Description
Description
Genuine Sulfur Dioxide Replacement Sensor for AreaRae / MultiRae / ToxiRae Pro gas detectors from Rae Systems by Honeywell.
All specifications have been verified under the following environmental conditions:
- Temperature: 68°F
- Relative Humidity (non-condensing): 50%
- Ambient Pressure: 1 atm (1,013 mbar)
Refer to the Technical Note TN-114 for a glossary of terms used on this page
Cross Sensitivities
| Gas |
Concentration |
Response
|
| Carbon Monoxide |
300 ppm |
<1 ppm |
| Ethylene |
50 ppm |
<45 ppm |
| Hydrogen |
400 ppm |
<1 ppm |
| Hydrogen Sulfide |
25 ppm |
0.1 ppm |
| Ammonia |
20 ppm |
0 ppm |
| Nitric Oxide |
50 ppm |
0-5 ppm |
| Nitrogen Dioxide |
6 ppm |
<-10 ppm |
| Hydrogen Cyanide |
10 ppm |
<5 ppm |
| Acetylene |
10 ppm |
<30 ppm |
Note: The table above is not exclusive and other gases not included in the table may still cause a sensor to react. The figures in this table are typical values and should not be used as a basis for cross calibration. Cross sensitivities may not be linear and should not be scaled. All data based on a 5 minute gassing. For some cross interferents break through will occur if gas is applied for a linger time period.
Downloads
Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for Sulfur Dioxide Replacement Sensor
Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.
