Phosphine H Replacement Sensor for MultiRae

Name: AFC International
Brand: AFC International
SKU: C03-0976-100
Availability: OutOfStock

$0.00

Ships directly from the manufacturer, shipping times may vary.

Out of stock

SKU: C03-0976-100 Category: Rae Systems by Honeywell

Description

Genuine Phosphine H Replacement Sensor for MultiRae gas detectors from Rae Systems by Honeywell.

All specifications have been verified under the following environmental conditions:

Temperature: 68°F
Relative Humidity (non-condensing): 50%
Ambient Pressure: 1 atm (1,013 mbar)

Refer to the Technical Note TN-114 for a glossary of terms used on this page

Phosphine H Replacement Sensor Specifications

Sensor Type	Electrochemical
Range	0-20 ppm
Resolution	0.1 ppm
Drift	<2% signal/month
Bias/Equilibration	No Bias/10 minutes after installation
Storage Life	6 months in sealed container
Operating Life	1 year in air
Calibration Gas	5 ppm Phosphine in Air or 10 ppm Hydrogen Sulfide in Air
Temperature Range	-4°F to 122°F
Storage Temperature Range	32°F to 68°F
Pressure Range	Atmospheric ±10%
Operating Humidity	15 to 95% rH non-condensing
Warranty	1 year from date of shipment

Cross Sensitivity Data

Gas	Concentration	Response
Carbon Monoxide	1,000 ppm	0 ppm
Ethylene	100 ppm	0 ppm
Hydrogen	1,000 ppm	0 ppm
Hydrogen Sulfide	15 ppm	12 ppm
Ammonia	50 ppm	0 ppm
Sulfur Dioxide	5 ppm	0.9 ppm

Special Notes: Using a surrogate gas such as Hydrogen Sulfide can result in decreased accuracy. For enhanced accuracy performance, we recommend calibrating the Phosphine H sensor with Phosphine calibration gas. An alternative solution is to perform a read-back measurement with Phosphine calibration gas aftr calibrating with Hydrogen Sulfide. Then decide if performance is good enough for the intended application.

Downloads

Technical Note: TN-114 – Sensor Specifications and Cross Sensitivities for Phosphine H Replacement Sensor

Disclaimer: Technical Note TN-114 presents specifications, cross sensitivities and calibration information on select Rae Systems by Honeywell sensors. All specifications presented in this Technical Note reflect the performance of standalone sensors. For instrument specifications, please refer to product datasheets and manuals. Actual sensor characteristics may differ when the sensor is installed in different instruments. As sensor performance may change over time, specifications provided are for brand new sensors.