You are here:

E12-15IR High Level Ammonia Gas Detector

Get A Quote

The E12-15IR High Level Ammonia Gas Detector is a rugged reliable microprocessor based intelligent gas detector.

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or email sales@afcintl.com

Description

Description

The E12-15IR High Level Ammonia Gas Detector is a rugged reliable microprocessor based intelligent gas detector. The E12-15 can be used to monitor from ppm levels to explosive levels of ammonia gas.

The E12-15 is ideally suited for use in harsh environments where electrochemical sensor life can be short. Areas such as engine rooms, emergency vents, or other high level NH3 areas are excellent applications. The E12-15 IR Infrared Gas Detector will perform reliably in the presence of silicone and other catalytic poisoning agents and can also operate in oxygen free environments or where high background gas levels are present. There are no known poisons that affect this technology. The E12-15 IR is a stand-alone device providing a linear continuous 4 to 20 mA output representing 0 to full scale.

The E12-15 high level ammonia detector uses infrared absorption technology for detecting ammonia gas. Gases absorb infrared light only at certain wavelengths. The concentration of a gas can be quantified by measuring and comparing intensities in light bands where there is significant absorption by the target gas. The Model E12-15 IR uses an infrared light source that passes collimated light through a waveguide containing the gas sample. At the other end of the waveguide is a multi channel receiver. The measuring channel intensities and the reference channel intensities are then analyzed to quantify the gas concentration. The gas concentration is then represented at the output as a gas density measurement of % Vol measurement or ppm.

ATI is now a Badger Meter brand

 

Features

  • Requires no routine calibration to ensure proper operation
  • Continuous self-test automatically indicates a fault, with fail to safe operation
  • A multi-layered filtering system protects optics from dirt and water ingress
  • Straight optical path eliminates the need for reflective surfaces, such as mirrors or beam splitters
  • Highly resistant to poisoning and etching
  • Standard 4 to 20 mA output (current source)
  • Explosion proof housing designed for harsh environments

Specifications

Detectable Gases Ammonia
Range 0-1%, 0-2%, 0-5%, 0-10% & 0-15%
Output 4-20 mA (source type) , max 1000 ohm load at 24 VDC supply voltage
Response Time T50< 15 seconds
T90< 30 seconds
Construction 316 stainless steel
Accuracy ±3% of full scale for applied gas concentrations up to 50% of full scale
±5% of full scale for applied gas concentrations above 50% of full scale
Operating Temperature -40 to 70°C
Operating Humidity 0-99% RH non-condensing
Operating Voltage 18-32 VDC
Power Consumption 5.1 Watts Max
Maximum Current Draw Average: 210 mA, Peak 400 mA
Approvals CSA: For -40 to 50°C operation, performance tested
CAS: C1, Div 1, Groups B, C, D, T5-pending
IECEX: C1, Zn 1, Groups IIC, T5-pending
Dimensions 5.5x 2.5″
Weight 3.7 pounds

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com. Other configurations available.

Description
Catalog No.
E12-15 IR Infrared Ammonia Gas Detector, 0-1%, no junction box E12-15-01-1-1
E12-15 IR Infrared Ammonia Gas Detector, 0-1%, with junction Box E12-15-01-2-1
E12-15 IR Infrared Ammonia Gas Detector, 0-2%, no junction box E12-15-02-1-1
E12-15 IR Infrared Ammonia Gas Detector, 0-2%, with junction box E12-15-02-2-1
E12-15 IR Infrared Ammonia Gas Detector, 0-15%, no junction box E12-15-15-1-1
E12-15 IR Infrared Ammonia Gas Detector, 0-15%, with junction box E12-15-15-2-1

Downloads

E12-15IR High Level Ammonia Gas Detector literature

Product Enquiry