-1035
Sulfur Dioxide	0-10/500 ppm	0.1 ppm	20 ppm	00-1023
Combustible IR	0-20/100%	–	–	00-1883

Downloads

PortaSens 3 Literature

ATI’s Series D12 gas transmitter product line has been expanded. Now available in this versatile package is an LEL transmitter utilizing an Infrared sensor that resists the poisoning problems inherent in catalytic bead sensors. The D12-IR utilizes a compact IR sensor in a corrosion resistant housing with sintered flame arrestor to meet hazardous area classification requirements and is suitable for most plant environments.

The D12-IR gas transmitter eliminates the poisoning problems inherent in catalytic bead sensors. While catalytic LEL sensors offer reliable service, the presence of silicon vapors, hydrogen sulfide and halogenated hydrocarbons can quickly degrade sensor performance. Infrared sensing technology is not susceptible to these potential interferants which means greater measurement stability and longer sensor life.

The D12-IR transmitter can also be configured with Infrared sensor for carbon dioxide (CO₂) or nitrous oxide (N₂0) detection. All sensor versions can operate in diffusion mode for ambient air or with a flow cell for pumped samples.

The D12-IR is available in four configurations:

•  For measurement and data transmission to remote display and alarm equipment, the D12-IR operates in 3 wire mode. Integral LCD indicates gas concentration as well as alarm conditions
• Transmitter with HART for plants operating with HART protocol communications systems, the D12-IR can be supplied with this option. The HART output supports both 4-20 mA and constant current mode of operation.
• Transmitter with integral relays for systems requiring local alarm functions or systems where discrete outputs are desired, the D12-IR can provide 3 relay outputs. Relays are assignable to any alarm setpoint or fault condition and are fully programmable for setpoint, hysteresis and time delay.
• When RS-485 communication is desirable, D12-IR transmitters with alarm relays can be supplied with a Modbus interface. software supports up to 247 unique addresses for large system use.

Features

•  Infrared sensing element is protected inside a stainless steel assembly with a sintered stainless steel flame arrestor.
• Because the IR sensor is always in an active state, the transmitter continuously monitors critical sensor functions and indicates any sensor problems both on the display and through the analog output.
• D12-IR transmitters can be factory calibrated for volumetric methane measurements in special applications. Ranges from 0-10%, to 0-100% by volume are available. A separate sensor is also available for high percent level measurements of heavier hydrocarbons such a butane and propane.
• Each time a sensor is zeroed or spanned the data is stored in memory. Calibration history can be recalled and sensor condition reviewed by operating personnel when necessary.
• Optional relays outputs can be used for local alarm functions. All relays are programmable for setpoint, hysteresis, on-delay, off-delay and other variables. Even a remote reset feature is provided for in the transmitter design.
• Transmitter analog output can be set to user definable values. This provides for complete loop testing without the need to apply gas to the sensor
• Alarm relays may be activated on command to allow testing of local alarm devices. Any combination of relays may be activated based on operator selection. Output and alarms may also be inhibited for maintenance and calibration.
•  The transmitter is available with either HART or MODBUS protocol. The HART protocol supports the HART Universal and Common Practice Commands at 1200 baud using the Bell 202 FSK modem standard. The MODBUS protocol supports 9600 baud access to concentration and status information and supports alarm setup and many other functions on either RS485 or RS232 (software selectable). Comes with a register/tag database on a 3 1/2″ diskette.
• Gas concentrations are displayed in large, easy to read numbers. The display also provides alarm indication and complete menus for setting up operating parameters. A back light is available.
•  Measured gas values are stored at user definable intervals and can be recalled when needed on the LCD display. Data can be downloaded using an MODBUS interface.
• Each time a sensor is zeroed or calibrated, the data is stored in memory. Calibration history can be recalled and sensor condition reviewed by operating personnel whenever necessary.
• Operating functions such as calibration, alarm setup, alarm reset, data view and setup options are all available using a magnetic tool. It is never necessary to open the enclosure when making adjustments.
•  Program settings stored in the transmitter may be protected by a user selectable password. Operators may still review all function, but changes may only be made by authorized personnel.
• Transmitter analog output can be set to user definable values and relay outputs can be set to specific states for complete simulation of detection system operation. Output and alarms may also be inhibited for maintenance and calibration.
• The D12 electronic assembly plus easily into a terminal board in the base of the enclosure. Transmitters can be easily removed for wiring and quickly replaced in the event of a fault condition.
• Transmitters are designed for operation in hazardous areas. The cast aluminum housing for the D12 transmitter is rated for Class 1, Division 1 Group B, C, D locations and is UL, FM and CSA certified.

