You are here:

UltraRae 3000+ Benzene Specific VOC Monitor

The Rae Systems by Honeywell UltraRae 3000+ is the most advanced Benzene Specific Monitor on the market.



The Rae Systems by Honeywell UltraRae 3000+ is the most advanced Benzene Specific Monitor on the market. Its photoionization detector’s (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene specific mode. This makes it an ideal instrument for application from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down stream monitoring.


UltraRae 3000+, Honeywell, Rae Systems, PID, Photo ionization detector, volatile organic compounds, VOCs


  • Dual detection mode for total benzene exposure assessment: 60 second snap shot or 15 minute STEL measurement
  • High sensitivity to benzene (down to 50 ppb) providing a lower detection range for potentially lower future benzene exposure limits
  • Lower risk of false alarms through advanced speciation method producing benzene readings you can trust
  • Total VOC measurement mode with extended range of 0.01 to 10,000 ppm
  • Cost effective solution and low cost Rae-Sep tubes
  • Reflex PID Technology
  • 3 second response in VOC mode or 60 seconds in compound specific mode
  • Built in humidity sensor with Automatic temperature controlled sampling time calculation
  • Automatic temperature controlled sampling time calculation
  • Unique 15 minute benzene STEL calculation with 15 minute real time benzene specific measurement
  • Highly specific readings, combining a 9.8 eV UV lamp and Rae-Sep benzene tube
  • See through sampling probe design for instant tube breakthrough visibility
  • VOC mode or benzene specific mode for extreme versatility
  • Real time wireless data transmission with built in BlueTooth. Optional RAELink3 portable modem or Mesh Network support
  • Integrated Rae Systems Correction Factors list for more than 200 compounds, measuring more compounds than any other PID
  • Field interchangeable battery pack is replaceable in seconds without tools
  • Large graphic display
  • Multi language support
  • Easy access to lamp and sensor in seconds without tools
  • Much less expensive than a portable GC and no annual factory calibration required


  • Confined space entry pre screening during refinery and plant maintenance
  • Hazardous material response
  • Marine spill response
  • Refinery down stream monitoring


Detector Photo ionization detector with standard 9.8 eV or optional 10.6 eV or 11.7 eV lamps
Battery Rechargeable, external field replaceable lithium ion battery pack and alkaline battery adapter
Operating Hours 16 hours continuous operation
Graphic Display 4 lines, 28 x 43 mm
Keypad 1 operation key & 2 programming keys, 1 flashlight on/off button
Direct Readout VOCs as ppm by volume
High and low values
Battery and shutdown voltage
Date, time temperature
Alarm 95 dB buzzer and flashing red LED to indicate exceeded preset limits
High: 3 beeps and flashes per second
Low: 2 beeps and flashes per second
STEL and TWA: 1 beep and flash per second
Alarms latching with manual override or automatic reset
Additional diagnostic alarm and display message for low battery and pump stall
EMI/RFI Highly resistant to EMI/RFI. Compliant with EMC directive (2004/108/EC)
EMI & ESD Test: 100 MHz to 1 GHz 30V/m, no alarm
Contact: +/- 4kV
Air: +/- 8kV, no alarm
IP Rating IP-65, unit running
Datalogging Standard 6 months at 1 minute intervals
Calibration 2 point or 3 point calibration for zero and span
Reflex PID Technology
Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates
Communication Download data and upload instrument setup from PC through charging cradle or using BLE module and dedicated APP
Wireless data transmission through built in RF modem
Wireless Network Mesh Rae Systems dedicated wireless network
Wireless Range Up to 15′ for BLE
EchoView Host: LOS>660 feet
RaeMesh Reader: LOS>660 feet
RaeLink3 Mesh: LOS>330 feet
Low Flow Alarm Auto shut off pump at low flow condition
Sampling Pump Internal, integrated flow rate at 400 cc/min
Sample from 100′ horizontally and vertically
Temperature -4 to 122°F
Humidity 0 to 95% rH
Size 10″ L x 3″ W x 2.5″ H
Weight 26 ounces
Approvals UL: Class I, Div I, Group A, B, C, D
IECEx: CSA 10.0005 Ex ia IIC/IIb Gb T4
Wireless Frequency ISM License free band, IEEEE 802.15.4, Sub 1 GHz
Wireless Approvals FCC Part 15, CE R&TTE
Radio Module Supports BLE, RM900 or Bluetooth
Warranty 3 years for 10.6eV lamps, 1 yer for 9.8 eV lamp, pump, battery, sensor & instrument

Sensor Specifications

Gas Monitor
Response Time
0 to 99.99 ppm
100 too 999.9 ppm
1,000 to 9,999 ppm
0.010 ppm
0.1 ppm
1 ppm
< 3 seconds
0 to 200 ppm
0.010 ppm
< 60 seconds
0 to 200 ppm
0.010 ppm
< 60 seconds


Honeywell UltraRae 3000+ Compound Specific Gas Detection Instrument literature
Table of Ionization Potentials

PID Lamp Characteristic

Assessment of Exposure Risk in an Unknown Environment

Honeywell UltraRae 3000+ Compound Specific Gas Detection Instrument literature

Rae-Sep Benzene Tube literature

Rae-Sep Butadiene Tube literature

Monitoring Benzene & Choosing an Appropriate Monitor for Personal Protection & Complaince with Exposure Limits

Ordering Information

The UltraRae 3000+ Benzene Specific Monitor includes specified PID lamp and tubes, wireless communication module built in, datalogger, travel charger, Rae-Sep tubes, Flexi-Probe and short probe, external filter, red rubber boot, alkaline battery adapter, lamp cleaning kit, tool kit, Li-Ion battery and charger, operation CD-Rom, manual and soft leather case. The UltraRae Accessory Kit includes all of the above items plus a hard transport case, charging/download cradle, 5 porous metal filters and o-rings, organic vapor zeroing kit, gas outlet port adapter and tubing. The Calibration Kit includes calibration gas and regulator. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email

Catalog No.
UltraRae 3000+Honeywell UltraRae 3000+ Kit for Benzene includes Accessory Kit and Calibration Gas, BLE Data Transmission
UltraRae 3000+ Monitor Only for Benzene, BLE Data Transmission
UltraRae 3000+ Kit for Butadiene includes Accessory Kit, BLE Data Transmission
UltraRae 3000+ for Butadiene, BLE Data Transmission

Accessory Ordering Information

Catalog No.
Rae-Sep Benzene Tube, pk/5, requires 9.8 eV Lamp
Rae-Sep Halocarbon Tubes, pk/5, requires 11.7 eV Lamp
Rae-Sep Butadiene Tubes, pk/5, requires 9.8 eV Lamp
Rae-Sep VOC Tubes, pk/5
Lamp Cleaning Kit

Product Enquiry