Honeywell BW RigRat Transportable Multi-Gas Area Monitor

Honeywell BW RigRat is so easy to use that workers can operate it with confidence trusting it to alert them to gas threats in their proximity – indoors an out, in temperatures from -40 to 140°F.

For best pricing, please call 1-800-952-3293 or email sales@afcintl.com

Honeywell BW RigRat is so easy to use that workers can operate it with confidence trusting it to alert them to gas threats in their proximity – indoors an out, in temperatures from -40 to 140°F.

Features

  • Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in it class.
  • Up to six slots for interchangeable gas sensors. There is a choice of electochemical, PID, infrared and catalytic bead sensors (measuring percent LEL and percent by volume)
  • Integrated noise sensor and meteorological data sensors
  • Enhanced configurations with programmable input and output
  • One button operation, grab and go, no expertise required
  • Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more
  • Added protection that alert workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.
  • Wireless safety perimeter, position several Honeywell BW RigRat monitors to forma a wireless safety perimeter
  • Use the Honeywell’s remote monitoring software to see gas reading, location and other data from any device with an internet connection – for fast, informed decision. Add an optional noise sensor or meteorological sensors
  • Use with Honeywell Touchpoint Plus controller for visibility on Honeywell BW RigRat monitors and worker’s personal detectors
  • Line power for extended runtime in the field
  • I/O ports providing additional input capabilities and local executive activation
  • Inert mode that prevents alarm in normal ambient air
  • Large, easy to read display
  • Rugged, weatherproof design, with optional protective cage

Applications

  • Zone declassification
  • Turnarounds
  • Confined space entry
  • Routine maintenance
  • Fenceline

Specifications

Gas Sensor Slots Up to 6
Gas Sampling Method Pumped or diffusion
Battery Rechargeable Li-Ion battery, 3.7V / 26.4 Ah
Charging Time Less than 18 hours when instrument is powered off
Running Time 8 weeks for low power model, other models vary by configuration
Keypads One button operation and programming
Display 3.5″ 240 x 320 TFT color LCD with white LED backlight
Alarm Red/yellow/green LED
Buzzer alarm: 108 dBA @ 1M
On screen indication of alarm conditions
Datalogging Complete gas sensors and instrument information for at least 4 months at one minute intervals
Wireless ISM license free band
Bluetooth Low Energy Module: BT 4.2/5.0, 2.4 GHz in default
Mesh Module: IEEE 802.15.4/915 MHz/2.4 GHz optional
Wi-FI Module: 802.11 b/g/n 2.4 GHz optional
Radio Module & Range Bluetooth Low Energy: RMBLEC, up to 16.4 feet
Mesh: RM900A – 984 feet, (868-900 MHz) or RM2400 – 492 feet (2.4 GHz)
WiFi: RMWIFIC: up to 164 feet
Outdoor Location GPS receiver module: GPS L1 frequency (1575.42 MHz, optional)
Only with IEEE 802.15.4 868 MHz/915 MHz modem and WIFI
IP Rating IP65 for pumped models, IP67 for diffusion models
Noise Sensor 60-125 dBA range; (respond: 100 Hz to 8 kHz) 1 dB resolution
A weighted 15 second equivalent level; updated every 5 seconds
Safe Area Charge Port (AC CHG Safe Area) Battery charger input 6 VDC A typical, connect to AC/DC adaptor
Field Charge (IS Chg Hazardous) Intrinsically safe line power supply input to extend instrument runtime (low power model only)
RaeMet Port (Serial Port to RaeMet wind sensor (optional)
Analog/Switch Input Port (4-20 mA in) 4-20 mA signal input, X1 channel/switch/on/off signal input, X1 channel (optional)
On/Off Switch Output (Switch) Max 20V/120 mA, SPDT Normal Open, X3 channels for external ports (optional), refer to User Guide for complete details
Temperature -4 to 140°F for pumped models
-40 to 140°F for diffusion models
Humidity 5 to 95% rH, non-condensing
Safety Certifications cETLus Class I Divison 1: Groups A, B, C, D, T4
ICE EX/ATEX
I M1 Ex ia I Ma
II 1 G Ex ia da IIC T4 Ga
For LELIR/Carbon Dioxide Sensor: no cETLus Class I Divison 1: Groups A, B, C, D, T4
Wireless Approvals FCC Part 15, IC, RE-D
ROHS RoHS Complaint, Directive (EU) 2015/863

Sensor Specifications

Sensor
Range
Resolution
Combustible Gases (IR*)
0 – 100% LEL
0-100% Vol
1% LEL
0.1% Vol
Combustible Gases (LEL 0 – 100% LEL 1% LEL
Carbon Dioxide (CO2) 0-5% Vol
100 ppm
0.01% Vol
100 ppm
Carbon Dioxide, Extended Range (CO2) 0-100% Vol 0.1% Vol
Volatile Organic Compounds (VOCs) 0-2,000 ppm 0.1 ppm
Carbon Monoxide (CO) 0-500 ppm 1 ppm
Carbon Monoxide, Extended Range (CO) 0-2,000 ppm 10 ppm
Carbon Monoxide, H2 Resistant (CO) 0-1,000 ppm 5 ppm
Hydrogen Sulfide (H2S) 0-100 ppm 0.1 ppm
Hydrogen Sulfide, Extended Range (H2S) 0-1,000 ppm 1 ppm
Sulfur Dioxide (SO2) 0-20 ppm 0.1 ppm
Oxygen (O2) 0-30% Vol 0.1% Vol
Nitric Oxide (NO) 0-250 ppm 0.5 ppm
Nitrogen Dioxide (NO2) 0-20 ppm 0.1 ppm
Hydrogen Cyanide (HCN) 0-50 ppm 0.5 ppm
Ammonia (NH3) 0-100 ppm 1 ppm
Chlorine (Cl2) 0-50 ppm 0.1 ppm

*CAUTION – the LEL IR combustible gas sensor option used in the BW ICON cannot detect certain combustible gases including hydrogen and acetylene. The application should be reviewed to ensure the ICON can provide adequate detection.

Ordering Information

The RigRat will be available soon, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Downloads

Honeywell BW RigRat Datasheet

Honeywell BW RigRat Brochure

Honeywell BW RigRat Wireless Solution

Product Enquiry

You may also like…