Gasman Single Gas Detector from Crowcon
Designed to meet the need for personal monitoring in tough industrial environments, the Crowcon Gasman Single Gas Detector is small, light and simple to use providing comprehensive warning of hazardous gas conditions.
For best pricing, please call 1-800-952-3293 or email sales@afcintl.com
Description
The Gasman Single Gas Detector is a rugged, compact single gas personal monitor designed for use in the toughest environments. With impact resistant construction and compliance to IP65, Gasman offers a wide range of gases, including six flammable calibration options. Gasman gives an unbeatable combination of powerful loud and bright alarms. Its stunningly compact and lightweight design makes it ideal for use in industries such as oil and gas, chemical, steel works and water and water works.
Features
- Tough polycarbonate housing protection you in the harshest environments
- Water and dust resistant to IP65
- Full overmolding case for high impact resistance
- 2 levels of instantaneous alarm and TWA alarms for toxic versions
- 95 dB audible alarm
- Vivid twin red/blue visual alarms
- Internal vibrating alarm
- If ambient noise is high, gasman still alerts you by vibrating and with blue/red LED alarms
- Versions available for flammable gas, oxygen and toxic gases
- Rechargeable versions for all gas types
- Non-rechargeable versions for oxygen and toxic gases
- Real time TWA and peak display options
- Fully interchangeable intelligent sensor modules
- One button operation
- Backlit display for gas diagnostics and operating status
- East to read
- Ultra lightweight, just 85g
Specifications
| Range | Dependent on gas, see chart below |
| Audible Alarms | 95 dBA, multiple alarm sounds allow selection of distinctive tones for different alarm levels |
| Visual Alarms | Dual color red/blue flashing LEDs in gas hazard |
| Vibration Alarm | Internal |
| Display | Custom LCD with backlight, with display of gas concentration. Graphic symbols for battery (with proportional indication of remaining operation time) and display mode. Start up indication when calibration is due within 30 days, calibration overdue or service required |
| Display Mode | Normal display for real time gas concentration levels Display recall for Peak readings and TWA |
| Datalogging | Full timed datalogging with adjustable sample rate, set to 1 minute data rate, 900 hours storage at 1 minute interval, >4,800 events |
| Battery Type | Rechargeable: Li-ion battery Non-rechargeable: Lithium battery |
| Operating Time* | Rechargeable: 12 hours minimum for flammable unit, Non-rechargeable: up to 2 years |
| Sampling | Optional manual aspirator |
| Operating Temperature | -4 to 149°F |
| Humidity | 5-95% RH non-condensing |
| Intrinsically Safe | Toxic or Oxygen: ATEX II 1G Ex ia db IIC T4 Ga Flammable: ATES II 2G Ex ia d IIC T4 Gb |
| Ingress Protection | IP65 |
| PC Interface | RS232 connection from interface module in charger, RS232/USB available |
| Autocalibrator | Gasman can be routinely calibrated using Portable PC software |
| Size | 3.5″ H x 1.9″ W x .95″ D |
| Weight | Flammable: 130g, Oxygen: 129g, Toxic: 85g |
*Note: Operating time will depend on operating pattern and alarm occurrence. Frequent or long lasting alarms and use of the optional confidence beep will reduce battery life.
Sensor Specifications
|
Response
Time
|
|||
| Ammonia |
0-100 ppm
|
25 ppm
|
20 seconds
|
| Ammonia | 0-1,000 ppm | 25 ppm | 20 seconds |
| Carbon Monoxide |
0-500 ppm
|
30 ppm
|
20 seconds
|
| Carbon Monoxide H2 Filtered | 0-500 ppm | 30 ppm | 20 seconds |
| Chlorine |
0-20 ppm
|
0.3 ppm
|
20 seconds
|
| Chlorine Dioxide | 0-1 ppm | 0.1 ppm | 20 seconds |
| Ethylene Oxide | 0-10 ppm | 3 ppm | 20 seconds |
| Fluorine |
0-1 ppm
|
0.5 ppm
|
20 seconds
|
| Hydrogen |
0-2,000 ppm
|
n/a
|
20 seconds
|
| Hydrogen Cyanide |
0-25 ppm
|
