ppbRae 3000+ PID Portable ppb VOC Detector

Rae Systems’ by Honeywell ppbRae 3000+ PID is a state of the art VOC gas detector for monitoring at the parts per billion (ppb) level. This device uses a new generation of photo ionization detector (PID) and features both temperature and humidity compensation for improved accuracy. It includes built in correction factors for over 220 compounds and is suitable for use in any hazardous environment. The ppbRae 3000+ comes in a rugged housing that allows it to be IP65 certified while running and IP67 while off. It also features a large screen for ease of use and large buttons that allow it to easily be handled with gloves on. The new gen PIDs allow for detection of VOCs from1 ppb to 10,000 ppm whit a less than three second response time. Data can be transmitted from up to two miles away with the RaeLink3 wireless router for increased monitoring and fast incident response.

Features

  • Measures from 1 ppb up to 10,000 ppm with highly acute linearity
  • 3 second response time
  • Reflex PID Technology
  • Monitors real time readings and location of people
  • Humidity compensation with integral humidity & temperature sensors
  • BLE module and dedicated APP for enhanced datalogging function
  • Transmits up to 2 miles with RaeLink3 wireless router
  • Sample pump draws up to 100 feet
  • Correction factors for more than 220 compounds
  • Large display reports gas type, correction factor and concentration
  • Rugged housing for harsh environments
  • Sensor and lamp auto cleaning
  • Built in flashlight
  • Multi language capability
  • IP-67 waterproof design for easy cleaning and decontamination
  • Patented PID lamp auto cleaning

Applications

  • CBRNE
  • Decontamination
  • Environmental cleanup/remediation
  • HazMat response
  • Indoor air quality
  • Plant shutdown & turn around
  • Urban search & rescue
  • Venue protection
  • Worker exposure

Sensor Specifications

Range
Resolution
Response Time
0-9,999 ppb
1 ppb
< 3 seconds
10-99 ppm
0.01 ppm
< 3 seconds
100-999 ppm
0.1 ppm
< 3 seconds
1,000-9,999 ppm 1 ppm < 3 seconds

Instrument Specifications

Detector PID sensor with 10.6 eV lamp standard, 9.8 eV lamp optional
Battery Rechargeable, external, field replaceable Lithium Ion battery pack Alkaline battery adapter
Operating Hours 16 hours operation, 12 hours with alkaline batteries
Graphic Display 4 lines, 28 x 43mm with LED backlight for enhanced display readability
Calibration Two or three point field calibration for zero and span
Reflex PID Technology
Calibration memory for 8 calibration gases
Keypad 1 operation key, two programming keys, 1 flashlight on/off
Direct Readout Instantaneous reading of VOCs or mg/m3 (3 in upper cubic)
STEL, TWA and Peak
Battery and shutdown voltage
Date, time, temperature
Alarms 95 dB (at 12″) buzzer and flashing red LED to indicate exceeded preset limits
High: 3 beeps and flashes per second
Low: 2 beeps and flashes per second
STEL & TWA: 1 beep and flash per second
Alarms latching with manual override or automatic reset
Additional diagnostic alarm and display message for low battery and pump stall
Datalogging Standard 6 months at 1 minute intervals
Communication Download data and up load instrument setup from PC through charging cradle or using BLE module and dedicated APP
Wireless data transmission through built in RF modem
Wireless Frequency ISM license free band IEEE 802.15.4
Sub 1GHz
IEEE 802.11 bands b/g 2.4 GHZ
Wireless Approvals FCC Part 15 CE R&TTE
Low Flow Alarm Auto shut off pump at low flow condition
Sampling Pump Internal integrated flow rate 500 cc/min, sample from 100′ horizontally or vertically
Temperature -4 to 113°F
Humidity 0 to 95% rH
Wireless Range Up to 15′ for BLE
EchoView Host: LOS> 660 feet
ProRae Guardian & RaeMesh Reader: LOS> 660 feet
ProRae Guardian & RaeLink3 Mesh: LOS> 330 feet
Radio Module Supports Bluetooth or RM900 or BLE
Size 10″ L x 3″ W x 2.5″ H
Weight 26 ounces with battery pack
Approvals UL and cUL: Class 1, Div 1, Group A, B, C, D
ATEX II 1G EEX ia IIC T4
IECEx: Ex ia IIC/IIB T4
Attachment Durable bright yellow rubber boot with belt clip
Warranty 3 years for 10.6 eV PID lamp, 1 year for pump, battery & instrument

Ordering Information

Each ppbRae 3000+ includes wireless communication, datalogger with ProRae Studio, charging/download adapter, 10.6 eV lamp, Flexi-Probe, external filter, rubber boot, alkaline battery adapter, lamp cleaning kit, tool kit, lithium ion battery, VOC Zeroing tubes, operational CD-ROM, manual and soft leather case. The Accessory Kit includes all of the above plus, hard transport case, charging/download cradle, 5 porous metal filters, organic vapor zeroing kit and gas outlet port adapter and tubing. The Calibration Kit includes all of the above plus cal gas and regulator. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description
Catalog No.
ppbRae 3000+ PID Detector with Charger
059-C11D-000
ppbRae 3000+ PID Detector with Charger, Accessory Kit, Calibration Kit and Wireless Bluetooth
059-C11D-100

Rae Systems by Honeywell ppbRae 3000+ Literature

Tags: Rae Systems, Honeywell, PID ppbRae, Photo ionization detector, volatile organic, VOCs

Product Enquiry

You may also like…