Specifications

Sensor Type	Single path non dispersive infrared
Sensor Separation	Maximum 25′ cable from sensor to transmitter
Range	Combustible Gas: 0-50% LEL min, 0-100% max Volumetric Methane: 0-10% min, 0-100% max Carbon Dioxide: 0-2,000 ppm, 0-50% max Nitrous Oxide: 0-2,000 ppm, 0-1% max
Accuracy	+/-5% of value, but limited by available calibration gas accuracy
Gases Available	Combustible gas, carbon dioxide or volumetric methane. Combustible gas selectable for methane, propane or butane Consult factory for other gases and vapors.
Response Time	T90 < 10 seconds
Electronic Repeatability	± 1%
Electronic Linearity	± 0.5%
Zero Drift	Less than 1% of full scale per month, non cumulative
Span Drift	Dependent on operating environment but generally less than 1% per month
Serial Interface	Hart (1200 baud modem interface) MODBUS (1200-9600 – RS232 or RS485 s/w selectable)
Optional Alarm Relays	Three SPST, 5 A @ 230 VAC resistive
Relay Coil	Programmable either normally energized or normally de energized
Analog Output	Powered at 4-20mA, 675 ohms maximum at 24 VDC
Power	12-30 VDC, 350 mA maximum (3W average)
Temperature Limits	-40 to 75°C
Controls	4 magnetic switches on front of transmitter
Enclosure	Class 1 Div 1, Groups B, C & D
Weight	4 pounds

Ordering Information

Many other combinations available, for pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description	Catalog No.
D12 Gas Transmitter for Combustibles, 0-100% by Volume, no relays	D12-IR-1-1-1
D12 Gas Transmitter for High Hydrocarbons 100% by Volume, no relays	D12-IR-1-2-1
D12 Gas Transmitter for CO2, 0-2000 ppm or 0-5% by Volume, no relays	D12-IR-1-3-1
D12 Gas Transmitter for CO2, 0-5% or 0-50% by Volume, no relays	D12-IR-1-4-1

Downloads

D12-IR literature

The Series F12 Gas Transmitter is an Intrinsically Safe (IS) version of ATI’s explosion proof D12 transmitter. In its standard form, it is designed for detection of a variety of toxic gases in hazardous area applications requiring IS devices. In addition, it is also well suited for all general purpose applications where toxic gas measurement is required. For IS installations, this transmitter is also available with a Hart communication option.

F12 Transmitter use ATI’s standard smart sensors for maximum flexibility. Sensors are easily exchanged and contain all calibration constants in sensor memory, eliminating the need for field calibration of transmitters. Sensors may be calibrated on the bench and then simply plugged into the transmitter. Calibration data is read into the transmitter automatically and no other adjustments are normally required. For general purpose gas detection applications, the F12 transmitter is also available in Non-IS versions. One version provides for easy interface to RS-485 networks using a standard MODBUS communication protocol. A second version provides a complete AC powered instrument with 3 alarm relays (SPST) available for external alarming.

Features

• Transmitter are designed for use in application requiring intrinsically safe devices for safety purposes.
• Every transmitter will accept up to 45 different sensor modules, greatly reducing the need for multiple transmitter models.
• Gas generators permanently installed on the sensor verify sensor operation by providing a bump test of the sensor from daily to once a week.
• Plug in sensors store calibration data, allowing sensors to be calibrated separately from the transmitter. This allows bench calibration (or factory calibration) of sensors to reduce the necessity for carrying calibration gas around the plant.
•  A non-IS version of the transmitter provides 3 integral alarm relays. Relays and programmable for setpoint, hysteresis, on-delay and other variables. Systems with alarms are available for operation from 12-30 VDC supplies or from 115 or 230 VAC power.
• The IS version of the transmitter is available with Hart communications. The Hart protocol supports the Hart Universal and Common Practice Commands at 1200 baud using the Bell 202 FSK modem standard. The non-IS versions of the transmitter are available with MODBUS communications. The MODBUS protocol supports 9600 baud access to concentration and status information and supports alarm setup and many other functions.
• Gas concentrations are displayed in large, easy to read numbers. The display also provides alarm indication and complete menus for setting up operating parameters.
•  Measured gas values are stored at user designable intervals and can be recalled when needed on the LCD display. Data can be downloaded using a Hart or MODBUS interface.
• Each time a sensor is zeroed or calibrated, the data is stored in memory. Calibration history can be recalled and sensor condition reviewed by operating personnel whenever necessary.
• Operating functions such as calibration, alarm setup, alarm reset, data view and setup options are all available using sealed front panel switches on the face of the Nema 4X transmitter enclosure.
• For use in applications where condensation is a problem, this heater option keeps the sensor above the whew point to eliminate loss of sensitivity due to moisture blockage on the sensor face.
• Transmitter analog output can be set to user definable values and relay outputs can be set to specific states for complete simulation of detection system operation. Output and alarms may also be inhibited for maintenance and calibration.

