CAL 2000 Calibration Gas Generator includes nylon carrying case, batteries, hose and instructions, source not included
$2,253.00
Ships from manufacturer, shipping times may vary.
Ships from the manufacturer, shipping times may vary
Description
The Cal 2000 Gas Generator features field replaceable, electrochemical generating cells provide a calibration standard for accurately testing chlorine, chlorine dioxide, hydrogen, hydrogen cyanide and hydrogen sulfide gas sensors.
The Cal 2000 is microprocessor controlled and has an LCD display allowing field adjustable ppm and flow rate. The generating cells are interchangeable and field replaceable. Best of all, the Cal 2000 provides up to 50 times as much calibration gas as a disposable cylinder at approximately the same cost. The electrochemical generating cells do not degrade over time.
The Cal 2000 gas generator has a built in mass flow sensor that automatically compensates for altitude and temperature. The mass flow sensor combined with the instruments internal pump, provide extreme flexibility for calibrating both diffusion and sample draw detection systems.
Features
- Demand flow capable
- A compact hand held size
- Automatic purge on shut down
- Low power consumption
- Alkaline battery powered
- Adjustable ppm and flow rate
- Interchangeable calibration gases
- NIST traceable certificate
- CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark
- ATEX II3G EEx nL IIB T4 approved
Specifications
Hydrogen Sulfide |
0.5-50 ppm
|
Hydrogen Sulfide Micro-Cell |
0.05-1 ppm
|
Chlorine |
0.5-50 ppm
|
Chlorine Micro-Cell |
0.05-1 ppm
|
Chlorine Dioxide |
0.5-5.0 ppm
|
Hydrogen Cyanide |
0.5-50 ppm
|
Hydrogen Cyanide Micro-Cell | 0.1-2.0 ppm |
Hydrogen |
0.5-50 ppm
|
Air Flow Rate, with internal pump |
0.2 to 1 LPM
|
Sample draw Rate, with pump disabled |
0.2 to 5 LPM
|
Useful Cell Life |
10, 50 or 100 hours
|
Accuracy |
±10%
|
Repeatability |
±5%
|
Warm up Time to 90% |
About 5 minutes
|
Operating Temperature |
0 to 50°C
|
Relative Humidity |
0-100%
|
Battery Power |
4 Alkaline C cells
|
Battery Life |
10 hours at 0.5 LPM
|
Size |
8.5″ x 4.25″ x 3″
|
Weight | 3 pounds |
Approvals | CSA NRT/C Exia T-6 ATEX II3G EEx nL IIB T4 |
Please Note: For Cal 2000: ppm is variable with flow rate, output given at 0.5 LPM
Downloads
Additional information
Weight | 3 lbs |
---|
Product Enquiry
Related products
-
GENie EC Calibration Gas Generator
ships directly from the manufacturer, shipping times may vary
-
Ammonia Quick Check Vials, pk/12
$290.00Ships from Manufacturer, shipping times can vary
-
Chlorine Source for CAL 101, 2 hours, must specify range
$0.00Out of stock
-
Chlorine Source for GENie EC, 10 hours, 0.5 – 50 ppm range
$580.00Ships from manufacturer, shipping times may vary