X-am 2500 with Datalogger Multi Gas Detector
Draeger Safety’s X-am 2500 Multi Gas Detector accurately detects flammable gases, oxygen, carbon monoxide, nitrogen dioxide, sulfur dioxide and hydrogen sulfide and is the only 1-4 gas monitor that you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.
The X-am 2500 has a large, easy to read, liquid crystal display. All gas readings are shown simultaneously and resize automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in alarm will be highlighted and will alternate with the alarm level indication of A1 or A2.
The Draeger X-am 2500 can operate for more than 12 hours with either alkaline batteries or with rechargeable NiMH batteries. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without an Ex sensor installed is typically more than 250 hours.
The X-am 2500 is compatible with Draeger’s X-dock testing and calibration station. X-dock is Draeger’s solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump test in 8 to 15 seconds with more than 40% less gas consumption than competitive instruments. The X-am 2500 is also compatible with the Draeger Bump Test Station.
The innovative, Catalytic Ex sensor has a high degree of drift stability with a high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than 5 years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring, according to IEC/EN 60079029-1, from methane to nonene.
The Draeger X-am 2500 has Ex approval for zone 0 for user safety in areas subject to explosion hazard. Additionally, it is not sensitive to electromagnetic radiation, e.g. from wireless devices and is water and dust resistant in accordance with protection class IP67.
An optional external pump with a hose up to 98 feet is available for use in tanks and shafts or when searching for leaks. The switch from diffusion to pump operation can be handled quickly and easily without tools or screws.
The Draeger X-am 2500 portable gas detector is comfortably worn thanks to its low weight and ergonomic design and gas can enter the unit from above and from the front – even if the instrument is inside a pocket or if the front gas entry is accidentally covered. The practical two button control panel and easy menu navigation allow for intuitive operation while the integrated protective rubber coating and sensors not sensitive to shock provide additional safety in case of impacts or vibrations.
The X-am 2500 can store the highest gas readings for the Ex and toxic gas sensors and the lowest reading for the oxygen sensor. These readings can be easily reset after a gas exposure without having to turn the monitor off and on.
|Battery||NiMH: >12 hours
Alkaline: >12 hours
Alkaline without EX Sensor: >500 hours
Audible: Multi tone >90 dB at 30 cm
|Temperature||-4 to 122°F|
|Pressure||700 to 1300 mbar, 20.7 to 38.4″ Hg|
|Humidity||10 to 95% Rh|
|IP Protection||IP 67|
|Charging Time||< 4 hours|
|Data Logger||Can be read out via IR > 1,000 hours with 4 sensors and a recording interval of 1 reading per minute|
|Size||1.85″ x 5.12″ x 1.73″|
|Approvals||UL: Class 1, Div 1, Groups A, B, C & D, Temp Code T4/T3
ATEX: II 2G EEx ia d IIC T4/T3; I M2 EEx ia d I, CSA: Class I, Div 1, Groups A, B, C & D, Class II, E, F, G, Temp Code T4/T3, IECEx: Ex ia d I/IIC T4/T3
CE Mark: Electromagnetic compatibility
|Warranty||3 years on monitor and sensors, 2 years on optional T4 NiMH battery pack|
|Carbon Monoxide (CO)||2 ppm|
|Hydrogen Sulfide-LC (H2S)||0.1 ppm|
|Oxygen (O2)||0.1% Vol|
|Nitrogen Dioxide (NO2)||0-50 ppm||0.1 ppm|
|Sulfur Dioxide (SO2)||0-100 ppm||0.1 ppm|
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email email@example.com
|X-am 2500 Gas Detector, add sensors below||8323900|
|Combustible Sensors, 0-100% LEL||6812950|
|Carbon Monoxide Sensor, 0-2000 ppm||6813210|
|Hydrogen Sulfide Sensor, 0-100 ppm||6811525|
|Nitrogen Dioxide Sensor, 0-50 ppm||6810884|
|Oxygen Sensor 0-25% Vol||6810881|
|Sulfur Dioxide Sensor, 0-100 ppm||6810885|
|NiMH Battery & Charger Kit||8318785|
Accessory Ordering Information
|Pump Kit includes USB charger, wall plug and shoulder strap||
|Confined Space Entry Set includes USB Cable, wall plug, 5M hose, float probe and shoulder strap||
|Dust/Water Stop filter for Remote Sampling Pump||4543759|
|Hand Pump Kit with 10 feet of Tygon Tubing||4594585|
|Water Trap, Dust/Mist Filter for Hand Pump||4523078|
|NiMH Battery Kit includes battery, charge cradle & power supply|
|NiMH Battery Pack||8318704|
|GasVision Software for data download & management|
|CC-Vision software for calibration & configuration||Free|
|Telescopic Probe, 4.5′||
|Telescopic Probe, 6.5′||
|Sample Probe Replacement Filter, 3 Hydrophobic & 10 Particulate||4511290|
|Float Probe, order hose separately||6802337|
|Tygon Sampling Hose, 10′||4594501|
|Teflon-Lined Sampling Hose, 5′||4594112|
|Bump Test Station w/o gas||8319131|
|Protective Rubber Boot||8321506|
|Deluxe Instrument Case||4543755|
|Deluxe Instrument/Pump Case||4543935|
|Nylon Transport Case||
|50% LEL CH4, 100 ppm CO, 25ppm H2S, 17% Vol O2 Calibration Gas||4594655|
|USB-IR Communication Cable||8317409|