0-20 LPM Flowmeter for air sampling pumps.

New Mobile app now available. See details below. PortaGas has developed a recyclable cylinder program utilizing a complete line of reusable, sustainable cylinders. This eliminates the cost and work associated with the current cylinder disposal process.

Trade in any MeshGuard or competitive detector and receive $500 off the list price of a new MeshGuard detector. Trade in a FMC-2000 controller or competitive controller and receive $1000 off a new FMC-2000 controller. MeshGuard trade ins are eligible for a 15% discount on ProRae Guardian Tier 2 licenses. Valid until 6/30/2018. The MeshGuard is a battery operated, semi-fixed, wireless monitor for gas detection. An internal mesh radio allows it to form an intelligent network for enhanced safety without costly wiring. MeshGuard systems can easily be configured for a broad range of applications. The MeshGuard easily connects to a controller and/or wireless alarm bar.

Trade in any legacy Rae Systems or competitive docking station and receive $200 off the AutoRae 2. Trade in any Rae Systems cradle and receive $75 off a new AutoRae 2 cradle. Valid until 12/31/18. The AutoRae 2 Automatic Test and Calibration System for the Rae Systems portable monitors makes compliance with gas monitor test and calibration requirements as easy as pressing a button.

Trade in any single gas detector and receive $75 off a Rae Systems or BW MultiGas detector. Valid thru 12/31/18. The Rae Systems ToxiRae 3 is a full featured single gas monitor that offers unequaled cost of ownership value. The ToxiRae 3 is compatible with the AutoRae Lite bump and calibration station. STEL TWA, low and high alarms can also be recorded. Gases detected includes carbon monoxide CO and hydrogen sulfide H₂S.

Trade in any single gas detector and receive $75 off a Rae Systems or BW MultiGas detector. Valid thru 12/31/18. The ToxiRae Pro LEL from Rae Systems is the world's first wireless personal combustible gas detector. The ToxiRae Pro LEL takes worker protection to the next level by providing safety professionals wireless access to real time instrument readings and alarm status (including man-down alarm) from any location for better visibility and faster response.

Trade in any single gas detector and receive $75 off a Rae Systems or BW MultiGas detector. Valid thru 12/31/18. The ToxiRae Pro is the world's first wireless personal monitor for toxic gases and oxygen. The Rae Systems ToxiRae Pro takes worker protection to the next level by providing safety professionals wireless access to real time instrument readings and alarm status (including man down alarm) from any location for better visibility and faster response.

A 25mm cassette with .8µm pore size for asbestos sampling.

A self-contained head mounted powered air purifying respirator designed for light duty industries including pharmaceutical, chemical, laboratory and healthcare.

A self-contained head mounted powered air purifying respirator enhanced for maximum mobility and protection in medium and heavy duty industries./p> (3)

A self-contained head mounted powered air purifying respirator enhanced for maximum mobility and protection in medium and heavy duty industries.

ATI's Model Q45WQ Water Quality Panel is a flexible system designed for continuous, on-line monitoring of multiple parameters in municipal water distribution systems and potable water treatment facilities. The instrumentation contained in each Water Quality Panel is selected by the end user and customized to meet your individual monitoring requirements.

The Water Quality Monitors that are used on the panel were designed to provide long service life with minimal maintenance. The panel is easy to start up, as all components have no moving parts to break down, nor do they consume costly reagents.

The Q45WQ Water Quality Panel includes a 3/8" thick PVC mounting plate cut to the customers specified dimensions, integral stainless steel mounting inserts for all analyzers, flowcells, inlet pressure regulator and strainer. All sample delivery hardware is preplumbed and a 48 hour factory "wet test" of the complete system is preformed prior to delivery.

Modules Available

• Residual Chlorine - Free of Continuous Measurement: The monitor is programmable for either measurement with just an easy membrane and electrolyte change. Does not require costly chemicals, reagents or buffers to operate. Large, dual line LCD display.
• Turbidity - Nephelometric Measurement: The sensor receives scattered light at a 90° angle through flat surface sensor and is available with infrared or white light light sources. Stable, self-adjusting electronic zero with wide measuring range.
• Conductivity - 4-Electrode Style Sensor: Employs 4 electrodes to cover a wide conductivity range of measurement without the need for multiple sensors. Automatic foulant rejection circuitry is used to compensate for sensor fouling.
• Particle Counter - Laser Based Sensor: Based on a laser light blocking principle, the sensor provides particle count data over range from 2 to 400um. Incorporates a removable measuring chamber for easy cleaning and maintenance.
• pH/ORP - Differential-Style Sensor: A large volume, dual junction saltbridge is used to maximize the in service time of the sensor. A replaceable saltbridge allows for easy and inexpensive sensor regeneration.
• Fluoride - ISE Sensor: The system employs a single combination ion selective electrode with a wide measuring range from 1,000 ppm down to 0.1 ppm
• Dissolved Oxygen - Galvanic Sensor: Rebuildable cartridge system membraned sensor with replaceable lead anode.

Specifications

Ordering Information

For pricing please call AFC International at 800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Downloads

Q45WQ Literature

ATI's Series D12 gas transmitter product line has been expanded. Now available in this versatile package is an LEL transmitter utilizing an Infrared sensor that resists the poisoning problems inherent in catalytic bead sensors.

ATI's Series PQ45 is the answer to the need for a rugged field deployed package capable of measuring and recording water quality data in a variety of operating environments.

AccuSense gives First Responders the power of a laboratory-grade, gaseous chemical detection system in a field-portable VOC monitoring unit. It's like have the entire GC lab and technicians with you in a simple to use one button system. It is the perfect portable device for the detection, identification and quantification of Toxic Industrial Chemicals (TICs).

Aerotest Simultan HP +P is suited for examining the quality of air supplied by compressors or compressed air cylinders in the high pressure range.

Agricultural workers are exposed to numerous on the job respiratory hazards. Pesticides, fertilizers, dusts disinfectants, paints and gases are just a few of the hazards which may be encountered.

Air line hose for Allegro Safety supplied air systems.

Air line hose for Draeger Safety supplied air systems.

Airborne toxins present an immediate danger to the health of a workforce. When environments turn toxic, a fast safe escape is crucial. The new Draeger Parat 4920 full face respirator is designed to be easily donned, protecting users from toxic industrial and fire related gases, vapors and particles during escape.

Airborne toxins present an immediate danger to the health of a workforce. When environments turn toxic, a fast safe escape is crucial. The new Draeger Parat 5500 is designed to be easily donned, protecting users from toxic industrial and fire related gases, vapors and particles during escape.

Airborne toxins present an immediate danger to the health of a workforce. When environments turn toxic, a fast safe escape is crucial. The new Draeger Parat 7500 is designed to be easily donned, protecting users from toxic industrial and fire related gases, vapors and particles during escape.

Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. A CO monitor is integrated to meet OSHA requirements for continuous monitoring of carbon monoxide levels.

Allegro's Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig.

Allegro's Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air.

Allegro's wall cases protect respirators against damaging plant and window environments. They are made of corrosion resistant ABS with ultraviolet inhibitors.

Aluminum and carbon composite cylinders for self contained breathing apparatus.

An optional accessory for the Quantifit Fit Tester is the new Card Printer for printing cards or badges so that employees can show their up to date fit testing results.

Analyzing air currents is simple and economical using this Airflow Test Kit. The kit is always ready to use.

Area monitoring reinvented. That's what Draeger's X-zone 5500 brings to a worksite: a safer, more effective way to monitor for hazardous gases. In combination with the Draeger X-am 5000, 5100 or 5600 gas detection instruments, the X-zone 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology.

Assorted tube fittings for all Rae Systems gas detectors in a handy storage box.

Automatic bump tests, calibration, reduced test gas consumption, sort testing times and comprehensive documentation come standard in this new device from Draeger Safety.

Belt mounted for carrying respirators, gloves, goggles and small tools. Constructed of lightweight nylon reinforced vinyl fabric with Velcro closure to protect equipment from dust and moisture.

Breathe cool, stay safe: Draeger X-plore 1750 and 1760 is Draeger's new generation particle filtering face piece respirators, coming with distinct improvements in comfort and protection.

Bright orange cases for safely storing your Draeger SCBA.

CFM tester checks the volume of air that gets to the respirator. A flow meter simply quick connects onto an airline hose to check the respirator system for NIOSH compliant air flows.

CLI products provide an easy and effective means to clean-up of surfaces contaminated by these chemical spills.

Chemical contamination on workplace surfaces can result in significant skin exposure. Identification of areas and tasks for risk of dermal exposure is a critical element in a hazard assessment as required by OSHA’s new PPE standard.

Chlorination of potable water, wastewater effluent and industrial cooling water is widely used throughout the world to control biological activity in the water. Disinfection of potable water with chlorine ensures that tap water is safe to drink after passing through the distribution system piping.

Chlorine dioxide is a powerful oxidizing agent used for disinfection of potable water, cooling towers and food wash water. It is also widely used for the bleaching of pulp in paper mills. As a disinfectant, ClO₂ has advantages over chlorine in that it does not react with ammonia and many organic compounds while proving more effective at controlling bacteria, spores, viruses, and cysts.

Clearance measurement was never this easy and convenient: The Draeger X-am 8000 measures up to 7 toxic as well as flammable gases, vapors and oxygen all at once - either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.

