You are here:

Clip Real Time Gas Detector for H2S, CO, O2 & SO2

Get A QuoteThe BW Clip Real Time (RT) single gas detector by Honeywell is part of Honeywell Clip maintenance free family of single gas detectors.

For best pricing, please call 1-800-952-3293 or email sales@afcintl.com

Description

Description

The BW Clip Real Time (RT) single gas detector by Honeywell is part of Honeywell Clip maintenance free family of single gas detectors. It provides the same great functionality as the BW Clip, plus the addition of a real time gas level display and the ability to calibrate the device; providing more solutions to meet your gas detection needs. Gases detected includes Hydrogen Sulfide (H2S) , Carbon Monoxide (CO), Sulfur Dioxide (SO2), Oxygen (O2). BW Clip Real Time provides real time readings of atmosphere gas concentration levels. It can be calibrated and is compatible with the IntelliDoX instrument management system. When using IntelliDoX, you can bump test each detector in fewer than 10 seconds and change the factory alarm setpoints to meet your requirements.

Features

  • Instant gas readings, even when not in alarm conditions
  • Automatic logging of the 35 most recent gas events and bump test results
  • The user may not stay in an environment long enough for a TWA, therefore the Clip RT gives them visibility of the gas readings at any given moment
  • If the user has an alarm, they can see the real time readings of the gas concentration levels and can establish if it is safe to go back into an area
  • The user can glance to check the ppm level, giving them instant visibility of any changes
  • Available in H2S, CO, O2 and SO2
  • Two year and three year version, with no need for sensor replacement, battery replacement or battery changing
  • Hibernation available with the two year unit, up to 12 months of extended service life
  • Automated self test to improve safety

Specifications

Sensors Electrochemical sensors
Alarms Visual, vibrating, audible (95dB)
Low, High
Tests Activated detectors automatically perform one internal diagnostic test every 24 hours
Battery Life Two years for H2S, CO, SO2 or O2
Three years for H2S & CO
Operating Temperature H2S: -40 – 122ºF
CO & SO2: -22 – 122ºF
O2: -4 – 122ºF
Ratings IP 66/67
Intrinsic Ratings UL: Class I, Division 1, Groups A, B, C, D, Class I, Zone 0, Gr. IIC
ATEX: CE Ex II 1 G T4, Ga IP66/67
IECEX: Ex ia IIC T4 Ga IP 66/67
CE: European Conformity
Warranty Two or three year from activation (given normal operation) plus one year shelf life (6 months for oxygen). Up to three years for two year H2S & CO detectors when used with the hibernation feature, limited to 24 months of detector operation.
Size 1.6″ x 2.0″ x 3.4″
Weight 3.2 ounces

Sensor Specifications

Sensor
Range
Alarm Low/High
Hydrogen Sulfide (H2S)
0 – 100 ppm
10/15 ppm
Carbon Monoxide 0 – 300 ppm 35/200 ppm
Sulfur Dioxide (SO2) 0-100 ppm 5/10 ppm
Oxygen 0-25.0 %Vol 19.5/23.5% Vol

Ordering Information

The Clip hydrogen sulfide gas detector / carbon monoxide gas detector includes specified sensor, SS alligator clip, concussion proof housing, test cap and instructions. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description
Catalog No.
BW Clip RT for Hydrogen Sulfide, 2 Year BWC2R-H
BW Clip RT for Hydrogen Sulfide, 3 Year BWC3R-H
BW Clip RT for Carbon Monoxide, 2 Year BWC2R-M
BW Clip RT for Carbon Monoxide, 3 Year BWC3R-M
BW Clip RT for Carbon Monoxide, 2 Year, 50 ppm/200 ppm BWC2R-M50200
BW Clip RT for Sulfur Dioxide, 2 Year BWC2R-S
BW Clip RT for Sulfur Dioxide, 2 Year, 2 ppm/4 ppm  BWC2R-S24
BW Clip RT for Oxygen, 2 Year BWC2R-X
Hibernation Case ClipHB-Case
Hard Hat Clips GA-HC-1

Downloads

BW Clip RT Operators Manual

BWClip Datasheet

Product Enquiry