ppm PID Replacement Sensor for MultiRae & MultiRae Pro

$652.00

Call for availability

SKU: C03-0912-002

Manufacturers: ,

Category:

Genuine ppm PID Replacement Sensor / Lamp for MultiRae and MultiRae Pro gas detectors from Rae Systems by Honeywell.

All specifications have been verified under the following environmental conditions:

  • Temperature: 68°F
  • Relative Humidity (non-condensing): 50%
  • Ambient Pressure: 1 atm (1,013 mbar)

Refer to the Technical Note TN-114 for a glossary of terms used on this page

PID Replacement Sensor / Lamp Specifications

Sensor Type 10.6 eV PID
Range 0 – 5,000 ppm
Resolution 0.1 ppm Isobutylene
Zero Drift/Span Drift <10% signal/day
Bias/Equilibration No Bias/10 minutes after installation
Storage Life 3 months in sealed container
Operating Life 1 year in air
Calibration Gas 100 ppm and 1,oo0 ppm Isobutylene
Warranty 1 year from date of shipment

Downloads

Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for ppm PID Replacement Sensor

Technical Note: TN-106 – Gases Detected with a PID Lamp

Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.

Additional information

Weight .5 lbs

Product Enquiry