Sensor Specifications

Gas	Range	Factory Calibration
Acid Gases*	0-10/200 ppm	20 ppm
Acetylene	0-200/2,000 ppm	0-500 ppm
Alcohol	0-50/500 ppm	200 ppm
	0-500/2,000 ppm	2,000 ppm
Ammonia*	0-50/500 ppm	200 ppm
	0-500/2,000 ppm	1,000 ppm
Arsine	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Bromine*	0-1/5 ppm	2 ppm
	0-5/100	20 ppm
Carbon Monoxide*	0-50/1,000 ppm	200 ppm
Chlorine*	0-1/5 ppm	2 ppm
	0-5/100 ppm	20 ppm
Chlorine Dioxide*	0-1/5 ppm	2 ppm
	0-1/5 ppm	Low Cl2 Response
	0-5/100 ppm	20 ppm
	0-200/1,000 ppm	1,000 ppm
Diborane	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Dimethyl Amine*	0-100/200 ppm	100 ppm
Ethylene Oxide*	0-20/200 ppm	20 ppm
Fluorine*	0-1/5 ppm	2 ppm
	0-5/100 ppm	20 ppm
Formaldehyde*	0-20/200 ppm	20 ppm
	0-500/2,000 ppm	1,000 ppm
Germane	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Hydrogen	0-1/10%	4%
	0-500/2,000 ppm	2,000 ppm
Hydrogen Bromide*	0-10/200 ppm	20 ppm
HC Sensor	Specify Gas	–
Hydrogen Chloride*	0-10/200 ppm	20 ppm
Hydrogen Cyanide*	0-10/200 ppm	20 ppm
Hydrogen Fluoride*	0-10/200 ppm	20 ppm
Hydrogen Peroxide*	0-10/100 ppm	20 ppm
	0-200/2,000 ppm	1,000 ppm
Hydrogen Selenide	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Hydrogen Sulfide*	0-10/200 ppm	50 ppm
Iodine*	0-1/5 ppm	2 ppm
	0-5/100 ppm	20 ppm
Nitrogen Dioxide*	0-10/200 ppm	20 ppm
Nitric Oxide	0-50/500 ppm	200 ppm
NOx	0-50/500 ppm	200 ppm
Oxygen	0-5/25%	25%
Ozone*	0-1/5 ppm	2 ppm
	0-5/100 ppm	20 ppm
	0-200/1,000 ppm	1,000 ppm
Phosgene	0-1/5 ppm	2 ppm
	0-5/100 ppm	100 ppm
Phosphine	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
	0-200/2,000 ppm	1,000 ppm
Silane	0-10/200 ppm	10 ppm
Sulfur Dioxide*	0-10/500 ppm	20 ppm

(*) Indicates Auto-Test available

Specifications

Range	User adjustable within limits of selected sensor module
Response Time	Sensor dependent
Accuracy	Generally ±10% of value, but limited by available calibration gas accuracy
Electronic Repeatability	±1% of full scale
Electronic Linearity	±0.5% of full scale
Zero Drift	Less than 2% of full scale per month, non-cumulative
Span Drift	Application dependent, but generally less than 3% per month
Alarm Relay Option	Three SPST 5A@ 230 VAC resistive
Analog Output	Loop powered 4-20 mA, 800 ohms maximum at 24 VDC (except combustible gas)
Serial Interface	HART (1200 baud modem interface), MODBUS (1200-9600 – RS-232 or RD-485, software selectable)
Power	12-30 VDC, 25 mA maximum in loop powered mode 12-30 VDC, 200 mA maximum in 3-wire mode 115 or 230 VAC, 50/60 Hz
Alarm Relays	Three SPDT, 5A@230 VAC resistive
Relay Coil	Programmable either normally energized or normally de-energized
Enclosure	Explosion proof Class 1, Div 1, Groups B, C, D or NEMA 4X
Sensor Type	Electrochemical for toxic gases and oxygen
Controls	4 magnetic switches on front of transmitter
Temperature	-30° to + 60°C for toxics, -10°C minimum for oxygen sensor
Heated Sensor Power	24 VDC connection, 250 mA

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Downloads

F12 literature

GasSens is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. Economical and low maintenance, this system is your best choice for reliable leak detection. GasSens detection systems consist of individual modules that can be located where required. Sensor/transmitters located in the area where gas leakage or buildup might occur, provide the basic measurement for the system. Sensor transmitters are available in either NEMA 4X or explosion-proof versions and can be supplied with ATI’s exclusive Auto-Test automatic sensor testing system. Receiver modules provide the electronic brains for the detection and alarm system. Each compact module includes a digital display of gas concentration, isolated analog output, and 4 relay outputs. Receivers may be located up to 1,000 feet from sensor/transmitters for remote indication or can provide local control functions such as valve shut off while transmitting a 4-20 mA signal to remote displays or dataloggers. Receiver modules provide an interface between the detection system and external alarming and data logging requirements. One module is used with each sensor/transmitter.

