Saint-Gobain ONESuit Hazglove-91

ONESuit Hazglove-91 is a high performance CBRN protective glove with unsurpassed comfort and dexterity that provides maximum protection against chemical and biological hazards. It is produced using Saint-Gobain’s CORETECH® barrier technology, providing ultimate broad range chemical protection and is certified to NFPA 1991 (2016 Ed.) with optional liquefied gas and flash fire escape protection. The ONESuit Hazglove-91 features an internal chemical barrier liner and an outer aramid glove which form a permanently joined single piece glove that will not invert during use.

Features

  • Certified to NFPA 1991 (2016 Ed.)
  • Single component design provides outstanding dexterity and superior comfort compared to multi-component glove systems
  • Integrated construction ensures ease of use by preventing glove re-inversion
  • CORETECH® material technology gives extreme chemical protection
  • Aramid outer ensures superior protection from cuts and punctures and flame protection including chemical flash fires

Chemical Permeation Data

Chemical/Requirement 1 Hour Total
Acetone <0.14
Acetonitrile 2.7
Acrolein 0.4
Acrylonitrile 0.41
Anhydrous Ammonia (gas) 2.33
1,3-Butadiene (gas) 0.99
Carbon Disulfide <0.02
Chlorine (gas) <0.20
Dichloromethane <0.17
Diethyl amine <0.02
Dimethyl Formamide <0.10
Dimethyl Sulfate <0.10
Ethyl Acetate <0.03
Ethylene Oxide (gas) <0.05
Hexane <0.03
Hydrogen Chloride (gas) 1.86
Methanol <0.14
Methyl Chloride (gas) <0.04
Nitrobenzene <0.07
Sodium Hydroxide, 50% w/w <0.20
Sulfuric Acid, 96.1% w/w <0.20
Tetrachloethylene <0.11
Tetrahydrofuran <0.11
Toluene <0.09

Physical, Thermal, Operational Data

Performance Requirement Test Method Requirement Result
Glove Composite Material (Palm) Flame Resistance ASTM F1358 (Section 8.7) After flame time ≤2 seconds, no melting See Flash Fire Data
Cut Resistance ASTM F1790
(Section 8.15)
Blade travel distance ≥20mm at 150 grams 45
Puncture Resistance ASTM F1342
(Section 8.16)
Puncture force ≥ 22N 83
Cold Temperature Performance ASTM D747
(section 8.12)
Bend moment ≤ 0.057 NM 0.003-(MD)
0.003-(XMD)
Glove Composite Material (Back) Flame Resistance ASTM F1358
(Section 8.7)
Afterflame time≤ 2 seconds, no melting See Flash Fire Data
Cut Resistance ASTM F1790
(Section 8.15)
Blade travels distance ≥20 mm at 150 grams 45
Puncture Resistance ASTM F1342
(Section 8.16)
Puncture force ≥ 22N 34
Cold Temperature Performance ASTM D747
(Section 8.12)
Bend Moment ≤ 0.057 Nm 0.002-(MD)
0.001-(XMD)
Hazglove-91 Dexterity ASTM F2010
(Section 8.17)
Percent increase in bare handed control > 600% 326

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

Description
Catalog No.
ONESuit® Hazglove-91, Small 43502M
ONESuit® Hazglove-91, Medium 43503M
ONESuit® Hazglove-91, Large 43504M
ONESuit® Hazglove-91, X-Large 43505M
ONESuit® Hazglove-91, XX-Large 43506M

Downloads

Saint-Gobain ONESuit® Hazglove-91 literature

Saint-Gobain ONESuit® Hazglove-91 Certifcation

ONESuit® is a registered trademarks of Saint-Gobain Performance Plastics Corporation.

CoreTech® is a registered trademark of Saint-Gobain Performance Plastics Corporation

Product Enquiry

You may also like…