Description
Description
Wireless alarm bars communicate with the MeshGuard product family network. Each alarm bar comes with a pair of xenon strobe lights and a 112 dB horn to provide remote notifications of hazards in a work environment. A wireless alarm bar can be configured as a remote device that connects to TouchPoint controller. When configured as a remote device, the alarm bar will mirror the alarm settings in the controller. When the wireless alarm bar is configured as a host device, it becomes a stand along alert notification system that communicates directly with the remote monitors in a Mesh network.
Specifications
| Input Power |
DC: 24 to 28VDC, 35W Max
AC: 110 VAC 60 Hz, 35W Max |
| Wireless |
ISM band IEEE 802.15.4/Mesh Radio |
| Transmission Range |
1,000 feet |
| Mechanical Interface |
1/2″ NPT male |
| IP Rating |
IP65 |
| Installation |
DC: Wall mounting
AC: 2″ pipe holding or wall mounting |
| Status Indicator |
4 LEDs (Network, Alarm, Communication, Mode) |
| Housing Material |
Aluminum |
| Strobes |
2 10 Joule xenon strobes (yellow & red), peak intensity 19103 Cd (yellow), 3332 Cd (red), Material LM25 TF Marine grade alloy |
| Sounder |
112 dBA @ 3′, Marine grade aluminum AlSi12Cu |
| Temperature |
DC: -20°C to 50°C
AC: -20°C to 40°C |
| Humidity |
90 to 110 kPa |
| Weight |
26.5 pounds |
| Size |
18″ x 18.75″ x 6.9″ |
| Safety Compliance |
Ex II 2G, Ex da ia IIC T6 Gb, Class I Division 2, Groups A, B, C, D |
| Wireless Certification |
FCC Part 15 Radio Equipment Directive 2014/53/EU, Red |
FA300/FA324 Alarm Bar
The FA300 alarm bar communicates directly with the controller using a permanently affixed cable with 6-pin male connector. The FA324 alarm bar communicates directly with TPPLW using a permanently fixed cable with 6-pin male connector. Each FA300/FA342 comes with four xenon strobe lights and one 117dB horn. The FA300 is continuously powered by the controller.
Specifications-FA300/FA324 Alarm Bar
| Input Power |
FA300: 12V 2A outputs from controller
FA342: 24V 2A outputs from TPPLW |
| Enclosure |
Stainless Steel light bases with polycarbonate lens covers, ABS siren horn |
| Audible Alarm |
117 dB @ 3M |
| Visual |
4 super bright xenon strobe lights with polycarbonate lens covers (red, white, blue, amber) |
| Flash Rate |
1 flash per second |
| Primary Input |
Permanently affixed cable with 6-pin male connector |
| Secondary Input |
6-pin male connector |
| Cable Length |
33′ |
| Temperature |
-25°C to 55°C |
| Size |
9.45″ x 27″ x 8.52″ |
| Weight |
16.35 pounds |
WA100 Alarm Bar
The WA100 alarm bar communicates with the MeshGuard family network. Each WA100 comes with 1 xenon strobe light and 117 dB horn. The WA100 is powered by an external DC power supply using the insulated battery terminal clips.
Specifications-WA100 Alarm Bar
| Power Supply |
Powered by 12 volt 2A |
| Enclosure |
Stainless Steel light bases with polycarbonate lens covers, ABS siren horn |
| Audible Alarm |
117 dB @ 3M |
| Visual |
1 super bright xenon strobe lights with polycarbonate lens covers (red, white, blue, amber) |
| Flash Rate |
1 flash per second |
| Temperature |
-20°C to 55°C |
| Size |
9.45″ x 20.86″ x 8.3″ |
| Weight |
16.35 pounds |
| Wireless Certification |
FCC Part 15 Radio Equipment Directive 2014/53/EU (Red) |