Features

• The LED display Indicates gas concentration directly in ppm, ppb or %. The display may be operated in high intensity mode for outdoor use or in normal mode for indoor application
• An isolated 4-20 mA output is standard. The output will drive loads up to 1,000 ohms for use in recording, data logging or computer input.
• Two alarm setpoints are factory adjusted to standard values but may be set to any value from 5% to 100% of range. Front panel LED’s marked Warning and Alarm indicate the status of each alarm setpoint. A standard alarm time delay of 2 seconds or a longer delay of 10 seconds may be selected. In addition, alarms may be switch programmed to activate either above or below the setpoint.
• Three alarm output relays are SPDT with unpowered contacts for use in activating external signaling devices, control elements or for input to telemetry or annunciator systems. Each relay may be assigned to either alarm setpoint for application flexibility. Relays are factory set to energize on alarm, but may be switch programmed for fail safe operation. Relays may be also set either latching or non-latching operation.
• Trouble alarm & relay should the sensor/transmitter input be lost, a trouble light (LED) on the front panel will flash and an associated relay will activate. For those systems equipped with the Sensor Auto-Test feature, this alarm will also activate if the sensor does not respond to the automated gas test.
•  A single front panel switch marked A/R serves a number of functions. When an alarm occurs, the switch will silence an audible horn wired to the module and will change the alarm lights from flash to steady on. After the alarm condition has cleared, the switch will also activate an electronic module test, inhibit alarm contacts and activate the sensor Auto-Test.
• Terminals are provided for connection of a remote reset switch so that alarms can be acknowledged form a remote location or through a telemetry system.
• External electrical connections are made to plug in terminal blocks. Should module service ever be needed, modules can be replaced in minutes.

GasSens gas detection systems employ electrochemical sensors developed and manufactured by ATI. Expertise in electrochemistry and sensor design provide the foundation for leak detection systems that perform continuously with minimal maintenance. Sensors are rated for ambient temperature from -25 to 50ºC, allowing both indoor and outdoor applications. Excellent zero stability and high sensitivity and selectivity combine to make ATI sensors the best available. Gas sensors are closely coupled to a digital transmitter for excellent noise immunity and the ability to transmit long distances using unshielded cable. The transmitter is powered from the receiver module and uses a unique current pulse position technique to send information to the receiver over a two wire connection. The receiver connection in not polarity sensitive, virtually eliminating the possibility of incorrect transmitter wiring. Sensor/transmitters can be located up to 1,000 feet from receiver modules. Sensor/transmitters are housed in shielded NEMA 4X enclosures for use in almost any industrial environment and are designed to meet intrinsic safety standards. An explosion proof version is available.

Auto-Test – Savings & Safety

A major expense in gas detection systems is the cost of regular testing to ensure that sensors are responding. This requires a technician to inspect sensors weekly and apply a small amount of gas manually to check response. ATI has developed a unique system to reduce this maintenance requirement. Available on most ATI digital sensor/transmitters is an option called “Auto-Test.” This option consists of an electrochemical gas generator closely coupled to the sensor. Every 24 hours, the receiver automatically activates the generator, producing a small amount of gas that diffuses into the sensor, just as it would if a gas leak occurred. The microcomputer is the receiver analyzes the output of the transmitter to determine that the sensor is responding normally. When proper sensor response is detected, the generator is turned off and the system goes back to normal operation. If no sensor response is detected, the TROUBLE light on the receiver will flash and the trouble relay will activate. During testing, alarm relays are inhibited so that external alarms are not activated. The Auto-Test feature ensures that each sensor is regularly tested with gas. Premature sensor failure or blockage of the sensor membrane is quickly detected. In addition, self-testing will alert maintenance personnel when a sensor has reached the end of its useful life. Since sensors normally last anywhere from 12 months to over 3 years, this feature allows users to determine when sensor replacement is needed.

Power Supply Module

A compact universal power supply in a DIN rail module similar to the receiver was developed. The power supply will accept any AC or DC input from 85 to 225 volts, without adjustment. Other options include a battery back up system and horn and strobe light options.

Specifications

Concentration Display	4 Digit LED, sunlight readable
Input	Digital signal, 2 wire connection to remote sensor/transmitter
Output	Isolated 4-20 mA or 0-20 mA DC, 1,000 ohms maximum load
Alarms	Two adjustable concentration alarms, setpoints adjustable form 5-100% of range
Alarm Indicators	High intensity LED bars for Warning (low setpoint) and Alarm (high setpoint)
Indicator Function	Warning indicator non-latching, alarm latching
Alarm Relays	Three assignable alarm relays, 10 A, 120 VAC (5A, 250 VAC) resistive alarm relays assignable to either alarm setpoint
Relay Function	Configurable for normal/fail-safe, latching/non-latching and fast/slow operation
Relay & Indicator Reset	Activated from front panel switch or through remote reset
Trouble Alarm	Front panel LED indicator and SPDT, 10 A 120 VAC (5A, 250 VAC) resistive relay; Relay factory set to fail-safe operation
Trouble Function	Indicates loss of sensor/transmitter input or failure of sensor Auto-Test (if in use)
Gas Indicator	LED bar on front panel with gas symbol overlay
Mounting	Module mounts to 35 x 7.5 mm DIN rail
Electrical Connection	Quick disconnect plug-in terminal blocks
Module Enclosure	Noryl
Power	9-15 VDC, 30 mA maximum

