Description
Genuine 9.8 eV PID Replacement Sensor / Lamp for MultiRae Benzene and AreaRae gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
PID Replacement Sensor / Lamp Specifications
| Sensor Type | 9.8 eV PID |
| Range | 0 – 2,000 ppm |
| Resolution | 0.3 ppm Isobutylene |
| Zero Drift/Span Drift | ±5% FSS day |
| Bias/Equilibration | No Bias/10 minutes after installation |
| Storage Life | 3 months in sealed container |
| Operating Life | ≥ 6 months |
| Calibration Gas | VOC Mode: 100 ppm Isobutylene Benzene Mode: 5 ppm Isobutyl |
| Warranty | 6 months from date of shipment |
Downloads
Technical Note: TN-106 – Gases Detected with a PID Lamp
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.
