9.8 eV PID Replacement Sensor for MultiRae Lite Benzene & AreaRae

$757.00

Call for availability

Description

Genuine 9.8 eV PID Replacement Sensor / Lamp for MultiRae Benzene and AreaRae gas detectors from Rae Systems by Honeywell.

All specifications have been verified under the following environmental conditions:

  • Temperature: 68°F
  • Relative Humidity (non-condensing): 50%
  • Ambient Pressure: 1 atm (1,013 mbar)

Refer to the Technical Note TN-114 for a glossary of terms used on this page

PID Replacement Sensor / Lamp Specifications

Sensor Type 9.8 eV PID
Range 0 – 2,000 ppm
Resolution 0.3 ppm Isobutylene
Zero Drift/Span Drift ±5% FSS day
Bias/Equilibration No Bias/10 minutes after installation
Storage Life 3 months in sealed container
Operating Life ≥ 6 months
Calibration Gas VOC Mode: 100 ppm Isobutylene
Benzene Mode: 5 ppm Isobutyl
Warranty 6 months from date of shipment

Downloads

Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for 9.8 eV PID Replacement Sensor

Technical Note: TN-106 – Gases Detected with a PID Lamp

Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.

Additional information

Weight .5 lbs

Product Enquiry

C03-0912-010 9.8 eV PID sensor
9.8 eV PID Replacement Sensor for MultiRae Lite Benzene & AreaRae
$757.00