Sensor Specifications

Gas	Range	Factory Calibration
Acid Gases*	0-10/200 ppm	20 ppm
Acetylene*	0-50/500 ppm	0-200 ppm
Alcohol	0-50/500 ppm	200 ppm
	0-500/2,000 ppm	2,000 ppm
Ammonia*	0-50/500 ppm	100 ppm
	0-500/2,000 ppm	1,000 ppm
Arsine	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Bromine*	0-1/5 ppm	2 ppm
	0-5/200	20 ppm
Carbon Monoxide*	0-50/1,000 ppm	100 ppm
Chlorine*	0-1/5 ppm	2 ppm
	0-5/200 ppm	20 ppm
Chlorine Dioxide*	0-1/5 ppm	2 ppm
	0-1/5 ppm	Low Cl2 Response
	0-5/200 ppm	20 ppm
	0-200/1,000 ppm	1,000 ppm
Diborane	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Dimethyl Amine (DMA)	0-100/200 ppm	100 ppm
Ethylene Oxide*	0-20/200 ppm	20 ppm
Fluorine*	0-1/5 ppm	2 ppm
	0-5/200 ppm	20 ppm
Formaldehyde*	0-20/200 ppm	20 ppm
	0-500/2,000 ppm	1,000 ppm
Germane	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Hydrogen	0-1/10%	4%
	0-500/2,000 ppm	2,000 ppm
Hydrogen Chloride*	0-10/200 ppm	20 ppm
Hydrogen Cyanide*	0-10/200 ppm	20 ppm
Hydrogen Fluoride*	0-10/200 ppm	20 ppm
Hydrogen Peroxide*	0-10/100 ppm	20 ppm
	0-200/0-2,000 ppm	1,000 ppm
Hydrogen Selenide	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
Hydrogen Sulfide*	0-10/200 ppm	50 ppm
	0-200/1,000 ppm	–
Iodine*	0-1/5 ppm	2 ppm
	0-5/200 ppm	20 ppm
Nitrogen Dioxide*	0-10/200 ppm	20 ppm
Nitric Oxide	0-50/500 ppm	200 ppm
NOx	0-50/500 ppm	200 ppm
Oxygen	0-5/25%	25%
Ozone*	0-1/5 ppm	2 ppm
	0-5/200 ppm	20 ppm
	0-200/1,000 ppm	1,000 ppm
Phosgene	0-1/5 ppm	2 ppm
	0-5/100 ppm	100 ppm
Phosphine	0-500/2,000 ppb	1,000 ppb
	0-10/200 ppm	10 ppm
	0-200/2,000 ppm	1,000 ppm
Silane	0-10/200 ppm	10 ppm
	0-500/2,000 ppb	1,000 ppb
Sulfur Dioxide*	0-10/500 ppm	20 ppm

Note: * Indicates sensors available with Auto-Test feature.

Sensor/Transmitter Specifications

Measurement	Gas type and range customer specified
Transmitter Type	Two wire system, current pulse operation signal
Sensor	Electrochemical gas diffusion type
Accuracy	Generally +/-5% of value, but limited by available calibration of gas accuracy
Zero Drift	Sensor dependent but normally less than 2% per month, non-cumulative
Enclosure	NEMA 4X polystyrene
Optional Enclosure	Explosion proof cast aluminum, Class I, Div 1, Gps B, C & D
Electrical Connection	Quick disconnect terminal blocks (two wires without polarity)
Connection Distance	Up to 1,000 feet to receiver
Option	Sensor Auto-Test
Power	12 VDC from receiver module

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Downloads

GasSens Literature Tags: Acetylene gas detector, Alcohol gas detector, Ammonia gas detector, Arsine gas detector, Bromine gas detector, Carbon Monoxide gas detector, Chlorine gas detector, Chlorine Dioxide gas detector, Diborane gas detector, Dimethyl Amine (DMA) gas detector, Ethylene Oxide gas detector, Fluorine gas detector, Formaldehyde gas detector, Germane gas detector, Hydrogen gas detector, Hydrogen Chloride gas detector, Hydrogen Cyanide gas detector, Hydrogen Fluoride gas detector, Hydrogen Peroxide gas detector, Hydrogen Selenide gas detector, Hydrogen Sulfide gas detector, Iodine gas detector, Nitrogen Dioxide gas detector, Nitric Oxide gas detector, NOx gas detector, Oxygen gas detector, Ozone gas detector, Phosgene gas detector, Phosphine gas detector, Silane gas detector, Sulfur Dioxide gas detector

