Saint-Gobain ONESuit Ventilation System
The ONESuit Ventilation System provides ventilated cooling to fully-encapsulating models on OneSuit®. In addition to enhancing comfort when wearing ONESuit® products, the ventilation system improves visibility by preventing fogging of the suit visor.
For pricing, please call 1-800-952-3293 or email sales@afcintl.com
Description
The ONESuit Ventilation System provides ventilated cooling to fully-encapsulating models on OneSuit®. In addition to enhancing comfort when wearing ONESuit® products, the ventilation system improves visibility by preventing fogging of the suit visor. Ventilation air is supplied through a unique closed-loop tube system which has strategically located holes for concentrating air low around the torso and visor locations – where is count most! This design is also easier to use because it eliminates potential for getting caught up in tubing.
Features
- 2 handed operation of ventilation to prevent accidental switching
- 4 ventilation flow settings – 0, 2, 30 or 100 LPM
- Kink-proof tubing
- Snag resistant tubing
- Visor anti-fog
- Large easy, to turn flow rate knob
Ordering Information
This optional accessory may be ordered by adding the suffix-VS to the standard ONESuit® item number along with one of two different factory configurations with item number below. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
Description |
Catalog No.
|
From External Air Source | 25407M |
From an External or Internal SCBA Air Source in combination with supplied air for breathing | 25403M |
Downloads
ONESuit Ventilation System Literature
ONESuit® is registered trademarks of Saint-Gobain Performance Plastics Corporation.