Description
Description
The Sensit HXG-3 is an advanced, portable combustible gas leak detector capable of detecting and monitoring combustible gases such as natural gas, methane, and propane. This unit has a backlit LCD display shows percent lower explosive limit (LEL) and part-per million (ppm) readings simultaneously for accurate gas leak detection and gas analysis. Audible and visual alarms warn of potential hazardous conditions. Find gas leaks fast! Gas leaks can easily be pinpointed by using an audible tick rate. The sensor is located at the end of a flexible gooseneck to easily reach areas where leaks may be suspected.
A Data Save feature allows you to save data during any gas leak investigation.
One of the best features of the Sensit HXG-3 is its ability to find gas leaks quickly. The device uses an audible tick rate to pinpoint any leaks, and the sensor is located at the end of a flexible gooseneck, making it easy to reach areas where leaks may be suspected.
The HXG-3‘s combustible gas leak detection capabilities are second to none. It displays %LEL and PPM simultaneously, with an LEL range of 0-100% and a PPM range of 0-50,000.
- LEL Range 0-100% LEL
- PPM Range 0-50,000 ppm
Note: The HXG3 cannot be used to check for carbon monoxide leakage from furnace heat exchangers due to the extremely low concentrations of carbon monoxide necessary to detect (less than 9 ppm/min). These low levels of carbon monoxide cannot reliably be detected by combustible gas detectors.