Monitoring combustible or toxic gases in areas with condensing levels of moisture often results in premature sensor failure. Water condensing on sensor surfaces or within the sensor flame arrestor can be difficult to avoid due to widely variable ambient conditions. ATI has developed a solution to this problem with a gas sampling system that also conditions the sample by removing water vapor. The Dri-Gas sampling system draws gas samples from high humidity vent stacks, ducts, wet wells or other humid locations. The system removes water vapor from the gas sample by contact with a cold plate that condenses moisture and delivers a dehumidified gas sample suitable for toxic and combustible gas monitoring equipment. Excess condensate is pumped to a drain fitting on the bottom of the enclosure and can be collected if necessary.

Dri-Gas systems contain a diaphragm sampling pump with brushless DC motor providing operational life in excess of 10,000 hours. The pump is capable of pulling inlet line vacuum of up to 10″ Hg. making it suitable for sampling duct systems with negative pressures. The outlet of the pump is controlled by an adjustable rotameter allowing system sample flow to be set to the normal ate of 500 cc/min. A differential pressure switch across the pump provides an alarm should the inlet line or outlet lines become blocked. An alarm lamp on the door provides local alarm indication and a SPDT alarm contact is available for remote alarm indication.

An optional inlet filter assembly is available for applications where gas streams may contain dust or debris that might cause problems in the air pump. A replaceable filter element on the end of the inlet assembly can be easily changed when necessary.

A plugged inlet filter will be indicated by a fault indication. A package of filter elements are supplied with the inlet assembly.

Features

• Condensing water vapor removed continuously
• Sample from ducts under vacuum
• Gas sensor “blinding” eliminated
• Virtually maintenance free
• Options for 120 VAC or 230 VAC operation

Installation

The gas sampling system is suitable for either indoor or outdoor installation, but outdoor installations must be protected from wind driven rain. It is also best to protect it from direct sunlight to minimize solar heating or the interior. Outlet tubing containing the dried air sample should be connected directly to the gas sensor flowcells and distances should be kept as short as possible. Teflon lined PVC sample inlet and outlet tubing is recommended to minimize loss of reactive gases.

The diagram below shows a typical installation with the output to an F12 transmitter. This is an example only. The dried gas sample can be fed to a variety of gas sensors including ATI’s D12, D12IT, B12, F12 or other manufacturers.

Specifications

Power	120 VAC, 50/60Hz, 230 VAC Optional, 35VA Maximum
Pump	6VDC powered diaphragm type, brushless motor rated 10,000 hours
Flowrate	Adjustable, 300-800 cc/min, 500cc recommended
Inlet	Push to connect fitting for ¼” od tubing
Outlet	Push to connect fitting ¼” od tubing
Sample Pump Rating	Maximum 10″ Hg vacuum on inlet Maximum 4 psig pressure on outlet
Alarms	Low flow alarm lamp on front door, SPDT alarm relay for low flow remote indications
Enclosure	NEMA 12 /IP-52 Polycarbonate, Flammability V-0
Temperature	Operating: 2-45°C
Storage	-25 to 55°C
Size	15″ W x 17″ H x 9″ D
Weight	18 pounds
Accessories	2 replacement peristaltic pump tubes 2 replacement fan/inlet grill filters
Options	Inlet filter assembly with package of 10 replacement inlet filters

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description	Catalog No.
C21 Dri-Gas Sampling System, 120 VAC without inlet filter	C21-1-1
C21 Dri-Gas Sampling System, 120 VAC with inlet filter	C21-1-2
Fuse,2A, Slo-Blow	23-0002
Replacement Fan/Inlet Grill Filter, pk/6	36-0063
Peristaltic Pump Tubing Kit, pk/10	05-0116

Downloads

C21 Dri-Gas Sampling System literature

Many safety programs require response testing of the portable detectors used for personal monitoring, prior to use. Fixed detectors must also be tested to ensure they remain sensitive to the target gas.

Regulator “puff tests” can provide a quick check of sensor response. These involve briefly exposing the gas sensors to a puff of air containing a small amount of the target gas. This is often done quite effectively using cylinder gas from calibration cylinders. However, the high cost of the cylinder gas can make this test fairly expensive. What’s more, compressed gas cylinder can be difficult to transport, creating possible supply problems for users.

The A24 Puffer is a portable, battery operated instrument containing a gas generator and simple hand pump that provides the puff of air needed for sensor response checks.

For puff testing diffusion gas detectors, the Puffer includes a short outlet tube. Gas is ejected from the generator by pressing the bladder on the front of the unit. For testing detectors with internal sampling pumps, a plug on the unit is removed so that the sampling pump can pull air through the generator cell for delivery to the detector.

Puffers are water resistant for use in any environment and are designed to intrinsic safety standards. Generator cells provide hundreds of tests, with an LED to indicate the remaining life of the generator cell. Generator cells are easily changed and the life indicator can be reset when a new generator is installed.