Colorimetric tubes for chemicals starting with N from Draeger .

Colormetric SWYPE™ systems are simple, visible skin exposure indicators. SWYPEs™ are best described as a workers’ training tool used to identify work practices that may result in skin exposure.

Combining versatility, ease of use and the latest breathing apparatus design, Draeger's PAS Micro is among the most technologically advanced, short duration emergency escape units available.

Combustible gas detectors are used in a wide variety of industrial plants to detect gas leakage or buildup before it reaches explosive levels.

Conductivity measurement in aggressive chemical solutions or in water systems containing large amounts of solids, oil, and greases is very maintenance intensive using conventional 2 or 4 electrode sensors. ATI's Model Q46CT employs an inductive (toroidal) sensor that allows measurement in corrosive samples with virtually no maintenance.

Consistent with the ONESuit^® brand, OneSuit^® Shield was engineered to meet the needs of hazmat professionals seeking the highest levels of protection. ONESuit^® Shield combines uncompromised protection with exceptional comfort in a Level B configuration. Certified to CBRN First Response and Chemical Splash standards, this lightweight and durable garment provides enhanced mobility for performing the most demanding tasks.

Daily bump testing made simple with the PS200 ABC for PS200 gas detectors.

Daily bump testing made simple with the PS500 ABC for PS200 gas detectors.

Daily bump testing made simple with the TS400 for GfG G450 & G460 gas detectors.

Dechlorination of wastewater effluent is common practice in many wastewater facilities throughout the US. Strongly reducing sulfur compounds are used to eliminate chlorine residuals that might prove toxic to fish in the receiving stream.

Designed to meet the need for personal monitoring in tough industrial environments, the Crowcon Gasman is small, light and simple to use providing comprehensive warning of hazardous gas conditions.

Detect up to 29 different gases with the Pac 8000 single gas detector.

Dissolved oxygen monitoring is critical to stable operation of biological processes in wastewater treatment plants. Whether it be fine bubble aeration, coarse bubble aeration, surface aeration or brush aerators, maintaining the proper DO level will produce better results. The Q46D is ideal for control applications where reliable performance is required 365 days a year.

Draeger Diffusion Tubes are direct reading, scaled tube that can be used for determining time weighted average concentrations (TWA).

Draeger Safety's X-am 2500 accurately detects flammable gases, oxygen, carbon monoxide, nitrogen dioxide, sulfur dioxide and hydrogen sulfide and is the only 1-4 gas monitor that you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.

Draeger Tubes - Draeger gas detector tubes starting with the letter A.

Draeger Tubes - Draeger colorimetric detector tubes for chemical starting with C.

Draeger Tubes - Draeger colorimetric tubes for chemicals starting with H.

Draeger Tubes - Draeger short term colorimetric tubes for detecting chemicals that start with F.

Draeger Tubes - Draeger short term detector tubes for chemicals starting with E.

Draeger Tubes - Draeger short term gas detection tubes for chemicals starting with the letter B.

Draeger Tubes by Draeger - Colorimetric detector tubes for chemicals starting with P from Draeger Safety.

Draeger Tubes by Draeger - Colorimetric detector tubes from Draeger Safety starting with O.

Draeger Tubes by Draeger - Draeger colorimetric detector tubes for chemicals starting with S.

Draeger Tubes by Draeger Safety - Draeger Safety colorimetric detector tubes for detecting chemicals starting with T.

Draeger Tubes by Draeger.Draeger colorimetric detector tubes for chemicals starting with I.

Draeger Tubes from Draeger - Draeger tubes for chemicals starting with M.

Draeger X-am 7000 combustible gas detector is an innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The Draeger X-am 7000 also has a photo-ionization detector (PID) that detects volatile organic compounds (VOC) for VOC monitoring and VOC gas detection.

Draeger detector tubes for detecting vinyl chloride.

Draeger detector tubes for detecting water vapors.

Draeger detector tubes for detecting zinc chromate.

Draeger short term detector tubes for detecting xylene.

Draeger short term detector tubes for gasoline.

Draeger tubes - Draeger short term detector tubes for chemicals starting with D.

Draeger's FPS 7000 series face mask sets new standards in personal safety, protection and comfort. The FPS 7000 face mask is the only mask designed specifically to meet the new NFPA 1981-2007 standards.

Draeger's PAS Colt combines versatility, ease of use and the latest in breathing apparatus design. It is among the most technologically advanced, short duration emergency escape unit available.

ER2000 Escape Respirator is a hood style full face respirator that provides respiratory protection from Nuclear, Biological and Chemical (NBC) warfare agents as well as Toxic Industrial Materials (TIM's).

Experience a new dimension of comfort and safety in respiratory protection: the Draeger X-plore twinfilter series.

Explosives remain the weapon of choice for terrorists around the world. Improvised Explosive Devices (IEDs) are a threat from international terrorist organizations and local, home-grown terrorists as well. Sadly, Home Made Explosives (HMEs) and IEDs have become a fact of modern life.

FMC 2000 is a multi-channel controller with built in modem designed for integration with Rae Systems' wireless mesh network products. It is simple to install and operate, versatile, and dependable.

Featuring an ergonomic design and innovative infrared sensor technology, the Draeger X-am 5600 is the smallest gas detection instrument for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible and toxic gases and vapors as well as oxygen.

Fluoride is widely added to drinking water systems to help prevent tooth decay. It is normally added in the form of liquid hydrofluorosilicic acid, which can be easily handled and applied using standard metering pumps. While control of the fluoridation process is easily handled by simple flow proportional feed, monitoring of final fluoride concentrations is useful in providing an alarm in the case of overfeed problems.

For all full facepieces, an easily adjustable hair net is available for quick donning.

For occupational noise and industrial hygiene, measuring noise exposure of employees quickly and reliably is essential.

For over 40 years, the Gastec Pump & Tube System has provided fast, simple and precise measurement of select fumigation applications.

For puff testing diffusion gas detectors, the Puffer includes a short outlet tube. Gas is ejected from the generator by pressing the bladder on the front of the unit.

For qualitative fit testing of air purifying respirators this Smoke Test Kit offers everything needed for meeting OSHA's protocol for fit testing with smoke.

For quick and easy ready to use cleaning and disinfecting of personal safety equipment. Non-streaking cleaner makes this ideal for industrial environments.

For use in industrial applications where a simple, robust and easy to use breathing apparatus is required, the Draeger PAS Lite SCBA combines reliability with comfort and performance.

For use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe.

GasSens is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. Economical and low maintenance, this system is your best choice for reliable leak detection.

Gastec by Nextteq short term colorimetric tubes for detecting chemicals that start with F.

Gastec colorimetric detector tubes for chemical starting with C.

Gastec colorimetric detector tubes for chemical starting with P.

Gastec colorimetric detector tubes for chemical starting with T.

Gastec colorimetric detector tubes for chemicals starting with V.

Gastec colorimetric gas detector tubes starting with the letter A.

Gastec colorimetric tubes for chemicals starting with H.

Gastec colorimetric tubes for chemicals starting with I.

Gastec short term detector tubes for chemicals starting with D.

Gastec short term detector tubes for chemicals starting with E.

Gastec short term detector tubes for chemicals starting with M.

Gastec short term detector tubes for chemicals starting with N.

Gastec short term detector tubes for chemicals starting with S.

Gastec short term detector tubes for detecting xylene.

Gastec short term gas detection tubes for chemicals starting with the letter B.

Genuine sensors and accessories for Rae Systems AreaRae Wireless gas detectors.

Genuine sensors and accessories for Rae Systems MeshGuard Wireless gas detectors.

Genuine sensors and accessories for Rae Systems MultiRae  gas detectors.

Genuine sensors and accessories for Rae Systems QRae 3 multi gas detector.

Genuine sensors and accessories for Rae Systems QRae II multi gas detector. Trade in any multi gas detector and receive $75 off a Rae Systems or BW multigas detector. Valid thru 12/31/18.

Genuine sensors and accessories for Rae Systems ToxiRae Pro single gas detectors.

Get maximum flexibility with the Protege SG Single Gas Detector for over 13 different toxic gases 

Give your team real time connectivity they need, wherever they need it.

Government organization such as OSHA have set recommended heat stress limits for various activities.

Hydrogen Peroxide (H₂O₂) is an extremely strong oxidizer which is widely used in bleaching application in the paper industry and is sometimes added to water systems for the purpose of disinfection.

Ideally suited to a wide range of industrial noise measurement applications, the CEL-620 series sound level meters use the latest technology to give high standards of performance in a compact design.

Improve safety and productivity with the most flexible, user friendly tape based gas detector for low level toxics, the SPM Flex by Honeywell Analytics.

In 2008, NFPA 1989 mandated an outside air analysis at least quarterly. With associated rules governing routine service, you may actually be required to test six times each year or more.

In areas such as painting or asbestos abatement, where levels of contamination are low, these complete SAR systems offer a portable air source for one or two workers.

In emergency situations, conditions can deteriorate rapidly. Ambient breathing air can be suddenly filled with smoke or toxic fumes and rapid escape is the only available option. The Saver C N constant flow emergency escape breathing apparatus (EEBA) allows safe, effective and uncomplicated escape from hazardous environments.

