Hydrogen Sulfide Replacement Sensor for QRae 3

$194.00

Call for availability

Description

Genuine Hydrogen Sulfide Replacement Sensor for QRae 3 gas detectors from Rae Systems by Honeywell.

All specifications have been verified under the following environmental conditions:

  • Temperature: 68°F
  • Relative Humidity (non-condensing): 50%
  • Ambient Pressure: 1 atm (1,013 mbar)

Refer to the Technical Note TN-114 for a glossary of terms used on this page

Hydrogen Sulfide Replacement Sensor Specifications

Sensor Type Electrochemical
Range 0-100 ppm
Resolution 0.1 ppm
Filter No
Bias/Equilibration 0 V
Storage Life 6 months in sealed container
Operating Life 2 years in air
Calibration Gas 10 ppm Hydrogen Sulfide in Nitrogen
Temperature Range -4°F to 122°F
Storage Temperature Range 32°F to 68°F
Pressure Range Atmospheric ±10%
Operating Humidity 15 to 90% rH non-condensing
Warranty 2 years from date of shipment

Cross Sensitivity Data

Gas
Concentration
Response
Carbon Monoxide
300 ppm
≤1.5 ppm
Sulfur Dioxide 5 ppm 1 ppm
Nitric Oxide
35 ppm
< 0.7 ppm
Nitrogen Dioxide
5 ppm
-1 ppm
Hydrogen 10,000 ppm 10 ppm

Poisoning – Sensors are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapors is avoided, both during storage, fitting into instruments and operation.

Downloads

Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for Hydrogen Sulfide Replacement Sensor

Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.

Additional information

Weight .5 lbs

Product Enquiry

032-0202-000 Hydrogen Sulfide Sensor
Hydrogen Sulfide Replacement Sensor for QRae 3
$194.00