Puffer units are available for testing the following gas sensors:

• Chlorine
• Hydrogen Sulfide
• Ammonia

Specifications

Power	9 VDC Alkaline battery
Generator	Electrochemical
Generator Life	1000 Cycles for Chlorine, 350 cycles for other gases
Pump	Manual bladder
Display	Single digit LED
Outlet Tube	6″ polyethylene
Enclosure	Nema 4X, IP-66
Size	4.7″ x 3.2″ x 2.4″
Weight	0.7 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com. Each Puffer bump test generator is supplied with a specific gas generator cell factory installed. Spare generator cells may be ordered separately. Spare generators should be stored in a refrigerator in the sealed container in which they are shipped.

Description	Catalog No.
Puffer for Chlorine	00-1397
Chlorine Generator Cell	00-1433
Puffer for Hydrogen Sulfide	00-1398
Hydrogen Sulfide Generator Cell	00-1436
Puffer for Ammonia	00-1399
Ammonia Generator Cell	00-1434

Downloads

Puffer Bump Test Literature

When you have got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW CLip4 four gas detector. Wearablw, easy multi gas detection that is always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality. Once activated you can rest assured that the Honeywell BW Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

The BW Clip4 is a 4 gas monitor with sensors to detect combustible gases, oxygen, hydrogen sulfide and carbon monoxide.

Features

• Durable, ergonomic and wearable
• Compact profile even working in tight spaces, you will not know you are wearing it
• Simple one button operation
• User friendly tamper proof operation
• Intuitive LCD icons
• Real time gas concentrations shown on LCD
• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self test of sensors, battery status, circuit integrity and audible/visual alarms
• Compatible with the IntelliDoX docking system and instrument management system
• Built in concussion proof boot
• Tested to last in extreme environments

Specifications

Sensors	Electrochemical sensors:CO, H2S, O2 IR: LEL
Alarms	Visual, vibrating, audible (95dB) Low, High
Self Test	Activated detectors automatically perform one internal diagnostic test every 24 hours
Battery Life	Two years
Operating Temperature	-4 – 131ºF
Ratings	IP 66/67
Intrinsic Ratings	UL: Class I, Division 1, Groups A, B, C, D, Class I, Zone 0, Gr. IIC ATEX: CE Ex II 1 G T4, Ga IP66/67 IECEX: Ex ia IIC T4 Ga IP 66/67 CE: European Conformity
Warranty	Two years from activation (given normal operation)
Size	4.7″ x 2.7″ x 1.3″
Weight	8.2 ounces

Sensor Specifications

Sensor	Range	Resolution
Hydrogen Sulfide (H2S)	0 – 100 ppm	1 ppm
Carbon Monoxide (CO)	0 – 1,000 ppm	1 ppm
Oxygen (O2)	0-25%	0.1%
Combustible Gases	0-100% LEL	1%

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description	Catalog No.
BW Clip4, Black	BWC4-B-N
BW CLip4, Yellow	BWC4-Y-N
Neck Strap with Safety Release	GA-NS-1
Short Strap	GA-LY-1
Chest Harness	GA-CH-2
Manual Aspirator Pump Kit	D4-AS01

Downloads

Honeywell BWClip4 Literature

The Honeywell BW Ultra is a portable 5 gas detector designed specifically for sampling and monitoring confined spaces, before and after entry. Honeywell BW Ultra offers unmatched sensor technology, visibility on gas readings, comfort and connectivity. This makes it the most reliable and user friendly way to prevent a safety incident. When you are sampling gases in a confined space, you need to constantly watch the reading on your gas detector and the Honeywell BW Ultra makes them easy to see. The detector has a 3.2″ screen and very high resolution, so you can quickly determine the level of each gas. It stands up to harsh condition. With a very high rating of IP66/68 the Honeywell BW Ultra is protected not only from dust but also from water ingress (high pressure spray or submersion up to 3.9′). So if you drop the Ultra in a vat or take it into a dust prone environmental, you can fell completely confident that is will continue to operate. Unlike gas detectors that you wear, the Ultra is a detector that you hold as you sample the air in a confined space. That is why we designed the Ultra to fit the shape of your hand with a comfortable weight and a slimmer profile than other 5 gas detectors to prevent fatigue and increase productivity. Plus it has 1 button operation. The Honeywell BW Ultra simultaneously detects the 4 gases you are required to monitor in confined spaces: oxygen, hydrogen sulfide, carbon monoxide and combustibles at the LEL. plus there is a 5th sensor for the gas of your choice, ranging from sulfur dioxide to chlorine to volatile organic compounds (VOCs). Honeywell BW Ultra is compatible with the Honeywell Safety Communicator mobile app, which means that vital gas readings on the detector are no longer limited to the confined space attendant who is using it. The detector’s gas readings and location can be instantly sent via Bluetooth to Honewell’s real time monitoring software, viewable from a control room or other remote locations. The Ultra features “Hole Watch Mode” which shows the concentration of each gas plus a graph next to every reading that shows how close the gas is to the point of alarm. You can see how fast each gas level is climbing, so you can correct small problems before they cause worker injury, evacuation or complete shutdown. The Ultra uses the new 1-Sensor technology with small size. These sensors deliver consistently accurate readings, standing up to temperatures from -40 to 60°C. The 1-Series sensors last up to 5 years, depending on their gas exposure. With that long sensor life, backed by a 3 year warranty on the Ultra you can have confidence in your detector performance while reducing your cost of ownership. Honeywell’s TouchConnect Technology brings Bluetooth technology to gas detection users. Simply activate your Bluetooth TouchConnect device and it will allow you to change a number of ultra devices that are within range. It will allow you to configurations or send units in to a quick Bump or Calibration mode.

