RAD-60R Radiation Dosimeter
The RAD-60 is a Personal Alarming Radiation Dosimeter. It’s a precise and reliable instrument for ensuring the safety of personnel. Ideally, the RAD-60 is used in stand-alone conditions for everyday radiation monitoring . The RAD-60 can also be switched into System Mode, for the purpose of tracking Personnel Dose records and generating compliance reports.
The design includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, has a digital display, and operates with a single AAA alkaline battery.
With the push of a button, you can turn the unit on/off, change the digital display to read dose or dose rate, select from several dose and dose rate alarm levels, turn the chirp function on/off, reset the integrated dose, and perform battery tests. The large digital display gives instant dose or dose rate readings with a loud audible alarm.
Set in R units include AAA batteries.
|Detector||Energy compensated Si-Diode|
|Button Functions||Change display, switch on/off, chirp on/off, reset integrated dose, change alarm thresholds, activate battery test|
|Measurement Range||1 µSv to 9.99 Sv
0.1 mrem – 999 rem
|Energy Response||Hp(10), 60 keV – 3 MeV, better than ± 25% up to 6 MeV, better than ±35%|
|Dose Rate||5 µSv/h – 3 Sv/h or 0.5 mrem/h – 300 rem/h|
|Dose Rate Linearity||Better than ± 15% up to 3 Sv/h (300 rem/h)|
|Calibration||Better than ±5% (Cs137, 662 keV at 2 mSv/h), Hp(10)|
|Audible Alarms||Seven separate alarms, sound level typically better than 985 dBA at 30cm
Integrated dose, dose rate, dose overflow, dose rate overflow at 3 Sv/h or 300 rem/h, low battery 1 and 2 and defect
|Alarm Thresholds||6 preset values each for integrated dose and dose rate-push button selection|
|Connectors||Infrared communication via bottom of the dosimeter|
|Power||1 AAA alkaline cell, typical life is 1,800 hours|
|Temperature Range||-20 to 50°C|
|Size||78 x 67 x 22mm|