Microdust Pro Particulate Monitor from Casella USA
The CEL-712 Microdust Pro Particulate Monitor is a rugged, hand held, data logging instrument for real-time detection of airborne dusts, fumes and aerosols.
Prices start at $3605.00
For best pricing, please call 1-800-952-3293 or email firstname.lastname@example.org
The CEL-712 Microdust Pro Particulate Monitor is a rugged, hand held, data logging instrument for real-time detection of airborne dusts, fumes and aerosols. The Microdust Pro can be used for spot checks and walk through surveys with the advantage of seeing instantly when and where excessive dust levels are occurring. The Microdust Pro is incredibly easy to use with a simple interface. A user can be taking a measurement within seconds of starting the instrument.
An optical insert is used on site that provides a spot check of the instrument’s calibration response. The screens are color coded to ease navigation, once a measurement is started they turn green or red when stopped. When taking a measurement, real time instantaneous and average levels are shown and subsequently stored to the memory for review later.
The instrument is factory calibrated using a method traceable back to isokinetic techniques and is conducted in a custom-built wind tunnel using ISO 12103-1 A2 Fine test dust (Arizona road dust equivalent). Each probe is also supplied with it own unique Calibration Insert, which creates a known optical scattering effect in the probe’s sampling chamber. This fixed reference can be used to confirm the original factory calibration point, although annual factory recalibration is recommended. While the Microdust Pro comes factory calibrated, by using an optional Apex2 Air Sampling Pump and gravimetric adaptor user defined dust type settings may be obtained. This means that the user can calculate a correction factor for the actual type of dust being measured and ensures maximum accuracy for their particular application.
The Microdust Pro can be downloaded to Casella Insight Data Management Software using the USB cable provided. Once downloaded, the time history of the dust level can be displayed and analyzed as necessary, so the times and extent of particularly “dusty” events can be seen. Measurements can be stored in relation to the person or area they were measured and reports can be produced showing the relevant data for multiple people or places as required.
- Unique real time graphical display of dust levels
- Simple icon driven user interface
- Wide range: 0.001 to 250 g/m3
- Unique removable sampling probe
- Rugged design for harsh environments
- Multi-language operation
- Samples for total dust, respirable, PM2.5 and PM10 with optional adaptor
- Unique on site calibration insert
- Environmental enclosure available for boundary monitoring applications
- Risk assessments for dusts and aerosols
- Monitoring dust levels within the workplace
- industrial process monitoring
- Testing air filtration efficiency
- Environmental dust assessments
- Boundary monitoring for construction and demolition
|Range||0.001mg/m3 – 250,000 mg/m3|
|Batteries||3 x AA|
|Battery Run Time||About 13 hours|
|External Power||12 VDC|
|Logging Interval||1 second to 60 minutes|
|Memory||86,000 data points|
|Communication||Mini B USB|
|Analog Output||0-2.5 V DC FSD|
|Dimensions||Instrument: 6.8″ x 2.8″ x 1/3″
Probe: 1.4″ X 8.1″
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email email@example.com.
|Microdust Pro Kit includes probe, calibration insert, wrist strap, cleaning bellows, AA batteries, Cal cert, field guide, USB cable, Insight software and case|
|Size Selective Adapter, requires PUF Filters and Sampling Pump||206102B|
|Gravimetric Dust Adapter||
|PUF FIlters for PM 2.5 pk/10||P118204|
|PUF FIlters for PM 10, pk/10||P118206|
|PUF FIlters for Respirable, pk/10||P118208|
|Air Cleaning Bellows||102933A|