Increased stability and added options make this second generation portable air source one of the most versatile in the market. The KKart II provides a portable source of breathing air to supplied air respiratory systems.

Intrinsically safe versions of the dBadge 2 are now available. The dBadge2 has been designed specifically to be used in potentially explosive areas in the oil and gas, petrochemical and pharmaceutical industries as well as being suitable for use in the mining industry.

Introducing the new generation of noise dosimeters from Cirrus Research. The doseBadge5 Noise dosimeter is the result of 20 years of doseBadge development.

Introducing the new low maintenance BW Clip4 multi gas detector from Honeywell. No charging, no maintenance, no hassle. Just clip it on and get the job done. Because for two years it is on.

Iso Amyl Acetate (banana oil) offers the oldest method of testing respirator fit. Its strong, readily identifiable odor will be recognized if respirators do not obtain a fit.

Laser Methane mini (LMm) is a compact handheld gas leak detector that can detect methane gas from a safe distance (0-100M). Utilizing laser technology, methane leaks can be quickly confirmed by pointing the laser beam towards the suspected leak, or along the survey line. This technology removes the need to access elevated places reducing cost and improving the speed of leak detection activities. LMn is ideal for use in industrial, commercial and research environments, anywhere methane could be present and in need of locating or monitoring.

Locate and remediate contamination from all the unusual places. Tools, switches, telephones, doorknobs, handles, etc. all offer exposure potential to the unsuspecting unprotected worker.

Male and Female Luer lock available in a variety of sizes.

Many drinking water systems add fluoride to their water to help their residents prevent tooth decay. To achieve a fluoride concentration of about 1 PPM, a hydrofluorosilicic acid or sodium fluoride solution is metered into the process at a rate that is proportional to total plant flow. However, flow control problems may result in a loss of chemical feed or over-feed condition. An on-line fluoride monitor can provide reliable control of chemical addition for a consistent fluoride concentration.

Measure damaging UV (ultraviolet) light in the environment or museums with this light meter.

Measure the RF strength of Wi-Fi and LAN, cell phone, radio and TV transmission towers, wireless cameras and microphones.

Measurement and control of pH is important in a wide variety of industries. Water and wastewater, boiler feed water, food processing wash water, chemical plant make-up water and many other aqueous systems requires reliable pH monitoring.

MetriNet, derived from Network Metrics, is a low power modular system for monitoring water quality parameters and collecting data at remote locations. This system is ideal for monitoring drinking water distribution systems, greenhouse water delivery systems, produce section misting systems and other clean water applications.

Monitor light levels anywhere with fast, stable and accurate responses. Results are easily read on the extra large digits. The color and cosine corrected sensor meets CIE photopic spectrum.

Monitoring combustible or toxic gases in areas with condensing levels of moisture often results in premature sensor failure. Water condensing on sensor surfaces or within the sensor flame arrestor can be difficult to avoid due to widely variable ambient conditions.

Monitoring suspended solids in wastewater and industrial process water can be useful for either process control or for alarming of unusual conditions.

NAViSEER Personnel Tracking System is an inertial navigation device with optional GPS capability.  NAViSEER utilizes the latest technology and provides an interface for integration with both civilian and military GPS devices.

Nextteq Airtec breathing air test kits include everything needed to measure contaminant levels in compressed gas and supplied air.

Nextteq LLC short term detector tubes for Kerosene.

Nextteq LLC short term detector tubes for Limonene & LPG.

Nextteq LLC short term detector tubes for chemical starting with O.

Nextteq LLC short term detector tubes for gasoline.

Nextteq LLC short term detector tubes for water vapor.

Now available again in the US. The ChemPro 100i is a handheld detector for field detection and classification of Chemical Warfare Agents (CWAs) and selected Toxic Industrial Chemicals (TICs). It provides industry leading sensitivity and false alarm rejection in the most user friendly and low maintenance package in its class.

Nylon tube connectors in a variety of sizes.

ONESuit^® Flash 2 is a chemical protective suit, offering the highest level of protection against chemical/biological agents as well as chemical flash fire resistance and thermal protection. Designed to allow for excellent maneuverability and user comfort, ONESuit^® Flash 2 comes standard with Saint-Gobain's new ONESuit^® Hazglove-91 high performance chemical protective gloves.

ONESuit^® Hazglove-91 is a high performance CBRN protective glove with unsurpassed comfort and dexterity that provides maximum protection against chemical and biological hazards. It is produced using Saint-Gobains CORETech^® barrier technology, providing ultimate broad range chemical protection and is certified to NFPA 1991 (2016 ed) with optional liquefied gas and flash fire escape protection. The glove features an internal chemical barrier liner and an outer aramid glove which form a permanently joined single piece glove that will not invert during use.

ONESuit^® Pro2 is the most affordable chemical protective suit certified to the NFPA 1991 standard, offering the highest level of protection against chemical and biological agents. This is achieved at a price comparable to less protective garments. Designed to allow for excellent maneuverability and user comfort, ONESuit^® Pro2 comes standard with Saint-Gobain's new ONESuit^® Hazglove-91 high performance chemical protective gloves. ONESuit^® Pro2 provides maximum protection at a minimum price.

On line monitoring of Ammonia in water is of increasing importance due to the increased emphasis on nutrient reduction in lakes, streams and estuaries.

Originally released for high ppm hydrogen calibration gas (50-500 ppm), the GENie EC module now supports all of ACD's electrochemical family of gases.

Our gas mixtures for filling disposable pressure vessels are produced gravimetrically (by weight) using sensitive modern balances capable of weighing the relatively heavy cylinders to accuracies of ± 0.1 gm.

Packed with features, the standard Gastec Gas Sampling Pump is the only pump you need for measuring gas and vapor concentrations quickly and accurately.

Peracetic acid (PAA) is an extremely strong oxidizer widely used in the food industry for disinfection of piping systems and processing equipment.

Perfect for storing APR's cartridges and other respirator accessories such as fit testing kits, storage bags and cleaning supplies.

Perfect, low cost, portable means of cooling breathing air while keeping workers comfortable and productive. Available in low pressure and high pressure models.

Poor air quality may cause tiredness, inability to concentrate and even illness (i.e. Sick Building Syndrome).

Potassium Permanganate (KMnO₄) is a strong oxidizer used in the water industry for reduction of organics in raw water. It is also used for control of zebra mussel problems at raw water intake structures. Continuous monitoring of low permanganate concentrations allows operators to adjust chemical feed rates and achieve target values. Chemical feed problems that result in either too little or too much residual can be quickly identified and corrected.

ProRae Guardian CloudServer service simplifies sharing of instrument data with multiple remote sites in real time an empowers decision makers with critical information in emergency response situations.

ProRae Guardian helps incident commanders and safety managers improve safety through real time remote monitoring of wireless gas and radiation detector networks. ProRae Guardian SDK (Software Development Kit) provides third party product vendors and systems integrators the ability to integrate real time data from ProRae Guardian with external networks such as SCADA, public warning and predictive analytics systems.

ProRae Guardian represents an advanced generation of real time wireless gas detection software and serves as a mobile command center for all your threat detection needs.

Protege ZM is a single gas detector for carbon monoxide, hydrogen sulfide or oxygen. It features a hibernation mode for extra operating life

Providing permanent chlorine residual records normally means purchasing a residual chlorine monitor and connecting the output of the monitor to a separate recorder. ATI's Series B20 provides an integrated solution to this problem.

Purchase a MultiRae Benzene through 5/31/18 and receive $500 off of the list price. The MultiRAE Benzene multigas monitor is a groundbreaking new development for gas detection. The MultiRAE Benzene is the industry’s first wireless portable six-gas monitor for low-level, benzene-specific, VOC and multigas gas detection. MultiRAE Benzene detects benzene from 0 to 200 ppm with 0.1ppm resolution by filtering out other VOCs and gases to eliminate cross-interference.

Quantifit - The Gold Standard in Respirator Fit Testing. The OHD Quantifit offers an impressive array of advantages that can dramatically improve your respirator program. The OSHA and CNP Redon protocol takes as little as two to three minutes and you will know within 10 seconds whether the respirator user has a basic fit or not.

Rae Systems' Hand pump if for use with Rae's line of gas detection tubes.

Rae Systems' MultiRae Lite is a perfect wireless monitoring solution for personal protection. It can monitor up to six gases and thrives in confined space entry situations. This tool comes in either with an internal pump or diffusion monitor and is compatible with more than 30 sensor options allowing it to fully meet the monitoring requirements of any application.

Rae Systems' large selection of colorimetric gas detection tubes offer quick, on the spot measurements of a wide range of toxic and combustible gases and vapors.

Rae Systems' ppbRae 3000 is a state of the art VOC gas detector for monitoring at the parts per billion (ppb) level. This device uses a new generation of photo ionization detector (PID) and features both temperature and humidity compensation for improved accuracy. It includes built in correction factors for over 200 compounds and is suitable for use in any hazardous environment.

Remove impurities from the ambient air with these single use tubes for true zero calibration of your Rae Systems gas monitors.

Replacement photo ionization detector PID lamps, calibration gas, probes and accessories for MiniRae 3000 by Rae Systems PIDs.

