Scanning Moisture Meter
This scanning Moisture Meter accurately reads elevated moisture content using cutting edge electromagnetic wave technology that penetrates 1/4″ through most materials.
Prices start at $150.00
For pricing, please call 1-800-952-3293 or email firstname.lastname@example.org
This scanning Moisture Meter accurately reads elevated moisture content using cutting edge electromagnetic wave technology that penetrates 1/4″ through most materials. Materials include all soft and hard woods including pine, poplar, oak, maple or teak and all forms of drywall and sheetrock and greenboard. This meter is not appropriate for testing concrete, brick or mortar. Our meter is non-destructive, leaves no marks and automatically calibrates to dry air. The probe can be held at any angle and reads 0 to 100% moisture in wood and drywall for building inspection, lumber, water damage repair and other industries. The large LCD simultaneously displays current, maximum and minimum moisture content, has a bright backlight and a low battery indicator. Each meter features adjustable audible and visible, Hi/Lo, wetness risk alarm, auto power off and a hold function. Each unit comes ready to use with clear instructions and 3 AAA batteries. 9.5″ x 2.5″ x 1″, 8 ounces
|Materials||All soft and hard woods, including pine, poplar, oak, maple, teak
All forms of drywall and sheetrock including 1/4″ and 1/2″ gypsum drywall, soundboard and greenboard
|Operating Temperature||0 to 40°C|
|Humidity||Less than 85%|
|Reading Depth Range||6 to 40mm|
|Power Supply||3 AAA Batteries|
|Battery Life||200 hours without backlight
50 hours with backlight constantly on
PLEASE NOTE: This meter is not appropriate for testing concrete, brick, mortar or screed
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email email@example.com.
|Scanning Moisture Meter||