Airtec Kits for Grade D Breathing Air Testing
The Nextteq Airtec breathing air kit includes everything needed to measure contaminant levels in compressed gas and supplied air.
Prices start at $1087.00
For pricing, please call 1-800-952-3293 or email email@example.com
The Nextteq Airtec breathing air kit includes everything needed to measure contaminant levels in compressed gas and supplied air. Nextteq Airtec Regulator Kits, featuring Gastec Airtec Tubes, can detect the 5 most common contaminants in compressed gas and supplied air. Batteries or power is not required and therefore these kits are intrinsically safe and can be used anytime, anywhere. Airtec detector tubes are designed to meet monitoring requirements for maintaining Grade D breathing air set by the Compressed Gas Association in Standard G-7.1.
|Maximum Inlet Pressure||3,000 psig|
|Flowmeter Delivery Pressure||50 psi, preset|
|Contaminants Detected||Carbon Monoxide, Carbon Dioxide, Water Vapor, Nitrogen Oxides, Oil Mist*|
|Carbon Monoxide||5-50 ppm|
|Carbon Dioxide||200-3,000 ppm|
|Nitrogen Oxides||0.02-0.7 ppm, 0.06-2 ppm|
|Water Vapor||20-80 mg/m3, 150-3,000 mg/m3|
*Oil Mist test may be run 1,000 scc/min for 20 minutes as indicated in the tube instructions. Flow rates over 500 scc/min require a high range flow meter. However, the regulator has a maximum flow rate of 500scc/min, so the oil mist tubes should run at a 500scc/min for 40 minutes.
Each Deluxe Airtec Kit includes the Airtec regulator assembly, rubber shroud tube holder, Detector Tube Handbook, manual, box of 10 carbon monoxide tubes (1A), box of 10 carbon dioxide tubes (2AG), box of 10 water vapor tubes (6A), box of 10 water vapor tubes (6AG), box of 10 oil mist tubes (109AD), & hard shell case. The Standard Kit includes Airtec regulator assembly, rubber shroud tube holder, Detector Tube Handbook, & manual. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email firstname.lastname@example.org.
|Deluxe Airtec Kit||STD-301|
|Standard Airtec Kit||STD-300|