C03-0912-001 PID Sensor
C03-0912-001 PID Sensor

ppb PID Replacement Sensor for AreaRae Pro & MultiRae Pro

$1,118.00

Ships directly from the manufacturer, shipping times may vary.

Call for availability

SKU: C03-0912-001 Categories: , Tag:

Description

Genuine ppb PID Replacement Sensor / Lamp for AreaRae Pro and MultiRae Pro gas detectors from Rae Systems by Honeywell.

All specifications have been verified under the following environmental conditions:

  • Temperature: 68°F
  • Relative Humidity (non-condensing): 50%
  • Ambient Pressure: 1 atm (1,013 mbar)

Refer to the Technical Note TN-114 for a glossary of terms used on this page

PID Replacement Sensor / Lamp Specifications

Sensor Type 10.6 eV PID
Range 10 ppb – 2,000 ppm
Resolution 0.01 ppb Isobutylene
Zero Drift/Span Drift <10% signal/day
Bias/Equilibration No Bias/10 minutes after installation
Storage Life 3 months in sealed container
Operating Life 1 year in air
Calibration Gas 10 ppm and 100 ppm Isobutylene
Warranty 1 year from date of shipment

Downloads

Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for ppb PID Replacement Sensor

Technical Note: TN-106 – Gases Detected with a PID Lamp

Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.

Additional information

Weight .5 lbs

Product Enquiry

Related products

C03-0912-001 PID Sensor
ppb PID Replacement Sensor for AreaRae Pro & MultiRae Pro
$1,118.00