Replacement photo ionization detector PID lamps, calibration gas, probes and accessories for MiniRae 3000, ppbRae 3000 and Ultra Rae 3000 by Rae Systems PIDs.

Reusable storage bags keep equipment contaminant free. These large, 14" x 16" transparent bag with zipper.

Rugged and reliable, the BW Technologies GasAlertQuartto combustible gas detector combines a comprehensive range of features with simple one-button operation. With flexible power options, the GasAlertQuattro portable gas detector is always ready.

Safe and effective removal of chemical contamination from skin should be an integral part of every safety and health program.

Safety Communicator is an industrial grade Android based mobile application and a ruggedized phone that enable real time communication between a worker's personal instrument and a remote monitoring system such as ProRae Guardian

Sensit Gold CGI with its durable design and easy operation will make finding gas leaks fast and accurate. The bright LCD display shows all gas concentrations simultaneously fulfilling any confined space entry requirements.

Sensit PMD is a small, lightweight, battery operated instrument used to survey, pinpoint and grade leaks wherever they occur. The PMD is among the best performing and lowest cost optical instruments that can be used for both walking and vehicle applications.

Series B12 transmitters are loop powered instruments that transmit a 4-20 mA signal linearly proportional to gas concentration. Operated from a 24 VDC power supply, the transmitter will drive loads up to 675 ohms.

Series D12 Digital Gas Transmitter from Analytical Technology features loop powered transmission, loop powered with HART, transmitter with integral relay or a transmitter with MOBUS.

Simultaneously monitor and display up to five atmospheric hazards with the BW Technologies GasAlertMicro 5 series combustible gas detector. Adaptable to a variety of applications, the GasAlertMicro 5 Series has an extensive selection of user settable field options and is available as either a standard toxic gas model, a PID model for the detection of VOCs or an IR model for carbon dioxide detection. Trade in any multi gas detector and receive $75 off a Rae Systems or BW multigas detector. Valid thru 12/31/18.

Single use disposable storage bags with gusset help prevent cross contamination of any personal safety equipment such as respirators or ear muffs.

Smoke generation tubes are designed for use in respirator fit tests or for visualizing air currents. Smoke generation tubes are designed for use in respirator fit tests.

Soak this poncho in cold water for 10-15 minutes for all day cooling. This vest is inexpensive and easy to put on. The vest is reversible so you can easily refresh the cooling process by turning the vest inside out. 1 size fits most.

Spray Socks provide comfortable protection against overspray and other particulates.

Sulfides can be found naturally in well water and can build up in wastewater collection systems due to anaerobic conditions frequently found here.

Sundstrom offers a complete line of particulate and chemical cartridges for their full face and half face respirators.

Supplied air respirators can be used in all environments where filtering devices can be used. Supplied air respirators are well suited if the user is performing hard or sustained work and if the pollutants have poor warning properties or are particularly toxic.

Technologically advanced yet easy to use, the Draeger UCF 6000 thermal imaging camera delivers excellent image quality under the most extreme conditions.

Tetra 3 personal portable gas detector from Crowcon Detection Instruments features one button operation, simple even with a gloved hand and is rugged and weather proof, suitable for today's arduous industrial environments.

The 1st Steps Chemical Classification Kit is a rapid and intuitive screening systems for response to chemical emergencies.

The 2 point acoustical calibrator will calibrate any digital sound meter with a 1" or ½" microphone. It conforms to ANSI S1.4-1984 and IEC 942 1988 Class 2 standards for acoustical calibrators.

The 521 is the fastest sampling rate badge. There are covers on each side of the monitor that can be removed to double the sampling rate. Even with only one cover removed the monitor samples approximately at 30 mL/min, depending on the chemical.

The 5400 Series Full Face Respirator provides the comfort and protection you would expect from North, at an unbeatable price. No other full facepiece in its price range offers such quality, engineering and attention to detail.

The 5500 Series combines the comfort and design of the popular 7700 Series half mask with the low cost and convenience of a disposable. It is compatible with all Honeywell cartridges and filters.

The 7600 Series Full Face Respirator are designed to provide eye, face and respiratory protection while ensuring optimal comfort and performance. Its dual flange silicone seal gives this facepiece superior fitting characteristics.

The 7700 Series is the most comfortable and durable half mask available. Its soft non-allergenic silicone seal provides excellent protection, comfort and fit.

The 9533 Series Blowers you have come to love and rely on just got better! The already industry leading compact design is now even more compact. These blowers have been shortened from 32" to 26" while decreasing the weight by 8 pounds. The Axial an easy to use complete ventilation system. It includes all the most asked for equipment you need for your confined space site.

Allegro has a blower app available from the App store.

The AreaRae Plus Systems by Honeywell is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, and meteorological factors that affect the speed and direction of the gas. Whether you need to protect your community by monitoring a fence line, protect your employees during a maintenance turnaround, or protect your fire and hazmat teams during emergency response, the AreaRae Plus alerts you to threats with local audible and visual alarm.s Plus it works with Honeywell's remote monitoring software to give you a real time view of threat readings from a safe location.

The ATI PortaSens II has been replaced with the PortaSens III. The Portasens III uses the same sensors as the II

The ATI PortaSens II has been updated to the PortaSens III portable gas leak detector. The new PortaSens III is a rugged hand held device used to detect leaks of toxic or otherwise dangerous gas and also to detect oxygen displacement.

The Accuro is a bellows type pump which provides one-hand operation. The Draeger Tube System enables the measurement of more than 350 gases, vapors and aerosols on the spot.

The Apex2 range of sampling pumps combines class beating performance with great new features and is now rated intrinsically safe. Get connected with the Airwave mobile app and easily send data direct to your laptop.

The AutoRae Lite is a high speed and low operation cost bump test and calibration station with data storage in Excel format for use with ToxiRae II.

The Axial an easy to use complete ventilation system. It includes all the most asked for equipment you need for your confined space site.

Allegro has a new CFM Blower Selector available at the App store for iPhone & Android phones.

The BAcomm communication system offers advanced communication flexibility for use with the Panorama Nova mask and wide range of communications equipment.

The BG-4 is no longer available from AFC International

The BW Clip Real Time (RT) single gas detector is part of BW Clip maintenance free family of single gas detectors. It provides the same great functionality as the BW Clip, plus the addition of a real time gas level display and the ability to calibrate the device; providing more solutions to meet your gas detection needs. Gases detected includes Hydrogen Sulfide (H₂S) , Carbon Monoxide (CO), Sulfur Dioxide (SO₂), Oxygen (O₂)

The BW Clip single gas detector is your everyday companion for hazardous environments. The Clip is now available with real time readings of atmospheric gas concentration levels. It operates up to three years maintenance-free. Gases detected includes Hydrogen Sulfide (H₂S) , Carbon Monoxide (CO), Sulfur Dioxide (SO₂), Oxygen (O₂)

The BW Technologies GasAlert Extreme is a long term solution, designed with durability and comfort in mind. The GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models.

The BW Technologies GasAlertMircoClip XL offers the same great features as the GasAlertMicroClip XT combustible gas detector and for a limited time the same price.

The BioHarness is a lightweight, chest-worn strap that incorporates ECG (electrocardiogram) and breathing rate sensors for real time portable physiological monitoring.

The CAL 101 Bump Station is a low cost electrochemical gas generator.

The CAL 101 is a low cost electrochemical gas generator.

The CEL-240 digital sound level meter is a completely new design of sound level meters featuring the power of Digital Signal Processing (DSP) technology and the simplicity and low cost of a traditional analog instrument.

The CEL-244 digital sound level meter is a completely new design of sound level meters featuring the power of Digital Signal Processing (DSP) technology and the simplicity and low cost of a traditional analog instrument.

The CEL-712 Microdust Pro is a rugged, hand held, data logging instrument for real-time detection of airborne dusts, fumes and aerosols.

The Cal 2000 provides unmatched versatility and accuracy in corrosive calibration gases.

The Cal 2000LT is an economical alternative for calibration of corrosive gas detection equipment. It is available with preset flow rates of 0.5 or 1 LPM.

The Casella dBadge2 Noise Dosimeter keeps all the great attributes of the original dBadge but adds incredible features you won't want to do without!

The Chameleon is the most innovative hazardous chemical detection device on the market today! Morphix Technologies has revolutionized simple color change technology and made it rugged to meet the needs of First Responders and military personnel.

The ChromAir badge is a colorimetric direct read monitor and a color comparison chart. It relies on the principle of diffusion, therefore it requires no pump to operate.

The Compressed Air Attachment changes any Sundstrom respirator into a Type C continuous flow supplied air respirator. It is well suited if the user is doing hard or sustained work and if the pollutants have poor warning properties or are particularly toxic.

The Crowcon Clip is a reliable and durable single gas detector that offers a compact and maintenance free solution.

The Crowcon Gasman CO₂ Infrared Gas Detector is carbon dioxide detection you can trust. It is the simplest carbon dioxide instrument for monitoring in ambient air.

The Deluxe SCBA cover kit protects SCBAs from dirt and UV light. Hook and loop closure offers quick access.

The Demand Flow Regulator is for use with 103L, 74L, 58L, 34L or 116L cylinders. The flow rate is determined by demand of the gas detector.

The Digital Type 2 Sound Meter is perfect for testing for OSHA requirements. This unit meets ANSI S1.4 Type 2, IEC 61672.

