You are here:

RKI Email / Text Generator for Fixed Systems

The RKI Email / Text generator is an accessory device that can be used in conjunction with any alarm system that provides a relay contact closure for an alarm condition. This unit ships directly from the manufacturer and may take 2-3 weeks.

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or email sales@afcintl.com

$560.00$840.00

Description

Description

The RKI Email / Text generator is an accessory device that can be used in conjunction with any alarm system that provides a relay contact closure for an alarm condition. It will accept 1 or 2 different contact closures, and send a customized message for each closure that could be used to indicate the type or severity of the alarm.

The user programs what message is sent to the recipients of the texts or emails. The Email / Text generator can be programmed to send emails and texts to anyone desired so that other persons can be notified of an alarm condition on the gas monitor or other controller. The emails and texts can be sent to 12 contacts.

The RKI Email / Text generator utilizes a local WiFi connection and requires a working WiFi network to operate. No software required to program the unit, simply connect to the WiFi network that is generated by the Email / Text generator and you will be directed to a website to program the device. There are no monthly subscription fees required to operate this unit.

 

 

 

Additional information

Weight N/A
Email/Text Generator

Generator 1 Contact Closure, 100-240 VAC, Generator 2 Contact Closures, 100-240 VAC, Generator 1 Contact Closure, 5 VDC & AC Adapter, Generator 2 Contact Closures, 5 VDC & Adapter

Features

  • Monitors sets of relay contacts
  • Send email and / or text messages during alarm events
  • Send email and / or text messages for power
    failure indication
  • Send custom messages
  • No monthly fees
  • Uses existing 2.4 GHz WiFi network
  • Unit can be programmed for a time delay
  • Works on normally open or normally closed
    dry contacts
  • Activated buzzer
  • Powered by 110 / 240 VAC

Specifications

Sensor Switch Normally closed (alarm triggered when contacts open)
Normally open (alarm triggered when contact close)
Schedule Settings Always
As scheduled (if set to AS SCHEDULED, the device can be configured to send alerts on certain days and within specific time windows, two start/end periods can be saved per email/text generator)
Custom Messages Alarm Message and Reset Message can be edited
Alarm Delays Delay (in seconds) between alarm triggered and an alert being sent
Delay (in seconds) between an alarm reset and an alert being set
Buzzer Enabled or Disabled, snooze alarm after a period of time (in minutes)
Time Zone The generator’s time zone can be adjusted
Notifications Email/Test: On/Off, test field for email and/or phone contacts
Resend Alerts: Period between resending alerts (in minutes)
Alarm Reset: On/Off, send notifications after an alarm is reset
Power/WiFi Outage: Send notifications if power/WiFi outage lasts more than a set period of time (in minutes)
Optional: Text field for email and/or phone contacts that will receive notifications during power WiFi outages
Input Power 110/240 VAC
Current Draw 200 mA max
WiFi 2.4 GHz (does not support 5 GHz networks)
Contacts 1 or 2 input contact ports
LED Indicators LED Flashing Orange & Buzzer-Long Beep: Device has entered initial setup mode
LED Flashing Orange Upon Start-up: The device is trying to connect to WiFi network but either has not been set up or cannot find the assigned WiFi
LED Solid Green: The device is on and functioning
Dimensions 10.4″ x 6.5″ x 4.0″
Housing 4X NEMA, IP-67

Downloads

Email/Text Generator Datsheet

Product Enquiry