Description
Genuine Carbon Dioxide NDIR Replacement Sensor for MultiRae and ToxiRae Pro gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
Carbon Dioxide NDIR Replacement Sensor Specifications
Sensor Type | Non-dispersive Infrared NDIR %LEL |
Range | 0-50,000 (0-5.0% Vol) |
Resolution | 250 ppm when below 25,000 ppm 500 ppm when above 25,000 ppm |
Drift | <5% signal/month |
Bias/Equilibration | 1 minute after installation |
Storage Life | 2 years in sealed container |
Operating Life | 2 years in air |
Calibration Gas | 5,000 ppm Carbon Dioxide in Nitrogen |
Temperature Range | -4°F to 122°F |
Storage Temperature Range | 32°F to 68°F |
Pressure Range | Atmospheric ±20% |
Operating Humidity | 0 to 95% rH non-condensing |
Warranty | 1 year from date of shipment |
Downloads
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.