NEW!! – MultiRae Wireless Six Gas Monitor

The MultiRae Gas Detector features a wide range of sensors and allows for even greater threat detection such as toxic gases, oxygen deficiency and carbon dioxide. The MultiRae Gas detector also features the longest lasting battery in its class with the extended battery. Because of the wireless nature of the instrument, real-time transmission of instrument readings and alarms can be provided for increased safety and faster response times when deployed on Rae Systems’ Dedicated Wireless Network.

Features

  • Wireless access to real time instrument readings and alarm status from any location
  • Unmistakable five way local and remote wireless notification of alarm conditions
  • Over 30 interchangeable sensor options, including 0.1 to 5,000 ppm PID
  • Intelligent sensors store calibration data, so they can be swapped in the field
  • Extensive on board gas libraries (190 VOCs and 55 combustible gases)
  • Largest display in its class
  • Continuous datalogging (6 months form 5 sensors)
  • The most advanced wireless portable chemical detector on the market
  • Highly visible and customizable for different applications
  • Man Down Alarm with real time remote wireless notification
  • Easy maintenance with replaceable sensors, pump and plug and play battery
  • Fully automated bump testing and calibration with AutoRae 2

Applications

  • Industrial hygiene, personal protection and multi gas leak detection in industries such as:
    • Oil and gas
    • Chemical
    • Aviation
    • Shipping/marine
    • Environmental
    • Pharmaceutical
  • HazMat response
  • Clandestine drug labs

Instrument Specifications

MultiRae Detectors Protected catalytic bead & NDIR for combustible gases, NDIR for carbon dioxide, 30 interchangeable electrochemical sensors for oxygen and toxic gases, photo ionization detector for VOCs
Battery Options Rechargeable Li-ion
Extended Li-ion
4 x AA alkaline batteries
Operating Hours Rechargeable Li-ion: 12 hours pumped
Extended Li-ion: 18 hours pumped
Alkaline: 6 hours pumped
Display Monochrome graphic LCD, 128 x 160 display, automatic screen flip feature
Key Pads 3 operation and programming key (Mode, Y/+, N/-)
Attachment Durable yellow boot with belt clip and wrist strap
Direct Readout Real time reading of gas concentration, PID measurement and correction factor, battery status, datalogging on/off, wireless on/off, reception quality, STEL, TWA, peak and minimum values
Alarms Wireless remote alarm notification, multi tone audible (95 dB @ 30cm), vibration, visible (flashing bright LEDs) and on screen indication of alarm conditions, Man Down Alarm with pre-alarm and real time wireless notification
Calibration Automatic with AutoRae 2 Test and Calibration System or manual
Datalogging Continuous datalogging (6 months for 5 sensors at 1 minute intervals), user configurable datalogging intervals from 1 to 3,600 seconds
Communication & Data Download Data download and instrument set up and upgrades on PC via charging and PC comm cradle, travel charger or AutoRae 2 Calibration System, wireless data and alarm status transmission via built in RF modem (optional)
Wireless Network Rae System dedicated wireless network
Wireless Frequency ISM license free bands
Wireless Range MultiRae to RaeLink3 Mesh or RaeLink 3 Z1 Mesh Modem: 33 feet
Sampling Pump Built in, flow rate: 250 cc/min, auto shutoff in low flow conditions
IP Rating IP-65 pumped
Temperature -4° to 122°F
Humidity 0 to 95% relative humidity (non-condensing)
Intrinsic Safety CSA: Class I, Division I, Groups A, B, C, D, T4
Atex: CE 0575 ex II 2G Ex ia d IIC T4 Gb
IECEx: Ex ia d IIC T4 Gb
CE Compliance EMC directive 2004/108/Ec, R&TTE directive, 1999/5/EC, ATEX directive 94/9/EC
EMI/RFI No effect when exposed to 0.43 mV/cm2, RF interference from a 5 watt transmitter at 12″
Performance Tests Mil-Std-810G compliant, LEL SCA C22.2 No. 152: ISA-12.13.01
Warranty 2 years on non consumable components, catalytic LEL, CO, H2S, & O2 sensors 1 year on all other sensors, pump, battery & other parts
Size 7.6″ H x 3.8″ W x 2.6″ D
Weight 31 ounces