The Draeger Air Current Kit is useful for the detection of air current to estimate their source, direction and speed.

The Draeger Air Filtration Panel is designed to provide Grade D breathing air to workers with supplied air lines in hazardous of IDLH environments.

The Draeger Bump Test Station is designed to perform a bump test (also known as a function test or challenge test) for portable Draeger Safety instruments with gas.

The Draeger CDR 4500 full face mask was specifically designed for use in civil defense and civil protection.

The Draeger CDS civil defense set utilizes colorimetric Draeger detector tubes, the same tube chemistry used by NATO for many years in single tube detectors.

The Draeger CPS 5900 is the ideal disposable, gas-tight chemical protective suit for hazmat incidents. Where complete protection against hazardous gases, liquids and particles is of the utmost priority, this lightweight garment is the suit of choice.

The Draeger CPS 7900 chemical protective suit is no longer available. Please refer to the Draeger 5900 series suit.

The Draeger HazMat Simultest Kit is based on the Simultaneous Tube Sets I, II & III. These sets are designed to detect gases evolved as the result of a structural fire and to determine organic chemical families.

The Draeger Pac 6000 is a disposable personal gas detector to measure CO, H2S, SO2 and oxygen reliably and precisely in the toughest conditions

The Draeger RAPID Adapter offers a quick, convenient and cost effective way to convert pressure to an Air Purifying Respirator.

The Draeger UCF 7000 thermal imaging camera is intrinsically sales (UL Class 1, Division 2) and offers new levels of security and reliability in potentially hazardous settings.

The Draeger X-Plore 6500 Series is the high comfort silicone full face mask used by professionals in a wide variety of applications. It meets the highest demands for quality, reliability, secure fit and comfort.

The Draeger X-am 5000 is smallest combustible gas detection instrument for up to 5 gases. The Draeger X-am 5000 belongs to a new generation of gas detectors, developed specifically for personal monitoring as well as oxygen and harmful concentrations of CO, H₂S, CO₂, Cl₂, HCN, NH₃, NO₂, PH₃, H₂, NO and SO₂. Two new sensors are available including the Dual O₂/CO and the dual H₂S/CO.

The Draeger X-am 5100 portable single gas detector guarantees that you use the safest methods possible for handling Hydrogen Fluoride, Hydrogen Chloride, Hydrogen Peroxide or Hydrazine - thanks to proven Draeger sensor technology and a device design which is customized to reactive gases.

The Draeger X-plore 1300 - developed on the basis of market demands and customer requirement - sets new standards on comfort levels for filtering facepiece respirators.

The Draeger X-plore 2100 is the reusable alternative to disposable dust masks. The Draeger X-plore 2100 is the ideal solution for people working frequently in dusty environments.

The Draeger X-plore 6300 is the efficient yet low cost breathing mask intended for price conscious users not wishing to compromise on comfort or quality.

The Draeger single cartridge system keeps cartridges and filters out of the wearer's line of vision without sacrificing service life or breathing comfort. the threaded adapter on the cartridges makes change out simple, quick and sure.

The Dust Detective enclosure is an ideal tool for use with the Microdust Pro real time dust and particulate monitor.

The EMF Meter measures electro magnetic emissions from electrical power lines and power transmissions, computers, HVAC, audio/video and other electrical appliances and equipment.

The Flow Check Air Flow Indicator can detect the slightest air movements. It produces a harmless cloud of smoke that floats freely and easily.

The Flow Detective is designed with ruggedness an accuracy in mind. With Casella's world renowned ease of use, calibration of air sampling pumps just got quicker and easier.

The Full Mask Storage Bag is made with a cotton outer fabric and fleece inside to protect the mask. A clear plastic window pocket allows for business card identification.

The G100 portable gas analyzer was specifically designed to monitor carbon dioxide for the verification of incubators in IVF, medical, research and other pharmaceutical markets.

The G110 infrared portable CO₂ gas analyzer has been designed to monitor carbon dioxide for multiple applications including the brewing industry.

The G150 CO₂ gas detector is ideal for indoor air quality measurements, ventilation verification and process operations. The G150 infrared portable CO₂ gas analyzer has improved software, the latest battery technology, USB data communications and flexible sensor options.

The G200 is an advanced nitrous oxide monitor, N₂O Analyzer. It uses a highly accurate non-dispersive IR cell providing superior stability and repeatability, with a measurement resolution of 1 ppm - full range. The range of the G200 is 0-1,000ppm N₂O. The G200 N₂O analyzer is designed to safety check background and breathing zone levels of N₂O (0-1,000ppm).

The G210 is specifically designed for highly accurate measurement and verification of the quality of piped N₂O and oxygen medical gases in hospitals. The G210 can measure N₂O, CO, CO₂ and Oxygen.

The G450, a 4 gas detector, continuously measures and displays readings for up to four gases at the same time including LEL, O₂, CO & H₂S.

The GENie O₃ electrochemical gas generator for ozone calibration gas now with added flow and concentration options. The GENie O₃ is one of the most accurate sources of ozone calibration gas on the market, the GENie O₃ makes calibration of ozone sensors fast and simple.

The GENie QC-1 is the newest gas generator for ammonia calibration gas. By utilizing a sealed glass ampule that is broken for use, the GENie QC-1 is the perfect tool for anyone, calibrating fixed or portable ammonia sensors.

The GT Fire Gas Detector was specifically designed for fire fighters

The GasAlert MicroClip X3, from BW Technologies by Honeywell, delivers a whole new level of reliability in multi gas detection - at an affordable upfront price. It has a three year warranty, an all new oxygen sensor that lasts the life of the detector, the easiest user experience and guaranteed runtime - even in extreme weather.

The GfG G460 combustible gas detector is the world's most advanced multi-sensor atmospheric monitor. The durable G460 continuously measures and displays readings for up to six gases at the same time.

The GfG Micro IV Single Gas Detector is the state of the art successor to the well known Micro III single gas detector. In addition to its simple operation and reliable warning system, the flexible device supersedes all other single gas detectors due to its large memory, an IR interface and a revolutionary docking station. Sensors include oxygen, hydrogen sulfide, carbon monoxide, ammonia, sulfur dioxide, chlorine, phosphine, nitrogen dioxide, hydrogen cyanide, ethylene oxide, chlorine dioxide, hydrogen fluoride, ozone, nitric oxide and hydrogen.

The HXG-3 is an advanced instrument used for detecting and finding the source of gas leaks. The HXG-3 measures combustible gases such as methane, propane, natural gas, pentane and other volatile organic compounds (VOCs).

The HXG2 has been replaced by the Sensit HXG-2d.

The Handy Pak is ideal for use in confined spaces, HazMat response, tank entry and cleaning, sewer maintenance and chemical handling operations among other applications.

The HazMat Kit is designed to aid in the initial assessment of potentially hazardous situations. The detector tubes included in the kit have been selected to utilize a systematic sampling matrix.

The Honeywell BW Max XT II combustible gas detector is the smart, simple, economical way to compliance. Workers feel safe and incidents are minimized so everyone will be able to do more. That means savings realized from business continuity and productivity.

The IntelliDoX system combines smart docking modules and Fleet Manger II software to provide automated instrument management for the GasAlertMicroClip series detectors and Clip detectors, helping your drive productivity, reliability and efficiency.

The M2 Multi-Mold Cassette is a two sided cassette for easier and more efficient use in the field and in the laboratory.

The Macurco CD-6 provides CO₂ detection and automatic ventilation control for conference rooms, classrooms, meeting halls or similar applications. Carbon Dioxide is a colorless, odorless gas that is produced both by people exhaling CO₂ as well as the burning of gasoline, coal, oil and wood. The outdoor concentration can vary from 350-400 ppm or higher in areas with vehicle high traffic or industrial activity.

The Macurco Single Gas Detectors are designed to continuously monitor the ambient environment and notify the user if the level of the target gas reaches the alarm set point for the monitor.

The MeshGuard is a rugged, battery powered toxic gas detector integrated with a wireless mesh radio modem. Key features include extremely fast installation, self-configuration of the network and worldwide approved wireless frequency coverage. Designed for use in harsh environments and easy to service in the field, MeshGuard is a truly unique wireless solution for remote chemical detection in hazardous areas.

The MicroRae four gas portable detector brings enhanced user friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities and the environment and to optimize operations.

The MiniBump is an ultra small gas generator specifically designed for "bump" testing hydrogen sulfide, hydrogen cyanide, chlorine and hydrogen gas sensors. Calibrating cells are now available.

The MiniRae 2000 is no longer available. The MiniRae 3000 has replaced the MiniRae 2000. The MiniRae 3000 is Rae Systems most advanced handheld volatile organic compound (VOC) monitor on the market. Its photoionization detector's (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene to leak detection and HazMat.

The MiniRae 3000 PID from Rae Systems is the most advanced volatile organic compound gas detector with VOC monitoring capabilities on the market. It is useful for industrial hygiene, leak detection or HazMat Response applications

The MiniRae 3000 is the industry standard in volatile organic compound (VOC) detection. These PIDs have an extended range of 0-15,000 ppm and includes automatic humidity compensation. This instrument has a number of features which makes it perfect for a wide range of applications.

