X-act 5000 Automatic Tube Pump for Draeger Tubes

The automatic X-act 5000 tube pump is the first all in one solution designed for measurements with Draeger short term tubes and for sampling tubes and systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols. The automatic tube pump is compatible with Draeger short term tubes as well as sampling tubes and systems. The robust housing supports the use of  the pump to perform the daily measuring tasks under tough conditions.

The components of the pump are corrosion resistant and the pump is additionally equipped with a user replaceable filter which traps sulfur trioxide aerosols protecting the pump for up to two years. The display is backlit to enable use of the pump under poor lighting conditions. All Draeger short term tubes and accessories can be used with the Draeger X-act 5000. The IS approved Draeger X-act 5000 can be used for confined space applications and in explosive gas atmospheres – always ready wherever fast and reliable on-site measurements are required.

The key principle is the ability to provide the required flow characteristics of the Draeger short term tubes, while also providing the option to be used with sampling tubes and systems requiring constant flow. Compared to the Draeger accuro hand pump, this new concept reduces the average measurement time of the Draeger short term tubes in case of a high number of strokes. The internal pump is also designed to use extension hoses up to a length of 30 M.

The handling of gases, vapors and aerosols has never been easier. The automatic tube pump directs the air to be measured through the appropriate Draeger Tubes effortlessly. It is comfortably carried with one hand or using the shoulder strap and is easily operated, even wearing protective gloves. A simple and intuitive menu structure provides the user efficient operation with just a few button presses. Using the password protected menu repetitive operating modes can be set.

A barcode printed on the label on the backside of a Draeger short term tube box contains all relevant measurement parameters. Simply sliding the barcode over the barcode reader of the pump, automatically transfers the name of the substance to be measured, the number of strokes and the measuring range of the display. The required steps to carry out the measurement are simplified with the X-act 5000 and the possibility of making an error is reduced to a minimum.

Draeger short term tubes are calibrated for measurement in ambient air. To evaluate measurements in technical gases, the properties of the technical gas must be taken into consideration. Technical gases have a different viscosity than ambient air. Therefor, the flow of the pump must be set accordingly. Following the operating steps in the mode, Measurement in Technical Gases, the X-act 5000 will automatically be adjusted to the require flow parameter and the measurement result can be read directly.

Depending on the sampling tubes or systems, the required parameters for the test can be set directly without the need for an external flowmeter. The X-act 5000 automatically adjusts the flowrate. After setting the sampling time the pump can immediately be started. At the end of the measurement the pump will stop automatically. The set data, the elapsed time and the pumped volume will be indicated on the display.

Specifications

Number of Strokes Adjustable, 1 to 199 strokes
Stroke Volume 100 ml
Flow Rate Range 0.1 to 2.0 LPM
Resolution 0.1 to 1.0 LPM: 0.1 LPM ±5%
Resolution 1.0 to 2.0 LPM: 0.2 LPM ±5%
Sampling Time Adjustable, up to 12 hours, depending on flow rate, resolution in steps of 15 min (default) or 1 min
Display 2 Parts: segment and matrix
Use of Extension Hose Up to 30 Meters
Operating Temperature 41 to 104°F
Relative Humidity 0 to 95% non-condensing
Battery NiMH, Charge Time <4 hours
Alkaline: 6 AA cells
Battery Capacity > 1,000 strokes, sample taking: up to 12 hours, depending on adjusted flow rate
Size 7″ x 9″ x 4.5″
Weight 3.5 pounds
Approvals ATEX: Ex ia IIC T4 Ga, Ex ia I Ma, I M 1 / II 1 G
UL: Class I, Div 1, Groups A, B, C, D, Class II, Div 1 Groups F, G, +5°C ≤ Ta ≤ 40°C Temp Doe T4 Exia
IP 64

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description
Catalog No.
X-act 5000 Tube Pump includes shoulder strap, NiMH battery, charger 4523617
Shoulder Strap 4523565
Car Charger 4523511
Extension Hose, 1M includes Adapters 6400561
Extension Hose, 3 M includes Adapters 6400077
Extension Hose, 10M includes Adapters 6400078
Extension Hose, 15M includes Adapters 6400079
Extension Hose, 30M includes Adapters 6401175
Plug for Tube Tip Reservoir 4523560
X-act 5000 Calibration Tube 8103651
X-act 5000 Dosage Tube for Tech Gas 6527562

Downloads

X-Act 5000 Tube Pump Datasheet

Product Enquiry