Sensor Specifications

Sensor
Range
Resolution
Oxygen (O2)
0-30% Vol
0.1%
Combustible, Catalytic
0-100% LEL
1% LEL
Combustible, NDIR 0-100% LEL 1% LEL
0-100% Vol 0.1% Vol
VOCs, 10.6 ev
0-5,000 ppm
0.1 ppm
Carbon Dioxide, NDIR (CO2)
0-50,000 ppm
100 ppm
Ammonia (NH3) 0-100 ppm 1 ppm
Carbon Monoxide (CO)
0-500 ppm
1 ppm
0-2,000 ppm 10 ppm
Carbon Monoxide, H2 Compensated (CO) 0-2,000 ppm 10 ppm
Carbon Monoxide & H2S Combo CO: 0-500 ppm H2S: 0-200 ppm CO: 1 ppm H2S: 0.1 ppm
Chlorine (Cl2)
0-50 ppm
0.1 ppm
Chlorine Dioxide (ClO2)
0-1 ppm
0.03 ppm
Ethylene Oxide (ETO)
0-100 ppm
0.5 ppm
0-10 ppm 0.1 ppm
0-500 ppm 10 ppm
Formaldehyde (HCHO)
0-10 ppm
0.05 ppm
Hydrogen Cyanide (HCN)
0-50 ppm
0.5 ppm
Hydrogen Sulfide (H2S) 0-100 ppm 0.1 ppm
0-1,000 ppm 1 ppm
Methyl Mercaptan 0-10 ppm 0.1 ppm
Nitric Oxide (NO) 0-250 ppm 0.5 ppm
Nitrogen Dioxide (NO2) 0-20 ppm 0.1 ppm
Phosphine (PH3) 0-20 ppm 0.1 ppm
Sulfur Dioxide (SO2) 0-20 ppm 0.1 ppm

Ordering Information

Each MultiRae includes the following: sensors, pump, battery & wireless options as specified, rubber boot, belt clip, filter, datalogger, travel charger/pc communications adapter, AC adapter, calibration adapter, alkaline battery adapter, tool kit, PID sensor cap removal took, external filters, Flex-I-probe, quick start guide, software, calibration and test certificate and hard transport case. Optional accessories include remote sample draw kit with probe, filter and tubing, and calibration gas. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description
Catalog No.
MultiRae with pump, 10.6 eV PID, LEL, H2S, CO, O2 sensors, Li-ion Battery, Non-Wireless MBB3-A1C112E-020
MultiRae with pump, 10.6 eV PID, LEL, H2S, CO, O2 sensors, Li-Ion Battery, Non-Wireless, Calibration Kit MBB3-A1C112E-02M
MultiRae with pump, 10.6 eV PID, LEL, H2S, CO, O2 sensors, Li-ion Battery, Wireless MBB3-A1C112E-240
MultiRae with pump, 10.6 eV PID, LEL, H2S, CO, O2 sensors, Li-ion Battery, Wireless, Calibration Kit MBB3-A1C112E-42M
MultiRae with pump, 10.6 eV PID, LEL, CO+H2S, SO2, O2 sensors, Li-ion Battery, Non-Wireless MBB3-A1C1R3E-020
MultiRae with pump, 10.6 eV PID, LEL, CO+H2S, SO2, O2 sensors, Li-ion Battery, Wireless MBB3-A1C1R3E-420

Accessories

The MultiRae Gas Detector external battery charger allows a MultiRae battery to be charged while it is not housed in the unit. This is ideal for anyone who runs their MultiRae’s 24/7 or on back to back shifts. Now a back up battery can be swapped in without subjecting the instrument to down time. This is a must have accessory. The external battery charger comes as a stand alone unit and requires a power power. An additional accessory is available to group 5 battery charges on a single plastic holder, all of which can be charged simultaneously using a spider charger.

The MultiColor boots for MultiRae allow for customization of the look of MultiRae units. This is especially convenient for customers who operate with several different configurations of MultiRaes. Instead of using labels, or other ways to differentiate MultiRaes, they can assign each instrument a color so that they ensure the right instrument is selected for a given task.

Description
Catalog No.
External Battery Charger M01-3025-000
5 Bank Holder of Battery Charger M01-2110-000
Power Cord, Single 500-0036-102
Power Cord, 1-5 units 020-2480-000
Red Rubber Boot for MultiRae M01-2086-100
Orange Rubber Boot for MultiRae M01-2087-100
Blue Rubber Boot for MultiRae M01-2088-100

Downloads

Table of Ionization Potentials

PID Training Outline

MultiRae Gas Detector literature

Product Enquiry

You may also like…