The MiniRae Lite from Rae Systems is the most reliable handheld portable volatile organic compound (VOC) monitor on the market. Its photo ionization detector's (PID) range of 0 to 5,000 ppm makes it an ideal instrument for application ranging from environmental to construction.

The Model C12-17 is a stand alone gas transmitter designed to detect potentially hazardous concentrations of combustible gases in ambient air.

The Model E12-15 IR Infrared Gas Detector is a rugged reliable microprocessor based intelligent gas detector. The E12-15 can be used to monitor from ppm levels of explosive levels of ammonia gas.

The Model Q46H Chlorine monitor is an upgraded version of the proven Q45 system for continuous monitoring of free or combined chlorine.

The MultiRae is Rae Systems latest advancement in the wireless portable chemical detector market which boasts a 01 to 5,000 ppm PID sensor range. The MultiRae supports a wide variety of sensors (over 30) such as NDIR and electrochemical to fulfill the demands of any applications. The sensor options can be easily changed in the field with onboard libraries include 190 VOCs and 55 combustible gases.

The North SF Chem Overboot was developed to provide general chemical resistance for a variety of application including disaster preparedness and incident response.

The ONESuit^® Ventilation System provides ventilated cooling to fully-encapsulating models on OneSuit^®. In addition to enhancing comfort when wearing ONESuit^® products, the ventilation system improves visibility by preventing fogging of the suit visor.

The ORSA is a diffusion sampler for monitoring organic compounds. The contaminant molecules from the ambient air are adsorbed by the activated charcoal which is later analyzer using laboratory methods.

The Optimus Yellow sound level meters are a range of state of the art sound level meters.

The PS200 detects all possible combinations of LEL, O2, CO & H2S including single gases

The PS500 can be configured to detect up to 5 gases including VOCs.

The Pac 3500 has been discontinued and replaced with the Pac 6500. Please contact AFC for further information and price quotes.

The Pac 5500 has been discontinued and replaced with the Pac 6500. Please contact AFC for further information and price quotes.

The Pac 7000 has been replaced with the Pac 8000 from Draeger. Please contact AFC for more information and price quotes.

The Portable Air Filtration Panel provides Grade D breathing air to workers with supplied airlines in hazardous or IDLH environments.

The PureFlo Hydra PAPR (Powered Air Purifying Respirator) full face respirator features a waist mounted, twin filter blower unit with multiple lightweight headtops available including a welding shield. It features an audible LED that alerts the user to either a low battery, particulate filter change or low flow. Headtops are interchangeable with the PureFlo Airline SAR. An APF 1000 with neck cape or ADF 25 with loose fitting face seal. Please Note: Interactive Safety was acquired by Gentex Corp.

The PureFlow Airline SAR is for applications where continuous flow, low or high pressure air is available. Vortex tubes allow the user to cool or heat the temperature of the helmet ±20-25°. Multiple headtops including a welding version are available and are interchangeable with the PureFlo Hydra. Note: Interactive Safety was acquired by Gentex Corp in 2014.

The Pureflo ESM powered air purifying respirator (PAPR) helmet is the ultimate personal safety solution for industrial environments providing all in one, head, eye, face and respiratory protection against hazardous airborne contaminants, sparks, flying debris, chemical and molten metal splashes. Please note: Interactive Safety was acquired by Gentex Corp.

The Pureflo P ESM PAPR (Powered Air Purifying Respirator) Full Face Respirator helmet is the ultimate personal safety solution for pharmaceutical manufacturing providing all in one, head, eye, face and respiratory protection against hazardous airborne contaminants, sparks, flying debris, and chemical splashes. Please Note: Interactive Safety was acquired by Gentex Corp.

The Pureflo Pureweld ESM with Nexgen powered air purifying respirator (PAPR) helmet is the ultimate personal safety solution for welding applications and industrial environments.

The Purelite XStream is a self contained lightweight powered air purifying visor system providing all in one protection against dust, fumes and particulates, combined with eye and face protection against impact and liquid splashes. The Purelite Xstream is not approved by NIOSH under 42 CFR part 84.

The Pureweld ESM full face respirator is perfect for welding fume protection including Hexavalent Chromium and Manganese. For maximum mobility and protection from particulate hazards the head mounted, completely self-contained PAPR (Powered Air Purifying Respirator) with no trailing lead or hoses has a built in electronic systems management (ESM) light bar and audible alarm alert. The ESM alerts the user to low battery, filter change or low flow. The flow rate available is 7.6 or 8.2 CFM. Each unit includes a wide vision ASNI compliant primary lens, APR 1000 with neck Cape or APF 25 with loose fitting face seal.

The Q22 Specialty pH/ORP sensors are designed for use with all non-ATI analyzer systems and generic panel meters, allowing these end users to utilize the same robust features of the standard ATI Q25 sensors.

The Q46H/79PR Total Chlorine Measurement System is a highly versatile on line monitoring system designed for the continuous measurement of total chlorine in solution. This direct measuring system does not require the addition of chemical reagents to measure total chlorine. The Q46H/79PR is well suited for potable water systems, water reuse systems, cooling towers , aquariums, and for monitoring wastewater treatment effluents.

The QC-50 from ACD provides a quick and easy method of checking the performance of gas detection systems. The QC-50 is currently available for ammonia, hexane, hydrogen chloride and toluene.

The QRae 3 has replaced the QRae and is the newest confined space detector from Rae Systems. Trade in any multi gas detector and receive $75 off a Rae Systems or BW multigas detector. Valid thru 12/31/18.

The QRae 3 is a durable and versatile diffusion or pumped one to four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, sulfur dioxide, hydrogen cyanide and now ammonia and phosgene. New sensors now available including ammonia, chlorine and nitrogen dioxide.

The RAM 744 is the ideal monitor for portable applications and where space is limited. It is mounted with the filtration system, allowing for rapid response and eliminating the possibility of sample lines becoming blocked or crimped. The flow rate is fixed so there are no touchy flow meters to adjust.

The Rae Systems AreaRae Steel will be discontinued on 11/30/2017. The AreaRae Pro and Plus are replacements for the AreaRae Steel. Service parts will be available until 2019 or while available.

The Rae Systems EchoView Host mini controller for closed loop wireless solution elevates worker safety to the next level.

The Rae Systems MeshGuard Gamma radiation detection monitor is a key building block of the MeshGuard intelligent network of connected sensors for gamma radiation detection in industrial and environmental monitoring applications.

The Rae Systems MultiRae Lite is a portable combustible gas detector that provide versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from - the broadest selection in its class - it can test for VOCs, combustibles and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. Trade in any multi gas detector and receive $75 off a Rae Systems or BW multigas detector. Valid thru 12/31/18.

The Rae Systems MultiRae Pro is the industry leading wireless device that monitors both chemical threats and gamma radiation and is the only multi threat monitor with parts per billion precision.  It also gives you the flexibility to swap out 25 different sensors for a range of threats, including VOCs, toxic gases, combustibles, oxygen levels as well as gamma radiation detection. 

The Rae Systems MultiRae Pro is the industry's first wireless multi threat detection tool that combines continuous monitoring capabilities for gamma radiation, volatile organic compounds (VOCs), toxic, combustible gases and oxygen with Man Down Alarm functionality in one highly portable instrument.

The Rae Systems MultiRae is the most advanced wireless portable chemical detector on the market. The MultiRae's cutting edge PID sensor detects volatile organic compounds (VOCs) and supports over 30 electrochemical, NDIR and catalytic sensors to detect up to five additional threats.

The Rae Systems QRae II has been discontinued. We recommend the QRae 3 as a replacement. Please contact AFC International at 800.952.3293 for more information. Trade in any multi gas detector and receive $75 off a Rae Systems or BW multigas detector. Valid thru 12/31/18.

The Rae Systems ToxiRae Pro PID is the world's smallest wireless volatile organic compounds (VOC) monitor. The ToxiRae Pro PID takes worker protection to the next level by providing safety professionals wireless access to real time instrument readings and alarm status (including man down alarm) from any location for better visibility and faster response.

The Rae Systems UltraRae 3000 is the most advanced Benzene Specific Monitor on the market.

The Rae Systems by Honeywell AreaRae Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors that affect speed, direction and behavior of gas - for enhanced situational awareness. It works with Honeywell's remote monitoring software, so you can see the real time threat readings, alarm status, location of each AreaRae Pro and much more - and make faster, more informed safety decisions.

The Rae Systems compact, waterproof SensorRae 4R+ sensor conditioning station keeps up to six extra sensors warmed up and ready for quick deployment in MultiRae or ToxiRae Pro monitors.

The RaeGuard 2 PID is a fixed photoionization detector (PID) that measures a broad range of volatile organic compounds (VOCs).

The RaeLink3 Mesh enables Rae Systems personal gas and radiation detectors and select 3rd party monitors to communicate wirelessly with ProRae Guardian safety monitoring software so that commanders and emergency response coordinators can make better decisions in real time.

The RaeLink3 allows integration of many Rae Systems gas and radiation monitors and select third party devices into an AreaRae wireless detection system.

The RaePoint is a multi function wireless infrastructure component for Rae Systems wireless gas detection systems. This key building block can operate as an access point in hazardous areas to communicate with wireless gas detectors to enable integration FMC-2000 or PC based ProRae Guardian host controllers.

