Pac 6000 Gas Detectors for CO, H2S, SO2 & O2
The disposable Draeger Pac 6000 gas detectors measure Carbon Monoxide, Hydrogen Sulfide, Sulfur Dioxide and Oxygen reliably and precisely, even in the toughest conditions. The robust design, quick sensor response times and a powerful battery ensure maximum safety for up to 2 years with virtually no maintenance required.
The Pac 6000 features powerful sensors with a very low T-90 response time to ensure quick reactions. The Pac 6000 is versatile thanks to its wide measurement range. For example the CO sensor measures concentrations from 1 to 1,999 ppm. The D-Light indicates whether the functionality of the device has been tested and that it is ready to use. The housing is also designed with your safety in mind: each sensor variant of the Draeger Pac 6000 features a clearly visible color coding, thereby minimizing the chance of mistakes.
The Pac 6000 can easily handle even extreme conditions: depending on the sensor, temperature from -40°C to 55°C. A membrane filter protects the sensor from foreign matter such as dust and liquids. The shock-proof, chemical resistant housing meets the requirements specified in the IP68 standard rating.
The large display clearly indicates the respective gas concentration. Other important information, such as remaining operating time and battery capacity is also displayed. The bright backlighting ensures clear reading of all values in the dark.
If the Draeger Pac 6000 measures hazardous gas concentration, it sets off an audible, visual and noticeable vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic alarm reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. earlier alarms registered can also be retrieved at a later time. The Pac 6000 with oxygen sensor has two additional alarm thresholds in addition level of safety as a pre-alarm, in addition to the main alarm, can be set for both oxygen enriched and oxygen deficient atmospheres.
The Pac 6000 logs concentrations and events along with date and time. The data can be downloaded to a PC via an interface and processed further there.
All versions of the Pac 6000 are equipped with a powerful battery. Neither the sensor nor the battery need to be changed for the entire 2 year maintenance free service life of the units. The service life of the Pac 6000 starts when it is first activated. The device authomatically switches off after 2 years.
|Range||Carbon Monoxide: 0-2,000 ppm
Hydrogen Sulfide: 0-100 ppm
Oxygen: 0-25% by volume
Sulfur Dioxide: 0-100 ppm
|Alarm Set Point||Carbon Monoxide: Alarm 1: 35 ppm, Alarm 2: 50 ppm
Hydrogen Sulfide: Alarm 1: 10 ppm, Alarm 2: 15 ppm
Oxygen: Alarm 1: 19.5 Vol%, Alarm 2: 23.5 Vol
Sulfur Dioxide: Alarm 1: 2 ppm, Alarm 2: 4 ppm
|Device Service Life||2 years from 1st activation|
|Battery Service Life||2 years, Oxygen 12 months|
|Temperature Range||-22 to 131°F|
|Humidity||10 to 90% rH|
|Protection Class||IP 68|
|Approvals||CSA, IECEx, ATEX, CE|
|Size||2.5″ x 3.3″ x 0.8″|
For pricing on Dreager Safety PAC 6000, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email email@example.com.
|Pac 6000 Single Gas Detector for Carbon Monoxide|
|Pac 6000 Single Gas Detector for Oxygen|
|Pac 6000 Single Gas Detector for Hydrogen Sulfide|
|Pac 6000 Single Gas Detector for Sulfur Dioxide||8328273|
Accessory Ordering Information
|Communication Cradle includes USB cable and Pac Vision software|
|Simple Bump Test Station||