You are here:

Tango TX1 Single Gas Detector

The Tango TX1 Single gas detector features a two-year runtime and patented DualSense® Technology to increase worker safety, regardless of bump test frequency, while reducing overall costs.

Contact AFC for quantity discounts.

$312.00$488.00

Description

Description

The Tango TX1 Single gas detector features a two-year runtime and patented DualSense® Technology to increase worker safety, regardless of bump test frequency, while reducing overall costs. This technology uses redundant sensors to determine the concentration of the target gas in the atmosphere and reduce the risk of monitor failure. Gas detected include carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide and a carbon monoxide sensor hydrogen compensated.

Stay better protected with DualSense. This technology uses redundant sensors to determine the concentration of the target gas in the atmosphere and reduce the risk of monitor failure.

Tags: CO Carbon Monoxide Gas Detector, H2S Hydrogen Sulfide Gas Detector, NO2 Nitrogen Dioxide Gas Detector, O2 Oxygen Gas Detector, SO2 Sulfur Dioxide Gas Detector

Features

  • The Tango TX1 uses DualSense Technology to increase worker safety by eliminating the risk of sensor failure.
  • Get the most accurate gas readings using redundant sensor technology to detect the same gas type.
  • Stop worrying about repairing or replacing equipment with the industry’s only Guaranteed for Life™ warranty.
  • Acknowledges gas alerts
  • Increase audible alarms to 110 dB with optional AlarmAmp™.

Specifications

Sensors 5 electrochemical sensors
Battery 3.6 V primary lithium-thionyl chloride battery, 1.5AH, 2/3AA, replaceable, non rechargeable
Operating Hours Always on, up to 2 years fo run-time depending on operating conditions
Display Segment LCD
Event Logging 60 alarms events
Datalogging 3 months at 10 second intervals
Case Material Top: Polycarbonate with a protective rubber overmold
Bottom: Conductive polycarbonate
Alarm 3 strobe emitting visual alarm LEDs (two red, one blue)
100 dB audible alarm at 10cm
Vibration alarm
Temperature -40 to 122°F**
Humidity 15% to 95% relative humidity (non-condensing)
Intrinsic Safety ATEX: ex ia IMa; Ex ia IIC T5, Category: I m1/II 1 G
CSA: CI U, Gr A-D, T4; Ex ia IIC T4
IECX: Ex ia I Ma; Ex ia IIC T4 Ga
UL: CI I, Gr A-d, T4; CI II Gr E-G, CI I, Zone D, AEx ia IIC T4
Size 3.9″ X 2.0″ x 1.4″
Weight 4.4 ounces
Warranty Guaranteed for Life, Warranted for as long as the instrument is supported by ISC.
CO & H2S sensors: 3 years
All other sensors: 2 years

** Operating temperatures above 122°F may cause reduced instrument accuracy. Operating temperatures below -4°F may cause reduced instrument accuracy and affect display and alarm performance

Sensor Specifications

Sensor
Range
Resolution
Carbon Monoxide (CO)
0 – 1,000 ppm
1 ppm
Carbon Monoxide, H2 Compensated (CO)  0 – 500 ppm 1 ppm
Hydrogen Sulfide (H2S)  0 – 500 ppm  0.1 ppm
Nitrogen Dioxide (NO2)  0 – 150.0 ppm  0.1 ppm
Sulfur Dioxide (SO2)  0 – 150.0 ppm  0.1 ppm

Downloads

Tango TX1 Single Gas Detector Specifications

Product Enquiry

Customers Also Purchase

You may also like…