Description
Genuine Ethylene Oxide (ETO-A) Replacement Sensor for AreaRae / MultiRae / ToxiRae Pro gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
Ethylene Oxide (ETO-A) Replacement Sensor Replacement Sensor Specifications
| Sensor Type | Electrochemical |
| Range | 0-100 ppm |
| Resolution | 1 ppm |
| Bias/Equilibration | Bias on: 6 hours after installation |
| Drift | < 2% signal loss/month |
| Storage Life | 6 months in sealed container |
| Operating Life | 1 year in air |
| Calibration Gas | 20 ppm ETO or equivalent of 50 ppm Carbon Monoxide in Air |
| Temperature Range | -4°F to 122°F |
| Storage Temperature Range | 32°F to 68°F |
| Pressure Range | Atmospheric ±10% |
| Operating Humidity | 15 to 90% rH non-condensing |
| Warranty | 1 year from date of shipment |
Correction Factors
| Gas | |
| Ethylene Oxide | |
| Carbon Monoxide | 2.5 |
| Ethanol | |
| Methanol | 0.5 |
| i-Propanol | |
| i-Butylene | 2.5 |
| Butadiene | |
| Ethylene | 0.8 |
| Propene | |
| Vinyl Chloride | 1.3 |
| Vinyl Acetate | |
| Formic Acid | |
| Ethyl Ether | |
| Formaldehyde | 1 |
Downloads
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.