The Rapid Deployment Kit (RDK) Detector Package includes 4 versatile GPS enabled AreaRae Pro monitors, each with up to 7 sensors and RAEMets. With the RDK, you have everything you need to create a perimeter and set up a command station up to two miles from the site.

The Rapid Deployment Kit (RDK) will be discontinued on 11/30/2017. The AreaRae Pro and Plus RDK Kits are replacements for the AreaRae Inert. Service parts will be available until 2019 or while available.

The Remote CO Alarm System is attached to any air source or filter panel and alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm.

The Rescue Pak is ideal for use in confined space, HazMat response, tank entry and cleaning, sewer maintenance and chemical handling operations among other applications.

The SEC 3000 gas detector is a unique design combining intrinsically safe and explosion proof approved standards. This allows for quick and simple field installation of a calibrated sensor module into the gas detector in hazardous locations with power applied.

The SEC 3100 AIM is used in conjunction with the SEC 3100 explosion proof transmitter or SEC 3100 DIN transmitter.

The SEC 3100 DIN provides interface capabilities for the SEC3000 Toxic and Oxygen gas detector and SEC Millennium infrared gas detectors.

The SEC 3100 LIM is used in conjunction with the SEC 3100 explosion proof transmitter or SEC 3100 DIN transmitter.

The SEC 3100 provides interface capabilities for the SEC 3000 gas detector and SEC Millennium infrared gas detectors.

The SEC 3500 HMI is an operator interface dedicated to communicating to the SEC 3100 gas detector, SEC relay controllers, SEC 3100 AIM and SEC 3100 LIM units. The SEC 3500 has output capabilities to the plant control system. It uses an industry standard RS485 communication protocol to interrogate up to 254 Network Devices.

The SEC IREvolution ammonia detectors are designed to be used as an upgrade in the same applications where electrochemical sensors have been applied.

The SEC Millennium ACE hydrocarbon detectors are designed to be used as an upgrade in the same applications where catalytic bead sensors have been applied.

The SEC Millennium ETOAMB hydrocarbon detectors are designed to be used as an upgrade in the same applications where catalytic bead sensors have been applied.

The SEC Millennium LC hydrocarbon detectors are designed to be used as an upgrade in the same applications where catalytic bead sensors have been applied.

The SEC Millennium WS hydrocarbon detectors are designed to be used as an upgrade in the same applications where catalytic bead sensors have been applied.

The SEC Millennium hydrocarbon detectors are designed to be used as an upgrade in the same applications where catalytic bead sensors have been applied.

The SEC Millennium hydrocarbon gas detectors are designed to be used in the same applications where catalytic bead sensors have been used.

The SEC infrared carbon dioxide detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors.

The SR200 is Type C Continuous Flow Supplied Air Respirator with filter backup. It is particularly well sited if the user is performing hard or sustained work, and if the pollutants have poor warning properties or are particularly toxic.

The SR345 Protective Hoods is designed for use together with Sundstrom Half and Full Face respirators. The hood is made of chemical resistant materials and provides protection against splashing and dripping of most solvents and acids in relatively low concentrations.

The SR64 protective hood is intended for use together with Sundstrom Half Masks or Full Face Masks with cartridges or with the SR307 compressed air attachment.

The SafeAir Badge provides an immediate visual indication when a specific chemical hazard is present. The sensor in the SafeAir badge is constructed from a coated indicator layer rather than impregnated paper.

The Sensit CO is perfect for testing ambient air and flue gas sample. The instrument features a powerful pump, hot air probe and bright LCD display.

The Sensit Gold 100 is a portable leak detector and multi gas confined space monitor with expanded in  field capabilities. This detector pinpoints natural gas or propane gas leaks and is designed to provide personal protection from potentially hazardous conditions.

The Sensit Gold G2 is the most versatile and user friendly, Sensit available. The G2 can be used for inert gas operations to detect combustible gases in oxygen-free environments.

The Sensit Gold is a portable gas leak detector and multi gas confined space monitor in one user friendly instrument. As an investigative tool, the Sensit Gold LEL sensor is designed to find the source of combustible gas leaks fast. Additional sensors provide personal protection from hazardous gas conditions.

The Sensit HCN is perfect for testing ambient air and hot gas samples. The instrument features a powerful pump, ot air probe and bright LCD display. The Sensit HCN is available with an optional carbon monoxide sensing feature.

The Sensit P100 Single Gas Monitor is an exceptionally rugged personal gas monitor. It raises the bar in durability. The housing is constructed of durable ABS plastic and shock absorbing material to protect the instrument from the rigors of field use. The instrument is sealed to maintain the integrity of the IP65 rating.

The Sensit TKX is the perfect choice when locating hard to find natural or propane gas leaks. Low maintenance and a low initial cost make this product the ideal choice for the budget conscious.

The SensorRae has been replaced with the SensorRae 4R.

The Series 100 regulators from PortaGas are designed to maintain constant flow rates so you get real accurate monitor calibrations even as the cylinder pressure drops.

The Series B14 Receivers are compact electronic modules that provide local alarm, display and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three or four wire 4-20 mA transmitters.

The Series F12 Gas Transmitter is an Intrinsically Safe (IS) version of ATI's explosion proof D12 transmitter. In its standard form, it is designed for detection of a variety of toxic gases in hazardous area applications requiring IS devices.

The Silver Shield® material is made from Norfoil®, a remarkable lightweight, flexible laminate which resists permeation and breakthrough by an array of toxic and hazardous chemicals.

The Simultaneous Test system offers three different sets which are used with an adapter (purchased separately) and a Draeger Pump for the semi-quantitative determination of inorganic gases and organic vapors.

The Small Talk voice amplifier is a communication accessory for all Sundstrom respirators. The microphone is mounted onto the exhalation valve seat of the respirator.

The SolarPak is an intrinsically safe way to extend the operating time of the Rae PowerPak. The SolarPak is certified for Class I, Division 1 (ATEX Zone 0) hazardous locations.

The Solo is easy to operate and to service with an extensive selection of sensor options.

The Sound Level Pen is the smallest, lightest, easiest to carry sound meter in the world. Despite its small size the Pen is a full function Type 2 sound meter perfect for testing OSHA requirements and most other sound meter applications.

The SoundSign is a highly visible noise activated warning sign that has been designed for use in environments where there is a need to clearly warn or indicate when a preset noise level is reached.

The Spectacle Kit is designed to support prescription lenses within the Sundstrom full face respirator and supplied air respirator.

The Sundstrom Dust, Mold & Particulate Kit includes one silicone half mask or TPE half mask, one P100 particulate filter, ten pre-filters and enclosed in a storage box.

The Sundstrom Escape Hood is designed for evacuation in the event of fire and or chemical emission accident. The hood is based on a Sundstrom silicone half mask, which is mounted in a hood made of flame resistant material.

The Sundstrom Pro Pack includes one mask, one OV/SD/CL/HC/HF cartridge, one P100 particulate filter, five pre-filters, pre-filter holder, manual, id label and is enclosed in a storage box.

The Sundstrom Pro paint & Body Repair Pack includes one SR90-3 half mask, one OV/SD/CL/HC/HF cartridge, one P100 particulate filter, five pre-filters and enclosed in a storage box.

The Sundstrom Respirator Kit for Wildfires includes one silicone half mask, one P100 particulate filter, ten pre-filters, pre-filter holder, spark arrester and enclosed in a storage box.

The Sundstrom SR100 half mask air purifying respirator is made of silicone and is available in two sizes, S/M and M/L. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance.

The Sundstrom SR200 full face respirator is intended for use when maximum safety and breathing comfort are required. The SR200 is made of silicone and is equipped with three inhalation valves and two exhalation valves.

The Sundstrom SR500 system is a belt mounted powered air purifying respirator (PAPR) with tight fitting face pieces, loose fitting respirators or loose fitting hoods that protects against particulates, gases and vapors or a combination.

The Sundstrom Silica Kit includes one mask, one P100 particulate filter, ten pre-filters and enclosed in a storage box. The kit is excellent for use in concrete, stone, cement, fracking, foundry work applications.

The Sundstrom Starter Pack includes one SR90-3 half mask, one organic vapor cartridge, one P100 particulate filter, five pre-filters and enclosed in a storage box.

The Sundstrom half mask respirator offers 1,667 times more protection than an N95 respirator at less cost. NIOSH requires P100 class filters to eliminate 99.97% of particles.

The T100 Rotary Vane sampling pump is lightweight, low maintenance and has a sampling range of 0-30 LPM. It is excellent for sampling asbestos (25mm cassettes), lead (37mm cassettes) and mold.

The TEM Cassette is designed for asbestos final clearance testing.

The ToxiRae Pro is the world's first wireless personal monitor for carbon dioxide. The Rae Systems ToxiRae Pro provides safety professionals with wireless remote access to real time instrument readings and alarm status for better visibility and faster incident response.

The Type 1 Sound Meter meets IEC651 and ANSI S1.4 specifications for a type 1 sound meter. The range is 30-130 dB in both the A and C decibel frequency weighting scales with 0.1 dB resolution and an accuracy of +/1 dB (125 Hz ~ 4 kHz).