Features

• The largest, most easy to view screen in the market
• Enhanced situational awareness for the hole watch
• The new 1-Series sensor for maximum reliability
• TouchConnect Technology for quicker instrument management
• Remote monitoring for an additional layer of protection
• Tamper proof operation with one button operation
• Hole Watch Mode or quick decision making
• IntelliFlash and also Reverse IntelliFlash for clear compliance

Specifications

Ingress Protection	IP66/68
Alarms	Visual, vibrating, audible (95dB) Low, High, STEL, TWA, OL (over limit)
Self Test	Activated detectors automatically perform one internal diagnostic test every 24 hours
Pump	Sample from up to 75′
User Options	Adjust STEL period (5-15 minutes in 1 minute intervals) Calibration span levels Calibration interval Bump Test Interval LEL & PID correction factors Calibration due date Individual sensor enable/disable Latching alarms Stealth mode
Connected Worker	Bluetooth Low Energy (BLE) Honeywell TouchConnect
Operating Temperature	-4 – 131ºF
Ratings	EMI/RFI: Complies EMC Directive 89/336/EEC IP 65/66
Intrinsic Ratings	UL: Class I, Division 1, Groups A, B, C, D, Class I, Zone O, Group IIC
Warranty	Instrument: 3 Years Sensors: 3 Years (2 years for ammonia, 1 year for PID & chlorine) Battery: 2 Years
Size	5.8″ x 3.3″ x 1.6″
Weight	14.5 ounces

Sensor Specifications

Sensor	Range	Resolution (Default)
Hydrogen Sulfide (H2S)	0 – 100 ppm	1.0 ppm
Carbon Monoxide	0 – 2,00 ppm	1 ppm
Carbon Monoxide (Low Hydrogen)	0-1,000 ppm	1.0 ppm
Carbon Dioxide	0-50,000 ppm	100 ppm
Oxygen (O2)	0-25%	0.1%
Sulfur Dioxide (SO2)	0-100 ppm	0.1 ppm
Nitric Oxide	0-200 ppm	1.0 ppm
Ammonia (NH3)	0-100 ppm	1.0 ppm
Nitrogen Dioxide (NO2)	0-50 ppm	0.1 ppm
Hydrogen Cyanide (HCN)	0-100 ppm	0.1 ppm
Chlorine (Cl2)	0-20.0 ppm	0.1 ppm
Hydrogen	0-2,000 ppm	5 ppm
PID (VOCs)	0-1,000 ppm	1 ppm
Combustible Gases (LEL)	0-100% Vol	1% LEL
Combustible Gases (IR)	0-5.00% Vol	0.01% Vol

Ordering Information

Other configuration and calibration gases are available, please contact us for pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description	Catalog No.
Honeywell BW Ultra 5 Gas Detector with O2, H2S, CO, LEL, PID sensors, internal pump, battery & charger	HU-X1W1M1Q1-B-N
Honeywell BW Ultra 5 Gas Detector with O2, H2S, CO, LEL, IR Carbon Dioxide sensors, internal pump, battery & charger	HU-X1W1H1M1B1-B-N
Honeywell BW Ultra 5 Gas Detector with O2, H2S, CO, LEL, Sulfur Dioxide sensors, internal pump, battery & charger	HU-X1W1H1M1S1-B-N
Honeywell BW Ultra 5 Gas Detector with O2, H2S, CO, LEL, Ammonia sensors, internal pump, battery & charger	HU-X1W1H1M1A1-B-N
Honeywell BW Ultra 5 Gas Detector with O2, H2S, CO, LEL, Chlorine sensors, internal pump, battery & charger	HU-X1W1H1M1C1-B-N
Honeywell BW Ultra Deluxe Confined Space Kit	HU-CK-DL
Rubber Boot	HU-BOOT
Carrying Case	HU-CK-CC

Downloads

BW Ultra Quick Refernce Guide Honeywell BW Ultra Datasheet BW Ultra Brochure