5 ppm
|
20 seconds
|
| Hydrogen Fluoride |
0-10 ppm
|
1 ppm
|
20 seconds
|
| Hydrogen Sulfide |
0-250 ppm
|
5 ppm
|
20 seconds
|
| Nitrogen Dioxide |
0-20 ppm
|
1 ppm
|
20 seconds
|
| Nitric Oxide |
0-100 ppm
|
25 ppm
|
20 seconds
|
| Ozone |
0-1 ppm
|
0.1 ppm
|
20 seconds
|
| Phosgene |
0-1 ppm
|
0.1 ppm
|
20 seconds
|
| Phosphine |
0-5 ppm
|
0.1 ppm
|
20 seconds
|
| Sulfur Dioxide |
0-20 ppm
|
1 ppm
|
20 seconds
|
| Flammable |
0-100% LEL
|
20% LEL
|
20 seconds
|
| Oxygen |
0-25% LEL
|
19.5%/23.5%
|
10 seconds
|
Ordering Information
Each unit includes a calibration flow cap, pocket clip, and instruction manual, you must order charger separately. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| Gasman Gas Detector for Carbon Monoxide |
GS-AH-A-012-G
|
| Gasman Gas Detector for Carbon Monoxide, H2 Filtered | GS-CS-A-012-G |
| Gasman Gas Detector for Hydrogen Sulfide | GS-AI-A-012-G |
| Gasman Gas Detector for Hydrogen, 0-2,000 ppm |
GS-AK-A-012-G
|
| Gasman Gas Detector for Sulfur Dioxide |
GS-AJ-A-012-G
|
| Gasman Gas Detector for Chlorine |
GS-AN-A-012-G
|
| Gasman Gas Detector for Chlorine Dioxide |
GS-CK-A-012-G
|
| Gasman Gas Detector for Nitrogen Dioxide |
GS-AL-A-012-G
|
| Gasman Gas Detector for Phosphine |
GS-AT-A-012-G
|
| Gasman Gas Detector for Ammonia | |
| Gasman Gas Detector for Ammonia, 0-1,000 ppm | |
| Gasman Gas Detector for Hydrogen Cyanide |
GS-AQ-A-012-G
|
| Gasman Gas Detector for Hydrogen Fluoride |
GS-AV-A-012-G
|
| Gasman Gas Detector for Ozone |
GS-AP-A-012-G
|
| Gasman Gas Detector for Fluorine |
GS-AU-A-012-G
|
| Gasman Gas Detector for Nitric Oxide |
GS-CQ-A-012-G
|
| Gasman Gas Detector for Phosgene |
GS-BB-A-012-G
|
| Gasman Gas Detector for Oxygen |
GS-AG-A-012-G
|
| Gasman Gas Detector for Hydrogen Sulfide, 0-250 ppm |
GS-BF-A-012-G
|
| Gasman Gas Detector for Hydrogen Sulfide, 0-500 ppm |
GS-BG-A-012-G
|
| Gasman Gas Detector for Carbon Monoxide, 0-1,500 ppm |
GS-BI-A-012-G
|
| Gasman Gas Detector for Ammonia, 0-100 ppm |
GS-AR-A-012-G
|
| Gasman Gas Detector for Ethylene Oxide |
GS-CI-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Methane |
GS-AA-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Propane |
GS-AB-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Pentane |
GS-AC-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Ethylene |
GS-AE-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Hydrogen |
GS-AF-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Butane |
GS-AD-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Methane Unfiltered |
GS-BC-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Ethanol Unfiltered |
GS-BD-A-012-G
|
| Gasman Gas Detector for 0-100% LEL IPA, Unfiltered |
GS-BE-A-012-G
|
| Gasman Gas Detector for 0-100% LEL Pentane, Unfiltered |
GS-KF-A-012-G
|
| Single Way Charger |
C011318
|
| Charger Interface Kit includes single way charger/interface, USB RS232 Adaptor and PC lead |
C011305
|
| Hard Hat Clip |
C01953
|
Downloads
Gasman Single Gas Detector literature
Tags: Ammonia Gas Detector, Carbon Monoxide Gas Detector, Chlorine Gas Detector, Chlorine Dioxide Gas Detector, Ethylene Oxide Gas Detector, Fluorine Gas Detector, Hydrogen Gas Detector, Hydrogen Cyanide Gas Detector, Hydrogen Fluoride Gas Detector, Hydrogen Sulfide Gas Detector, Nitrogen Dioxide Gas Detector, Nitric Oxide Gas Detector, Ozone Gas Detector, Phosgene Gas Detector, Phosphine Gas Detector, Sulfur Dioxide.
Product Enquiry
Related products
-
Honeywell BW Ultra 5 Gas Detector for CSE
Ships from the manufacturer, shipping times may vary
-
Honeywell BW RigRat Transportable Multi-Gas Area Monitor
Ships from the manufacturer, shipping times may vary
-
Gas-Pro Multi Gas Detector from Crowcon
Ships from the manufacturer, shipping times may vary
-
Calibration Gas from NorLAB for all Gas Detectors
Ships directly from the manufacturer, shipping times may vary.