The UCF 9000 packs wide ranging functionality into a lightweight device that helps you tackle any imaging task with just one hand.

The UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today.

The VeriAir Flex patented volumetric pump and sample bag design lets you rapidly collect an air sample in a bag, saving you time and money.

The WBGT reads relative humidity (RH), air temperature (TA), dew point, wet bulb globe temperature (WBGT) and black globe temperature (TG).

The Welding Shield is for use the Sundstrom Full Face Respirators or Supplied Air Respirators.

The X-plore 5500 full face mask is designed on the basis of proven, reliable technology. The double layer face seal with triple sealing action ensures reliable protection and a secure leak-free seal regardless of your face shape.

The automatic tube pump X-act 5000 is the first all in one solution designed for measurements with Draeger short term tubes and for sampling tubes and systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols.

The complete kit offers a portable, lightweight air source for one, two or three workers. They are offered with one, two or three comfortable half mask supplied air respirators, a ¼ hp ambient air pump, ¾ hp pump or 1 ½ hp pump and 50 or 100 feet of breathing hose.

The first Tube Warmer without the need for electricity.

The full mask system provides a portable air source for one, two or three respirator users. They include one, two or three full mask supplied air respirators, a ¼ hp ambient air pump, ¾ hp pump or 1½ hp pump and 50 or 100 foot of breathing air hose.

The model A21 is a gas sample pumping system designed to draw samples from ducts or hard to access locations and deliver the samples to gas sensors located in a more convenient area.

The most cost effective way to manage the calibration and bump testing of BW's portable gas detectors is through the MicroDock II automated test and calibration system.

The new GVS Elipse half face respirator has been designed to fit the contours of your face. It is compact, lightweight and flexible which adapts perfectly.

The one door, heavy duty steel cabinet includes 3 adjustable shelves, handle and inspection window. This durable, convenient cabinet also includes a label kit with 17 custom labels.

The optional welding shield is designed to accept standard welding plates in 2" x 4" or 4" x 4" sizes.

The ppbRae Plus PID has been discontinued and replaced with the ppbRae 3000.

The quality of breathing air can be tested by this 4 gas detector in accordance to air purity standards according to ANSI specifications by means of quantitative measurements of the contaminants.

The robust Draeger Pac 6000 is your reliable companion under tough conditions.

The ultimate docking station for instrument maintenance for GfG's G450 and G460 gas detectors.

The unit is perfect for environmental testing anywhere. It combines an air speed meter, air temperature meter, RH meter, light meter into a single compact unit weighing only 5.5 ounces. Own the equivalent of 4 meters for about the price of any one of them.

The updated Graphic Display Sound Meter features a large bar graph display, A&C decibel frequency weighting scales among other features.

The updated Sundstrom SR900 is an completely new system where the user can easily customize the product based on application and specific needs. It includes a remote filter.

The use of ozone gas is increasing rapidly in a wide variety of applications, such as water treatment, odor control and food processing. ATI's Model A23-14 is a portable generator designed to produce an ozone gas concentration below 1 ppm.

The world's only Chip Measurement System (CMS) makes spot measurements as easy as 1, 2, 3: insert chip - start measurement-read measurement result on the LCD display. The Draeger CMS combines the advantages of Draeger Tubes with those of an optoelectronic analysis system. Two components define the system: the analyzer and the substance specific chip.

These cases are designed for the storage of wall mounted SCBA's. They provide protection from dust, moisture and damaging plant environments.

These kits offer a qualitative OSHA compliant fit test for disposable and reusable dust and mist respirators.

These vests are designed to protect and provide comfort to workers who must function in environments with excessive heat, including construction, firefighters, welders and factory workers.

This 37mm, MCE cassette is 0.8µm mixed cellulose ester and designed for lead sampling.

This Anemometer/Thermometer is perfect for use in HVAC, environmental studies, hazardous spill clean ups, electrostatic precipitators and all types of air flow measurements.

This Hot Wire Anemometer reads air velocity and temperature and functions as a type K or J thermometer.

This Point of Attachment (POA) Air Control System connects to any breathing air source. It's housed in a Pelican carry case that can be wall mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve.

This Vane Anemometer reads air velocity and temperature and functions as a type K or J thermometer.

This Vortex Vest delivers constant and adjustable cooling and heating. The Vortex Vest is especially popular for workers in confined space as well as foundries, steel mills, asbestos abatement and paint baking operations.

This air vest is designed for cooling personnel in circumstances where air conditioning is not feasible.

This black Corudra nylon bag is padded on all sides except the top. A cord connected double zipper pull on the top allows for easy storage and removal of equipment.

This box features a carrying strap with a belt hook for added stability. Made of impact resistant plastic, it is roomy enough to hold a mask and a canister.

This heat stress meter features bright multi-color LCD backlights corresponding to OSHA's heat stress alert levels.

This inexpensive heat stress meter provides accurate determinations of the heat stress index based on the cumulative effect of air temperature, air movement, RH and radiant heat.

This instrument is ideal for monitoring indoor air quality in crowded public spaces with potentially high levels of CO₂ (carbon dioxide) such as offices, factories, classrooms, hospitals and hotels.

This kit allows wearers to fit Draeger facepieces with their own prescription lenses.

This kit provides a fast, safe and easy method of performing qualitative fit checks on air purifying respirators.

This meter combines an anemometer, hygrometer, thermometer, sound and light meter into a single unit.

This meter will measure air speed, humidity, light and temperature with or without batteries.

This modular kit easily and seamlessly integrated with any PureFlo ESM and ESM+ PAPR System to provide workers all in one respiratory, head, neck and shoulder protection against radiant heat, sparks and splashes.

This portable Deluxe HazMat kit provides immediate identification of unknown chemicals and can detect contaminants competitors miss.

This portable HazMat kit provides immediate identification of unknown chemicals and can detect contaminants competitors miss. This kit offers accurate detection of up to 48 gases and vapors.

This pump is designed to be used outside the contaminated work environment to bring clean, breathable air into supplied air respirator or hood.

This regulator demonstrates a commitment to calibration innovation for the Environmental and Industrial Hygiene markets by being the first to develop a Flow Matching Regulator.

This small hand-held unit can be used to measure sound levels anywhere. 2 scales cover the 40-80 dB and 80-120 dB ranges, with an accuracy of ± 3.0 dB.

This unique sound meter enables remote sound level readings using a detachable probe. It features an RS232 computer interface, AC output and a coiled probe that extends to 9'.

This vest uses cooling inserts to keep the wearer comfortable. It is ideal for under HazMat suits and other protective clothing.

Three storage boxes are available for Sundstrom respirators. The SR344 is intended for storage of larger respirators such as the SR200 Full Face mask.

Too often, the diagnosis of CO poisoning has been misdiagnosed because the symptoms are mistaken for the flu or even fatigue. Now with the MicroCO, firefighters and emergency providers can diagnose carbon monoxide poisoning easily, quickly and inexpensively right on the scene thus preventing possible long term cardiac and/or neurological damage.

Toxic chemicals such as pesticides, aromatic amines, and isocyanates can permeate gloves and protective clothing. Wide variations in the chemical resistance of gloves and protective clothing compositions make protective equipment selection difficult—especially if using mixtures of chemicals in the workplace.

Tube Fitting Kits - Assorted tube fittings in a case for all gas detectors.

Turbidity is a general indicator of the optical clarity of water and is defined as the amount of light scattered by particles in solution.

Tygon tubing is crystal clear, flexible and superior in quality to provide a longer life and greater versatility than other plastic tubing.

UltraRae has been replaced with the UltraRae 3000.

Used to reduce high pressure through a series of tee and flexible pigtail connectors, the low pressure Airline Cascade Kit offers you the ease of ordering all the parts you need for your system with one part number.

Various hazardous gases can be generated by clandestine drug manufacturing laboratories. The physiological effects of these gases can vary from mild irritation, choking, severe nausea or rendering investigating personnel unconscious.

Water treatment processes using ozone gas have steadily increased over the past 20 years. Ozone has proven to be an extremely effective oxidant, removing organic carbon from raw water and destroying most pathogens. As a result, ozone treatment is now widely used in the semi-conductor, pharmaceutical and food and beverage industries. In addition, many large cities are now using ozone to improve the quality of the drinking water distributed to their customers.

We offer an extensive line of gas and vapor cartridges and particulate filters to satisfy numerous industrial applications. All North cartridges and filters are approved with all North air purifying half masks and full facepiece respirators.

When work gets hot, the Draeger Comfort Vest CVP 5200 is always ready to use because it delivers the cooling action itself.

Wherever respiratory protection is needed, e.g. at chemical and steel plants, automobile and shipping industry, maintenance, utilities supply and disposal, Draeger X-plore half masks can provide you a perfect solution.

While the theory of monitoring conductivity is simple, in practice it can be very frustrating. While simple 2-electrode sensors are inexpensive and can provide accurate data, continuous monitoring of even relatively clean water can foul the electrodes and degrade the measurement.

With advanced functionality and simple user interface, the 63x range or sound level meters is designed to make occupational and environmental noise measurements quickly and easily.

With use microwave oven door seals may wear enabling hazardous microwaves to leak out.

Workplace environments that compromise the quality of air you breathe demand reliable solutions. The Draeger X-plore 8000 full face respirator powered air-purifying r