Description
Description
Genuine Hydrogen Cyanide Replacement Sensor for AreaRae / MultiRae / ToxiRae Pro gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
Cross Sensitivities
| Gas |
Concentration |
Response
|
| Carbon Monoxide |
300 ppm |
15 ppm |
| Ethylene |
100 ppm |
25 ppm |
| Hydrogen |
200 ppm |
0 ppm |
| Hydrogen Sulfide |
15 ppm |
90 ppm1 |
| Nitric Oxide |
35 ppm |
-28 to 0 ppm2 |
| Nitrogen Dioxide |
5 ppm |
-20 t0 10 ppm2 |
| Sulfur Dioxide |
20 ppm |
40 to 75 ppm |
1 – Due to a very high cross sensitivity to Hydrogen Sulfide, this sensor is unsuitable for use in atmospheres that contain Hydrogen Sulfide
2 – CAUTION! Negative cross sensitivities may cause the sensor to produce lower readings than the true concentration of gas in ambient air.
Downloads
Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for Hydrogen Cyanide Replacement Sensor
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.
