ppm PID Replacement Sensor for MultiRae Lite & ToxiRae Pro
$540.00
Ships directly from the manufacturer, shipping times may vary.
Call for availability
Description
Genuine ppm PID Replacement Sensor / Lamp for MultiRae Lite and ToxiRae Pro gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
PID Replacement Sensor / Lamp Specifications
Sensor Type | 10.6 eV PID |
Range | 0 – 1,000 ppm |
Resolution | 1 ppm Isobutylene |
Zero Drift/Span Drift | <10% signal/day |
Bias/Equilibration | No Bias/10 minutes after installation |
Storage Life | 3 months in sealed container |
Operating Life | 1 year in air |
Calibration Gas | 100 ppm Isobutylene |
Warranty | 1 year from date of shipment |
Downloads
Technical Note: TN-106 – Gases Detected with a PID Lamp
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.
Additional information
Weight | .5 lbs |
---|
Product Enquiry
Related products
-
AreaRae Plus Wireless Multi Gas, Multi Threat Monitor
Ships from Manufacturer, shipping times can vary
-
VOC Zeroing Tubes for MiniRae 3000 & MultiRae
Ships from Manufacturer, shipping times can vary
-
MultiRAE Benzene with Benzene Specific Measurement
Ships directly from the manufacturer, shipping times may vary.
-
MultiRae Wireless Six Gas Monitor with VOC Detection
Ships from Manufacturer, shipping times can vary