IntelliDoX Docking Station Automated Management System

The IntelliDox Docking Station combines smart docking modules and device management software to provide automated instrument management for compatible detectors, helping you drive productivity, reliability and efficiency.

IntelliDoX is easy to install, taking under 2 minutes from setup of a five module dock to the bump of your first instrument. Each module has its own operating system, LCD screen and internal pump allowing you to perform more than one operation at the same time. Whether you want to bump three detectors or calibrate others – you can get more done in less time. Configure the low and high alarm set points – plus other det3ector parameters – throughout the lifespan of the detector. So you can rely on your detector to always work the way you want it to.

Use either USB or Ethernet to transfer bump tests, peak exposures and other gas detection data.


  • Configure alarm set points, display gas reading during alarm, enable non-compliance indicator, hibernate detector, schedule bump reminders, transfer event logs, time display preferences, update Firmware
  • Flexible docks and software which is expandable to five modules
  • Quick and easy set up
  • Industry leading FastBump test that eliminates bottlenecks, while avoiding costly purge cycles that waste gas
  • Gangable up to five modules, each with its own LCD screen and keypad for independent operation
  • Easy to set up with not tools required
  • Easy to connect via Ethernet to a Network
  • USB port to easily configure dock module settings or retrieve data without network access
  • Enables endless configuration of BW Clip alarm set points and other parameters throughout the gas detector operation life
  • Supports BW Clip Series, Honeywell BW Clip4, Honeywell BW MicroClip Series and Honeywell BW Ultra


Power Supply 12V/8.33A ITE Power Supply
Real Time Clock Provides time and date stamp
Communications Method Two way infrared communication between docking module and detector
External Interface 1 USB port, 1 Ethernet port
Menu Navigation Adjust display settings
Adjust time and date
Configure gas inlets
Review IntelliDoX module
Password protected
Automatic Tests Fast Bump: 10 seconds For BW Clip
Standard Bump: 40 seconds
Data Storage 2 GB internal
Pump Independent pump in each IntelliDoX module, flow rate: 350 ml/min
Instrument Management System Fleet Manger II, version 4.0 or higher
Ratings This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to the following two conditions: This device may not cause harmful interference and this device must accept any interference received including interference that may cause undesired operation.
Size 5.4″ x 14.2″ x 4.3″
Weight 4.2 pounds
Warranty Full two year warranty

Ordering Information

Each InetlliDoX Docking Station includes module, retractable stand, quick reference guide, Fleet Manager Software and instructions. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email

Catalog No.
IntelliDoX Docking Station for BW Clip DX-CLIP
IntelliDoX Docking Station for GasAlertMicrolip, XT, XL or X3 DX-MCLP
Enabler Kit includes power supply, AC power cord, ethernet cable, inlet purge filter assembly, tubing, quick connect fittings, inlet end plate DX-ENBL-NA
IntelliDoX Single Inlet Key DX-SI-KEY
IntelliDoX Multi Inlet Key DX-MI-KEY
Demand Flow Regulator REG-DF-1
Wall Mount Adapter Kit WMA-DOCK
58L Hydrogen Sulfide Calibration Gas, 25 ppm G0042-H25
58L Carbon Monoxide Calibration Gas, 100 ppm CG2-M-100-58
58L Sulfur Dioxide Calibration Gas, 10 ppm CG2-S-10-58


IntelliDox Docking Station Literature

Product Enquiry

You may also like…